mycarforum: 2014 Mazda 3 part 86

Can Mazda2 join? :P

Mazda 3 Outing
19th February 2016
Friday Night
Agenda : TBA - Meet n Greet

Add your name if interested,
share numbers later

1. rider83
2. suave-sedan
3.
4.
5.
6.
7.
10.
11.
.
.

Hi guys, where do you guys buy the plastic dip at 20 dollars? The shop the I used to buy selling 30 dollars.. My plastic dip is running low.. Should have bought one bottle in the states.. The states one bottle only cost 7.50 usd. Haha.

Check out qoo10

It feels a bit stiff, but the difference is almost unnoticable compared to stock. The car is sitting quite low, especially the front with the Mazdaspeed kit. Be very careful when you drive up a ramp. I scraped the bottom of my lip just now going up a ramp.

Sharing some pics with you guys. The wheel gap still look a bit huge in the photo, but it is actually only about 2-finger-high without passengers inside.

Thks! Looks good! Hopefully my body kit will not cause prob.. Mine is different type.

Is MP Sun Xueling one of us?� [laugh]

�

Photo of her car from her FB page:

�

12553069_985215598219432_773321382907140

Edited by Alheych, 29 January 2016 - 12:12 AM.

Check out qoo10

Thanks..

Got one year road tax? Free 3/5 years servicing? Petrol vouchers boh?

Bo petrol vouchers leh...

Mazda 2/3/5/6�Outing

19th February 2016
Friday Night
Agenda : TBA - Meet n Greet

Add your name if interested,
share numbers later

1. rider83
2. suave-sedan
3. UncleSky
4.
5.
6.
7.
10.
11.
.
.

I also got the Pro-kit for my 2. If only there is the sports line for our ride.

Yup, Pro-Kit. I am actually happy with the drop now. Just got to go slow in some places.

The Eibach Sportline has too much drop. I have never considered it. I am wondering whether Eibach has come out with the Sportline for Mz3.

�

Yeah, this is similar to the one offered by the SE usually. I got mine from outside tho.

It's not bad if your ride height is stock. You can still drive it a bit chorlo. It only becomes dangerously low after the car is lowered haha. Found that out the hard way.

Yes bro you're right.

Should not have any problems if on stock spring. I'm on stock with kit thrown in by TEK... no problem.

Edited by Mz3SP0907, 29 January 2016 - 06:45 AM.

[thumbsup]

Oh yes, Sherman.

�

Hi,

Any idea which version suits our Mz3 sedan? Axela (2 cabin), Axela (3 cabin), Xing1 Cheng3 (2 cabin), or ?Xing1 Cheng3 (3 cabin)?

Mazda 3 Sedan should be Axela 3 cabin. You may want to look at the photo and agar agar check the shape is it same or not

Btw i didn't buy the boot mat. So i can't say good or not.

Edited by EddHooi, 29 January 2016 - 06:59 AM.

Yeah, this is similar to the one offered by the SE usually. I got mine from outside tho.

It's not bad if your ride height is stock. You can still drive it a bit chorlo. It only becomes dangerously low after the car is lowered haha. Found that out the hard way.

Hahahaa. Hope you ain't regretting lowering your car bro. Lift it back up if needed lo lol! Thanks for clarifying.

I figured this is the best place to ask; who has a good SE to recommend? The one I met in the showroom at Ubi was alittle aloof.

Is MP Sun Xueling one of us?

Photo of her car from her FB page:

Got chance, I Park mine beside hers...

I figured this is the best place to ask; who has a good SE to recommend? The one I met in the showroom at Ubi was alittle aloof.

�

wat u getting bro? �I hv a few names

wat u getting bro? �I hv a few names

�

Just looking - just want a Mazda SE I can hang on to? And not tell me to come back after CNY?!

Just looking - just want a Mazda SE I can hang on to? And not tell me to come back after CNY?!

�

wtf...really....

�

MX-5 ha... [thumbsup]

�

Was toying with the idea of CX-5 but see how ka

wtf...really....

