Once the command is activated, the mzdconnect menu will show the door lock option and you can make changes
Edited by Fantastic_Duck, 05 January 2016 - 09:20 PM.
Hello, I have a question too. May I check if it is possible to "talk" to the car if u have the lcd installed by ad in ur standard mz3?
I tried saying "help" after I pressed the voice command button but no response. It seems to serve as a mute button now.
Bro with deluxe mz3, could u "talk" to the car? Or only via mzdconnect?
Many thanks in advance.
It may not understand "help"? Have you tried to ask it to call someone? I have only tried the "call" command. It worked for me by saying "call xxx". It then showed me the person/number that I intended to call on the screen to confirm before making the call. It only understands simple commands from what I know. Mine is a deluxe BTW.
Edited by HamtayoChan, 05 January 2016 - 09:22 PM.
Hi, where is this and how much you pay for car wash?
as dcd bro mention is tip only.
What exhaust is that? Tell me. Nao!
Bingo
Looks like tip only.
Quote From the car manual:
For cars with door lock button (not in Singapore)
How To: Auto lock/unlock function
WARNING (If you disable this option completely)
Do not pull the inner handle on a front door:
Pulling an inner handle on a front door while the vehicle is moving is dangerous. Passengers can fall out of the vehicle if a front door accidentally opens, which could result in death or serious injury.
Factory settings:
- When the vehicle speed exceeds 20 km/h (12 mph), all doors and the lift-gate lock automatically.
- When the ignition is switched off, all doors and the lift-gate unlock automatically.
These functions can also be disabled so that they do not operate.
NOTE:
Auto lock/unlock function setting change using door-lock switch
The doors and the lift-gate can set to lock or unlock automatically by selecting any one of the functions from the following list and using the driver's door-lock switch on the interior to perform the setting change as indicated in the procedure which follows.
Function Number and it's Function
1. The auto door-lock function is disabled.
2. All the doors and the lift-gate lock automatically when the vehicle speed is about 20 km/h (12 mph) or more.
3. All the doors and the lift-gate lock automatically when the vehicle speed is about 20 km/h (12 mph) or more. All the doors and the lift-gate unlock when the ignition is switched from ON to ACC or Off.
4. (Automatic trans-axle vehicles only)
When the ignition is switched ON and the shift lever is shifted from park (P) to any other gear position, all the doors and the lift-gate lock automatically.
5. (Automatic trans-axle vehicles only)
When the ignition is switched ON and the shift lever is shifted from park (P) to any other gear position, all the doors and the lift-gate lock automatically.
When the shift lever is shifted to park (P) while the ignition is switched ON, all the doors and the lift-gate unlock automatically.
------------------------------------------------------------------------------------------------
Programming details
1. Stop the vehicle and close all the doors.
2. Switch the ignition ON.
3. Press and hold the lock side of the driver's door-lock switch within 10 seconds of switching the ignition ON, and make sure a beep sound is heard about eight seconds afterwards.
4. Referring to the auto lock/unlock function setting list, determine the function number for the desired setting and press the unlock side of the driver's door-lock switch only in the amount of the selected function number (Ex. If you select function 2, press the unlock side of the switch only 2 times).
NOTE
There are only a total of five auto lock/unlock settings available for automatic trans-axle vehicles, and three for manual trans-axle vehicles. Be sure to press the unlock side of the driver's door-lock switch the correct number of times according to the selected function number. If the switch is mistakenly pressed six times on an automatic trans-axle vehicle or four times on a manual trans-axle, the procedure will be invalidated. If this occurs, start the procedure from the beginning.
5. Three seconds after the function setting has been changed, a beep sound will beep in the amount of the selected function number.
NOTE
- The doors cannot be locked or unlocked while the setting function is being performed.
- The procedure can be cancelled by pressing the lock side of the driver's door-lock switch.
�
Thanks for the extract. However, since we don't have�the door lock button nothing configurable except�the manual lock�of drive door� which inturn lock all doors.
Edited by praba, 05 January 2016 - 09:40 PM.
Bro after u do the pps, still can wash like that or at any of those petrol ones with soap right?B'Shine Grooming / 20 for washing.
as dcd bro mention is tip only.
Bingo
Better not go to petrol stations for a wash. Dun waste the coating.
Bro after u do the pps, still can wash like that or at any of those petrol ones with soap right?
�
Hi All,
i got two questions here:
�
1. A problem of my M3 is bothering me these days. It happened twice, both when i was going uphill (not too steep though), i press accelerator to try to maintain speed but then couldn't feel responses from engine, engine speed maintain low around 1k+ and i start losing speed. i am sure i have pressed the accelerator hard enough. Any ideas what's causing this?�
�
2. I went for 2nd service (5,000km) some time ago and thought would need to change engine oil, but then was told only need to change oil at 10,000km. Is it true?
�
Thanks!