�

MX-5 ha...

�

Was toying with the idea of CX-5 but see how ka

�

Yes you had your fair share of Mazdas [thumbsup] � So, PM me the recommended SEs that are still there? [laugh]

Yes you had your fair share of Mazdas � So, PM me the recommended SEs that are still there?

�

lol. :grin: �...yup

�

lemme go chk my books

Got chance, I Park mine beside hers...

Rub shoulder rub rub rub hehe

Mazda 3 Sedan should be Axela 3 cabin. You may want to look at the photo and agar agar check the shape is it same or not

Btw i didn't buy the boot mat. So i can't say good or not.

�

Ok, Thanks bro! :)

Anyone doing servicing at LK service centre? I'm here now for my 5K 'servicing'.

Rub shoulder rub rub rub hehe

I invite her into this forum? Lolz...

She is gonna be busy

I invite her into this forum? Lolz...

She is gonna be busy

Yes! U know her meh?

The poem she gave at the elections changed the entire sentiments on e ground if u recall hahaha

Anyone doing servicing at LK service centre? I'm here now for my 5K 'servicing'.

TGIF bro! So shiok!

What are going to do for this 5k servicing? 1k servicing is just look see look see only right?

Yes! U know her meh?

The poem she gave at the elections changed the entire sentiments on e ground if u recall hahaha

I am supposed to know her de, but missed the chance. Lolz....

I am supposed to know her de, but missed the chance. Lolz....

Wa biang. ????! Rub shoulder abit lei...

TGIF bro! So shiok!

What are going to do for this 5k servicing? 1k servicing is just look see look see only right?

5K also look see look see. The SA spent 15mins looking at my car for dents and dings haha

5K also look see look see. The SA spent 15mins looking at my car for dents and dings haha

Got change engine oil? I asked before if can include change engine oil after 1k, my SE said there is no change of engine oil during 1k. I asked again saying I buy my own and get the servicing guys to help me change? My SE said nope, saying the servicing guys know my car condition better.

Hi guys, was informed by my se that I have gotten my Coe but my ride won't be coming till march... Anyway, ordered Mazda 3 soul red and would like which pps is recommended? I'm thinking brila and ceramic pro 9h. But other are welcome. My main concern is scratches cos my estate has a tedency to have car scratch... Easy maintanence is also of a concern but not priority.

Anyone doing servicing at LK service centre? I'm here now for my 5K 'servicing'.

I just left ubi..30K hee

I just left ubi..30K hee

�

What do they do at 30K servicing?

Hi guys, was informed by my se that I have gotten my Coe but my ride won't be coming till march... Anyway, ordered Mazda 3 soul red and would like which pps is recommended? I'm thinking brila and ceramic pro 9h. But other are welcome. My main concern is scratches cos my estate has a tedency to have car scratch... Easy maintanence is also of a concern but not priority.

�

Bro,

�

I havent gotten my car yet and I have shortlisted the pps that I would go to. According to some bros here, pps wont be able to prevent scratches, which I think it makes sense. And this probably even more true since you live in scratchy estate. Just saying so that you wont have too high an expectation and then fall from there.�

�

My expectation of a good pps would be:

�

1. Somewhat scratch resistance from flying sand while driving

2. Paint protection, paint to look as good as new after a few years

3. Easy to wash. Like using water and micro fibre cloth. I am not a fan of chemicals

4. Looks glossy, shiny and smooth (criminal, just remind of a song by michael jackson). Also mean no stain from bird droppings and whatever after cleaning

�

Some shops offer a higher end pps package that includes X numbers of car wash and dent repair after PPS. U can check with them

Thks! Looks good! Hopefully my body kit will not cause prob.. Mine is different type.

Any body kit will reduce our car's ground clearance haha. Don't worry lah, bro. It's not so bad. Just pay attention when going up or down a steep ramp at some parking buildings.

Bro,

I havent gotten my car yet and I have shortlisted the pps that I would go to. According to some bros here, pps wont be able to prevent scratches, which I think it makes sense. And this probably even more true since you live in scratchy estate. Just saying so that you wont have too high an expectation and then fall from there.

My expectation of a good pps would be:

1. Somewhat scratch resistance from flying sand while driving
2. Paint protection, paint to look as good as new after a few years
3. Easy to wash. Like using water and micro fibre cloth. I am not a fan of chemicals
4. Looks glossy, shiny and smooth (criminal, just remind of a song by michael jackson). Also mean no stain from bird droppings and whatever after cleaning

Some shops offer a higher end pps package that includes X numbers of car wash and dent repair after PPS. U can check with them

Thanks bro. I also think that having scratch proof coating is a hard to come by. Anyway, does anyone use brila before? Not much of a review from it.

My fav stance is slammed.

Any body kit will reduce our car's ground clearance haha. Don't worry lah, bro. It's not so bad. Just pay attention when going up or down a steep ramp at some parking buildings.

�

Got change engine oil? I asked before if can include change engine oil after 1k, my SE said there is no change of engine oil during 1k. I asked again saying I buy my own and get the servicing guys to help me change? My SE said nope, saying the servicing guys know my car condition better.

No oil change for 5k servicing. They just see see look look only like all the bros have gone through lol. You can tell them if you feel some glitches on your car tho. They will check and rectify it for free.

What do they do at 30K servicing?

Fyi

Attached Thumbnails

My fav stance is slammed.

Like those in Japanese car mod scene? That's like overly done lol. They have to use cardboard to exit an almost flat surfaced carpark.

Haha those will have to be achieved with very negative cambers front and rear. As long as your ride from ground to bottom of the kit have 1/2 a pack of cigarette height you are good to go.

�

Looks good but many places can't go. Experienced that on previous rides. Till now have not kitted my ride and only lowered with Eiback Pro-Kit. If only there is sportsline for our ride.

Like those in Japanese car mod scene? That's like overly done lol. They have to use cardboard to exit an almost flat surfaced carpark.

�

Some member here managed to have Mazda's SA agreed to change the EO at a price. Most got refused straight in their face.

Got change engine oil? I asked before if can include change engine oil after 1k, my SE said there is no change of engine oil during 1k. I asked again saying I buy my own and get the servicing guys to help me change? My SE said nope, saying the servicing guys know my car condition better.

�

Some member here managed to have Mazda's SA agreed to change the EO at a price. Most got refused straight in their face.

�

It seems like I got a "straight in the face" treatment� :TT_TT:

Haha those will have to be achieved with very negative cambers front and rear. As long as your ride from ground to bottom of the kit have 1/2 a pack of cigarette height you are good to go.

Looks good but many places can't go. Experienced that on previous rides. Till now have not kitted my ride and only lowered with Eiback Pro-Kit. If only there is sportsline for our ride.

I don't know about Mz2, but Corksport make 2-2.25" drop springs for Mz3. That's the lowest that is available to Mz3 right now.It leaves no wheel gap at all.

Damn is it? I only leant about this company recently. More familiar with the JDM brands and i almost bought TEIN but ST Powered service was **** up so i went with my buddy Lyonel.

I don't know about Mz2, but Corksport make 2-2.25" drop springs for Mz3. That's the lowest that is available to Mz3 right now.It leaves no wheel gap at all.

�

Thats common bro.�

It seems like I got a "straight in the face" treatment�

�

I just saw the OMV of hatchback is 100 bucks lower than a sedan in the december avg omv in the onemotoring site, how come ah.. :(

Mazda 2/3/5/6�Outing

19th February 2016
Friday Night
Agenda : TBA - Meet n Greet

Add your name if interested,
share numbers later

1. rider83
2. suave-sedan
3. UncleSky
4.
5.
6.
7.
10.
11.
.
.

�

yikes!�Working that evening! Else I'll come down [:(]

yikes!�Working that evening! Else I'll come down

�

How late are u going to work into the night?