�
I also�find accelerator response of Mazda is very poor and one have to press hard compared to my Altis before which I raised before in this forum. Not even on uphill even during highway lane transition�once you�slow down then �I feel I need to press hard to main the speed.
I would like to know also. It looks like a proper car washing. There are times when I am lazy to wash my car :p
Bro after u do the pps, still can wash like that or at any of those petrol ones with soap right?
�
I did my�paint/shine coat with Toughseal Yishun, one of the reason is that�I can go to them for manual wash with special foam and�Toughseal scratch�touch if any for�$10�each visit.��They do interior vacuum clean as well.
Edited by praba, 05 January 2016 - 09:52 PM.
Ok I'll take note of this one. Your wash got include vacuum?Better not go to petrol stations for a wash. Dun waste the coating.
I mean ahkn one..
Ahhhh Okok. Plan to get it done at opti shine den thereafter go for washing etc. so wondering e Normal petrol one issit cui. Usually wash and vacuum oneI did my paint/shine coat with Toughseal Yishun, one of the reason is that I can go to them for manual wash with special foam and Toughseal scratch touch if any for $10 each visit. They do interior vacuum clean as well.
Edited by Runforyourlife, 05 January 2016 - 10:00 PM.
I see. Thanks for sharing. Yes my end button works.Yes you cant "talk" and it serves as a mute button. Think your "end" call button should work. My "end" call button doesn't work due to software according to the installer. I installed my LCD outside though.
Ok. Will try it out tomorrow. Tks for sharing :)It may not understand "help"? Have you tried to ask it to call someone? I have only tried the "call" command. It worked for me by saying "call xxx". It then showed me the person/number that I intended to call on the screen to confirm before making the call. It only understands simple commands from what I know. Mine is a deluxe BTW.
Ok I'll take note of this one. Your wash got include vacuum?
I mean ahkn one..
Ahhhh Okok. Plan to get it done at opti shine den thereafter go for washing etc. so wondering e Normal petrol one issit cui. Usually wash and vacuum one
Hello, I have a question too. May I check if it is possible to "talk" to the car if u have the lcd installed by ad in ur standard mz3?
I tried saying "help" after I pressed the voice command button but no response. It seems to serve as a mute button now.
Bro with deluxe mz3, could u "talk" to the car? Or only via mzdconnect?
Many thanks in advance.
�For the deluxe model, you can "talk" to the car.�
The car recognizes a series of command. For a list of command, you need to say "help"�
�
Under the page interior feature Bluetooth (5-88)
�
You should be able to "talk" or give voice command...Hello, I have a question too. May I check if it is possible to "talk" to the car if u have the lcd installed by ad in ur standard mz3?
I tried saying "help" after I pressed the voice command button but no response. It seems to serve as a mute button now.
Bro with deluxe mz3, could u "talk" to the car? Or only via mzdconnect?
Many thanks in advance.
Check the "settings" in your LCD menu...and see if the voice button is not being overwritten by the lcd settings to be "mapped" to the mute function instead of factory voice command...
Edited by danzo, 05 January 2016 - 10:31 PM.
If I'm not wrong, it is because of the e-throttle.I also find accelerator response of Mazda is very poor and one have to press hard compared to my Altis before which I raised before in this forum. Not even on uphill even during highway lane transition once you slow down then I feel I need to press hard to main the speed.
You feel lack of response or lethargic when try to accelerate and also the skyactiv gb kick up quite fast in my opinion. Before you know it's already in 5th gear.
If you continue press harder on the accelerator it will just stay in the same gear, say the throttle opening is 10% at 6th gear as example, you want accelerate a bit more, the throttle opening is now say 15%, still in 6th gear though. It will take a little while to speed up.
Maybe you can try this trick (it works for me all the times...hehehe), ease the accelerator and step on it again... the gb will kick down and you will feel the acceleration...
I feel there is sth wrong with the gearbox. say in uphill situation when press hard, it's supposed to go to lower gear and increase engine speed, in my case as i said, engine at only 1k+ which is definitely not the speed it should be.. have to raise this up to M3 service ppl next time when i go for servicing.�
�
btw, have you done ur 2nd service? the 5,000 km one, did they change eng oil? Thx!
�
I don't think they change oil during 5k servicing. They only do some check-ups and top up the EO if necessary.
B'shine grooming at tradehub21
�
Ah... thanks.�
Quote From the car manual:
For cars with door lock button (not in Singapore)
How To: Auto lock/unlock function
WARNING (If you disable this option completely)
Do not pull the inner handle on a front door:
Pulling an inner handle on a front door while the vehicle is moving is dangerous. Passengers can fall out of the vehicle if a front door accidentally opens, which could result in death or serious injury.
Factory settings:
- When the vehicle speed exceeds 20 km/h (12 mph), all doors and the lift-gate lock automatically.
- When the ignition is switched off, all doors and the lift-gate unlock automatically.
These functions can also be disabled so that they do not operate.