�

I prefer a later timing.... Having dinner with CFO�

Unfortunately by the time I'm done it�will be close to 11+ pm :TT_TT: ��

�

If u guys are still there I'll pop by!

Edited by Zcold, 29 January 2016 - 12:15 PM.

Damn is it? I only leant about this company recently. More familiar with the JDM brands and i almost bought TEIN but ST Powered service was **** up so i went with my buddy Lyonel.

�

Thats common bro.�

�

I had wanted to get the TEIN H-Tech springs initially. I called ST Powered and I was quoted $650 before installation, alignment and GST! They are trying to chop a carrot I think.�

Mine also deluxe but the Mazda 2. You will be surprised at what some SEs gives their customers.�

�

A kiss from [gorgeous] � SE .... [inlove]

�

:grin: � :grin:

wat u getting bro? �I hv a few names

�

Sure not those comes from way below, way too early as gate still closed�... :serious-business:

�

:XD: �� :XD:

Edited by Picnic06, 29 January 2016 - 12:43 PM.

Some member here managed to have Mazda's SA agreed to change the EO at a price. Most got refused straight in their face.

Yup,

�

I got an "oil change" on 1k. But i tell you guys the most unbelievable thing. They change the oil only....NB......If i have more time i will definately ask them to on the spot change the filter for me sia. The SA still have the cheek to tell me the filter very expensive (something like that) WTF!!

Yup,

I got an "oil change" on 1k. But i tell you guys the most unbelievable thing. They change the oil only....NB......If i have more time i will definately ask them to on the spot change the filter for me sia. The SA still have the cheek to tell me the filter very expensive (something like that) WTF!!

By right change oil will need to change filter. Anyway, better than no change at all.

By right change oil will need to change filter. Anyway, better than no change at all.

This coming 5k. I will ask them to do OIL CHANGE & CHANGE FILTER. Lol!!

For that price you can get Eibach WITH installation, GST and alignment added in.

I had wanted to get the TEIN H-Tech springs initially. I called ST Powered and I was quoted $650 before installation, alignment and GST! They are trying to chop a carrot I think.�

�

Yeah i remember you oil filter wasn't changed. Thats damn cock.�

Yup,

�

I got an "oil change" on 1k. But i tell you guys the most unbelievable thing. They change the oil only....NB......If i have more time i will definately ask them to on the spot change the filter for me sia. The SA still have the cheek to tell me the filter very expensive (something like that) WTF!!

�

:a-confused:

A kiss from � SE ....

�

�

�

A kiss from � SE ....

�

�

�

sorry not brokeback mountain here :S

Damn pissed off this morning...:(

�

SJP3509C fail to signal early and fail to check Blind�Spot!!!�

�

It time to change my mickey mouse horn!!!

�

https://www.youtube....h?v=wbVL6vvoTbg

�

Edited by Ken-sanki, 29 January 2016 - 03:46 PM.

No joke bro. I also ever encountered this arsehole on the AYE before.� [bounce1]

Damn pissed off this morning...:(

�

SJP3509C fail to signal early and fail to check Blind�Spot!!!�

�

It time to change my mickey mouse horn!!!

�

https://www.youtube....h?v=wbVL6vvoTbg

�

it time to go to JDM...

No joke bro. I also ever encountered this arsehole on the AYE before.�

�

Changed louder horns, this wish driver will also force his way into your lane one.

�

Anyway for horns, any audio shop can do it and with relay added somemore.

it time to go to JDM...

�

No joke bro. I also ever encountered this arsehole on the AYE before.�

�

Same car??

Yup.

Same car??

�

Changed louder horns, this wish driver will also force his way into your lane one.

�

Anyway for horns, any audio shop can do it and with relay added somemore.

�

what horns did you all get?

Damn pissed off this morning...:(

�

SJP3509C fail to signal early and fail to check Blind�Spot!!!�

�

It time to change my mickey mouse horn!!!

�

https://www.youtube....h?v=wbVL6vvoTbg

�

ohhh this exit! always got no brain drivers at this exit.. met so many i decided to exit at the NUS one instead. wait afew more traffic lights better than having sudden shocks.

Collecting car for 30K svc. Replace gasket, oil filter, engine oil. Total $263.14 before gst. Also asked them to check for updates to mazda connect.

next time, I will stay far far from SJP3509C

Yup.

�

next time, I will stay far far from SJP3509C

�

I better make a mental note of this car too...

If your MZD connect cosftware is not Ver 56 then don't upgrade.

Collecting car for 30K svc. Replace gasket, oil filter, engine oil. Total $263.14 before gst. Also asked them to check for updates to mazda connect.

�

If your MZD connect cosftware is not Ver 56 then don't upgrade.

Haha prob too late. Something wrong with latest firmware? Im not sure what was my version prev.

The next road name will pop up on the Mzd connect screen even though navo is not on and even when you put the display to sleep. That blocks out the battery life of your mobile device and also the level of BT connection level display.

Haha prob too late. Something wrong with latest firmware? Im not sure what was my version prev.

�

Haha prob too late. Something wrong with latest firmware? Im not sure what was my version prev.

�

Check with u update mzdconnect issit foc?

Damn pissed off this morning...:(

SJP3509C fail to signal early and fail to check Blind Spot!!!

It time to change my mickey mouse horn!!!

The mickey mouse horn lol!

maybe tmr I will install Air Horn

The mickey mouse horn lol!

�

The next road name will pop up on the Mzd connect screen even though navo is not on and even when you put the display to sleep. That blocks out the battery life of your mobile device and also the level of BT connection level display.

The road name will pop up even with the older version. Mine still version 51.

Do Mazda do a car wash for u during 1k servicing?

Mine wont pop up, but how to see which version we using?

The road name will pop up even with the older version. Mine still version 51.

Damn pissed off this morning...:(

SJP3509C fail to signal early and fail to check Blind Spot!!!

It time to change my mickey mouse horn!!!

That's my first and only mod!!

The next road name will pop up on the Mzd connect screen even though navo is not on and even when you put the display to sleep. That blocks out the battery life of your mobile device and also the level of BT connection level display.

�

Don't have an option in the menus to change that?

The road name will pop up even with the older version. Mine still version 51.

Mine was fine when I was on V51. My friends still on V51 also don't face what I faced.

Don't have an option in the menus to change that?

nice bro!!!

�

nice bro!!!

Thks bro!

Yes i got mine washed during 1k.

Do Mazda do a car wash for u during 1k servicing?

Yes i got mine washed during 1k.

Thanks. I am asking because I am thinking whether to do PPS before or after 1k servicing. Think I just do it after 1k servicing then.

Thanks. I am asking because I am thinking whether to do PPS before or after 1k servicing. Think I just do it after 1k servicing then.

�

Since PPS are usually done by groomers, the PPS team will usually do a thorough wash and 'correction' of your paint when they are working on your car. Having PPS does not mean you don't ever have to wash your car, but of course if you are for whatever reason concerned about the quality of the wash given during servicing, makes sense to do your PPS after the servicing wash

I think u can request for no wash of your car after the 1k servicing. I would return for car wash at the pps shop only

U welcome bro. There are many bros done their PPS and i believe they can advise u.
Btw, which grooming shop u want to go for?

Thanks. I am asking because I am thinking whether to do PPS before or after 1k servicing. Think I just do it after 1k servicing then.

Guys my experience with perfectshadesg. Tried to make appointment 2 weeks ago was told no need rush. So planned on 30th, today check with them said only after 8pm. But told them cant cos I got appointment. So they said today after 8pm, around 7pm today told me 9plus. Wait till 10.10pm no show call and ask them said delay. Was so piss off... i am also a paying customer and i called u 2 week in advance to book a time. You said no need rush but end up putting my slot till so late.

After that please instruct them not to wash or vacuum your ride. I did that earlier for my 5K servicing.

Thanks. I am asking because I am thinking whether to do PPS before or after 1k servicing. Think I just do it after 1k servicing then.

�

Don't get that. Get laser shades. No need to glue the brackets to your ride.�

Guys my experience with perfectshadesg. Tried to make appointment 2 weeks ago was told no need rush. So planned on 30th, today check with them said only after 8pm. But told them cant cos I got appointment. So they said today after 8pm, around 7pm today told me 9plus. Wait till 10.10pm no show call and ask them said delay. Was so piss off... i am also a paying customer and i called u 2 week in advance to book a time. You said no need rush but end up putting my slot till so late.

�

Damn pissed off this morning...:(

SJP3509C fail to signal early and fail to check Blind Spot!!!

It time to change my mickey mouse horn!!!

Damn cb driver. Dun know why they get driving license in the first place. Causing alot of unnecessary road hazard

After that please instruct them not to wash or vacuum your ride. I did that earlier for my 5K servicing.

Don't get that. Get laser shades. No need to glue the brackets to your ride.

bro i also want but we have a problem. ours is rubber magnet might not work. they might also need to gule magnet. Anyway not getting le i wait for group buy here. btw guys the car boot is not flush?

The next road name will pop up on the Mzd connect screen even though navo is not on and even when you put the display to sleep. That blocks out the battery life of your mobile device and also the level of BT connection level display.

I haven't noticed it just now when drvg, will check it out tml.

Check with u update mzdconnect issit foc?

Yeah it's foc! Maps we need to update ourselves though.

Since PPS are usually done by groomers, the PPS team will usually do a thorough wash and 'correction' of your paint when they are working on your car. Having PPS does not mean you don't ever have to wash your car, but of course if you are for whatever reason concerned about the quality of the wash given during servicing, makes sense to do your PPS after the servicing wash

Thanks bro,

My concern is that when should go PPS immediately after car collection. Then 1k servicing is pretty near. Afraid that the SA at Mazda might use chemical and ended up washing away PPS coating if havent bonded nicely with the car. Call me paranoid, i am really a noob in all these.

Secondly, i thought of driving and getting used to the car during the first 1k. In case there is any chip or dent, i can get Mazda to help me fix them during 1k servicing, right? Once i am used to driving then get PPS.

After that please instruct them not to wash or vacuum your ride. I did that earlier for my 5K servicing.

Don't get that. Get laser shades. No need to glue the brackets to your ride.

Bro, why cant vaccum?

U welcome bro. There are many bros done their PPS and i believe they can advise u.
Btw, which grooming shop u want to go for?

There are quite a number of packages around. I still deciding but probably not going anything above $1k.

Those people will vacuum and wash without any care for the ride. Rather I go and Do it on my own during the weekends.

Thanks bro,

My concern is that when should go PPS immediately after car collection. Then 1k servicing is pretty near. Afraid that the SA at Mazda might use chemical and ended up washing away PPS coating if havent bonded nicely with the car. Call me paranoid, i am really a noob in all these.

Secondly, i thought of driving and getting used to the car during the first 1k. In case there is any chip or dent, i can get Mazda to help me fix them during 1k servicing, right? Once i am used to driving then get PPS.
Bro, why cant vaccum?
There are quite a number of packages around. I still deciding but probably not going anything above $1k.

Those people will vacuum and wash without any care for the ride. Rather I go and Do it on my own during the weekends.

Oh ya... After PPS, i probably prefer to wash it on my own. Twenty cents nia....

Thanks bro,

My concern is that when should go PPS immediately after car collection. Then 1k servicing is pretty near. Afraid that the SA at Mazda might use chemical and ended up washing away PPS coating if havent bonded nicely with the car. Call me paranoid, i am really a noob in all these.

Secondly, i thought of driving and getting used to the car during the first 1k. In case there is any chip or dent, i can get Mazda to help me fix them during 1k servicing, right? Once i am used to driving then get PPS.

�

Strong PPS should resist chemicals and what not involved in washing and should adhere even with pressure washers. But I understand your feeling.

�

And you are right - if you get a ding before your 1K, you can get Mazda to help out with that before PPS.

But then some might say PPS might stop chips from happening in the first place [sweatdrop]

I think, you can go with your gut here, there is no right and wrong in this choice. But be aware that most groomers give a discount to fresh cars (~1 week from collection, maybe ~1 month) as those cars require less "preparation".

I am one who is very anal with my ride. I dun like it when people lean on my ride or rest their body weight on it with their palm on the roof edges. Also hate it when i give a person and ride and they auto adjust the interior to suit them.

Oh ya... After PPS, i probably prefer to wash it on my own. Twenty cents nia....

�

I am one who is very anal with my ride. I dun like it when people lean on my ride or rest their body weight on it with their palm on the roof edges. Also hate it when i give a person and ride and they auto adjust the interior to suit them.

I guess u r not alone... I join your league lol

Swee. I always know you are similar pattern one keke� [smash] � [drivingcar] � [wave] � [bounce1]

I guess u r not alone... I join your league lol

�

currently at groomer lab... trying to convince Randell to bring laser shade. look forward to a group buy.

Can see some of you next ride is the miataaaaaaa mx5!

Edited by Runforyourlife, 30 January 2016 - 10:12 AM.

Thanks bro,

My concern is that when should go PPS immediately after car collection. Then 1k servicing is pretty near. Afraid that the SA at Mazda might use chemical and ended up washing away PPS coating if havent bonded nicely with the car. Call me paranoid, i am really a noob in all these.

Secondly, i thought of driving and getting used to the car during the first 1k. In case there is any chip or dent, i can get Mazda to help me fix them during 1k servicing, right? Once i am used to driving then get PPS.
Bro, why cant vaccum?
There are quite a number of packages around. I still deciding but probably not going anything above $1k.

�

Yes paranoid is good. My friend did his PPS then the shop told him to park under shelter for 3 days. He was unable to find any plus he needed to drive to work. So the PPS kinda went down the drain..

Swee. I always know you are similar pattern one keke

Only a car freak could understand other car freaks haha.

Only a car freak could understand other car freaks haha.

You also one of us?

Strong PPS should resist chemicals and what not involved in washing and should adhere even with pressure washers. But I understand your feeling.

And you are right - if you get a ding before your 1K, you can get Mazda to help out with that before PPS.
But then some might say PPS might stop chips from happening in the first place
I think, you can go with your gut here, there is no right and wrong in this choice. But be aware that most groomers give a discount to fresh cars (~1 week from collection, maybe ~1 month) as those cars require less "preparation".

Thanks bro...

I will probably apply PPS after my 1K servicing then.

Yes paranoid is good. My friend did his PPS then the shop told him to park under shelter for 3 days. He was unable to find any plus he needed to drive to work. So the PPS kinda went down the drain..

Any idea what coating is he using?

currently at groomer lab... trying to convince Randell to bring laser shade. look forward to a group buy.

Laser shade, does it help to prevent heat when Park under the hot sun?

Just instruct them not to wash during the 1K servicing that's all. Can do PPS before.

Thanks bro...

I will probably apply PPS after my 1K servicing then.

Some PPS company uses heat lamp to cure the bonding.

853BBE10-3CAF-4451-81CB-D57B40AAB35D_zps

Yes paranoid is good. My friend did his PPS then the shop told him to park under shelter for 3 days. He was unable to find any plus he needed to drive to work. So the PPS kinda went down the drain..

I didn't make appt fix with JDM but they manage to squeeze one early slot for me.

Reach there before 10am get my mickey mouse horn changed!!!

�

Stock horn (Knight Horn) (CMI)

�

HELLA Red Twin Tone Horn!!!

�

Installing in progress

�

Chose Red to match Soul Red, now the horn is fierce & solid compare to stock

�

Grab some free sticker

�

How much is the horn change n labor bro?

Think I gonna make jdm e shop to fix all these stuff and opti shine for my car washing and pps needs. Lol

Thinking of redoing my useless solar film on the windscreen. Mine is RK given by SE. On a hot day, the heat just entered freely and I can feel it even while driving.

�

Saw someone posted about Infratint. Anyone changed, or others to recommend? Thanks.

Damage: $45 (horn + installation). FYI Concorde Auto is selling $34 but u have to get outside workshop to install for u with labor cost...

hope this helps...:)

How much is the horn change n labor bro?

Think I gonna make jdm e shop to fix all these stuff and opti shine for my car washing and pps needs. Lol

paging for dcb bro, he just change recently...:)

Thinking of redoing my useless solar film on the windscreen. Mine is RK given by SE. On a hot day, the heat just entered freely and I can feel it even while driving.

�

Saw someone posted about Infratint. Anyone changed, or others to recommend? Thanks.

�

Edited by Ken-sanki, 30 January 2016 - 02:18 PM.

Bro, i changed mine. I encourage you to change yours too. Got a shock of my life when Infratint guy tore away my existing film at my request to measure the IR rejection rate and its only 25%. Am using a 80%+ film now and driving under the hot sun is not a scorching hot as before.

Thinking of redoing my useless solar film on the windscreen. Mine is RK given by SE. On a hot day, the heat just entered freely and I can feel it even while driving.

�

Saw someone posted about Infratint. Anyone changed, or others to recommend? Thanks.

�

Go to Autotrend TPY better. They install with a relay at no additional cost.

How much is the horn change n labor bro?

Think I gonna make jdm e shop to fix all these stuff and opti shine for my car washing and pps needs. Lol

�

good lobang frm dcb bro must try!!!

Bro, i changed mine. I encourage you to change yours too. Got a shock of my life when Infratint guy tore away my existing film at my request to measure the IR rejection rate and its only 25%. Am using a 80%+ film now and driving under the hot sun is not a scorching hot as before.

�

Go to Autotrend TPY better. They install with a relay at no additional cost.

�

No lobang at all. Just sharing the lousy films from RK thats all.

�

good lobang frm dcb bro must try!!!

�

�80% is permitted by LTA or not? Haha...

�

How much is it? You changed for the entire car or also just the windscreen?

Bro, i changed mine. I encourage you to change yours too. Got a shock of my life when Infratint guy tore away my existing film at my request to measure the IR rejection rate and its only 25%. Am using a 80%+ film now and driving under the hot sun is not a scorching hot as before.

�

Go to Autotrend TPY better. They install with a relay at no additional cost.

�

:a-m1212:

�

No lobang at all. Just sharing the lousy films from RK thats all.

�

From LTA webbie:

�

b) The resultant light transmittance for the front windscreen and two front side windows must be at least 70%.
c) The resultant light transmittance for the rear windscreen and the rear passenger windows must be at least 25%.

�

depends on your risk appetite�� :XD:

�

Not sure if light directly equates to UV proportionately [sly]

Edited by Zcold, 30 January 2016 - 03:03 PM.

That would be LT (Light transmission), very different from the IR and UV heat rejection rate.� [laugh]

From LTA webbie:

�

b) The resultant light transmittance for the front windscreen and two front side windows must be at least 70%.
c) The resultant light transmittance for the rear windscreen and the rear passenger windows must be at least 25%.

�

depends on your risk appetite��

�

Not sure if light directly equates to UV proportionately

�

LTA never restrict on heat rejection rate. They only restrict on light transmission.

�

I paid $480 for the 2nd top tier package and another $50 for tearing away of the existing film on the ride.

I did for the whole car of course.

�80% is permitted by LTA or not? Haha...

�

How much is it? You changed for the entire car or also just the windscreen?

�

mycarforum

Thứ Hai, 28 tháng 11, 2016

2014 Mazda 3 part 86

Attached Thumbnails

Không có nhận xét nào:

Đăng nhận xét