NOTE:
Auto lock/unlock function setting change using door-lock switch
The doors and the lift-gate can set to lock or unlock automatically by selecting any one of the functions from the following list and using the driver's door-lock switch on the interior to perform the setting change as indicated in the procedure which follows.
Function Number and it's Function
1. The auto door-lock function is disabled.
2. All the doors and the lift-gate lock automatically when the vehicle speed is about 20 km/h (12 mph) or more.
3. All the doors and the lift-gate lock automatically when the vehicle speed is about 20 km/h (12 mph) or more. All the doors and the lift-gate unlock when the ignition is switched from ON to ACC or Off.
4. (Automatic trans-axle vehicles only)
When the ignition is switched ON and the shift lever is shifted from park (P) to any other gear position, all the doors and the lift-gate lock automatically.
5. (Automatic trans-axle vehicles only)
When the ignition is switched ON and the shift lever is shifted from park (P) to any other gear position, all the doors and the lift-gate lock automatically.
When the shift lever is shifted to park (P) while the ignition is switched ON, all the doors and the lift-gate unlock automatically.
------------------------------------------------------------------------------------------------
Programming details
1. Stop the vehicle and close all the doors.
2. Switch the ignition ON.
3. Press and hold the lock side of the driver's door-lock switch within 10 seconds of switching the ignition ON, and make sure a beep sound is heard about eight seconds afterwards.
4. Referring to the auto lock/unlock function setting list, determine the function number for the desired setting and press the unlock side of the driver's door-lock switch only in the amount of the selected function number (Ex. If you select function 2, press the unlock side of the switch only 2 times).
NOTE
There are only a total of five auto lock/unlock settings available for automatic trans-axle vehicles, and three for manual trans-axle vehicles. Be sure to press the unlock side of the driver's door-lock switch the correct number of times according to the selected function number. If the switch is mistakenly pressed six times on an automatic trans-axle vehicle or four times on a manual trans-axle, the procedure will be invalidated. If this occurs, start the procedure from the beginning.
5. Three seconds after the function setting has been changed, a beep sound will beep in the amount of the selected function number.
NOTE
- The doors cannot be locked or unlocked while the setting function is being performed.
- The procedure can be cancelled by pressing the lock side of the driver's door-lock switch.
Mazda 3 standard also can?
My Toys from TB are here! Finally came and got it all installed within 3 hours!! Happy like a young kid opening all his xmas presents..
�
Here comes the "Pro" installation..
�
Really sick of the boot light.. so dim that i can't even find my keys when i dropped it in the boot.. so die die must change!!
�
End Result... Damn Shiok!
�
Here comes the icing of the xmas log cake!
�
Comes with mirror finish.. No light is equally nice..
The effect of the scuff plate is wonderful!!
�
�
Loving it every moment i open the doors.. haha, super bengish
My Toys from TB are here! Finally came and got it all installed within 3 hours!! Happy like a young kid opening all his xmas presents..
�
�
�
what is this thing?? Speakerphone? Wireless charging pad? Alarm?
???
what is this thing?? Speakerphone? Wireless charging pad? Alarm?
???
�
Air purifier.. solar power.. gonna try out today!
BTW what's the temperature color of the LED?
I believe it's ard 5000k.
Your boot is so bright that some say he scored a perfect 45 for IB examination...Here comes the "Pro" installation..
Really sick of the boot light.. so dim that i can't even find my keys when i dropped it in the boot.. so die die must change!!
End Result... Damn Shiok!
Air purifier.. solar power.. gonna try out today!
Does it work as ionizer?
Review and update good or not.
mz3 just increase price by 2k ahead of the COE bidding, quite obvious COE will drop liao.
Waaaaa!! Sexy... On feather cushion lol!My Toys from TB are here! Finally came and got it all installed within 3 hours!! Happy like a young kid opening all his xmas presents..
Wow!!! Super bright.... Led? They tap to existing booth light?Your boot is so bright that some say he scored a perfect 45 for IB examination...
Super cool!!!!!!Here comes the icing of the xmas log cake!
Comes with mirror finish.. No light is equally nice..
The effect of the scuff plate is wonderful!!
Loving it every moment i open the doors.. haha, super bengish
Mazda 3 standard also can?
�
Definitely applies to both Standard and Deluxe�
30K Servicing
�
Hi! All, had done the 30K Servicing and thought you might be interested to know the costs. Total cost is $627.03 including GST. Below is the breakdown.
�
1. 30K Schedule Maintenance Svc (Mazda Oil). Rotate and Balance Front Tires
� � Cost: $145.35
�
2. R&R (Remove and Replace) Car & Remote Battery
� � Cost: $19
�
3. Sundry items
� � Cost: $5
�
4. Gasket
� � Cost: $1.02
�
5. Battery Remote Key
� � Cost: $5.87
�
6. I Stop Q85 Battery
� � Cost: $298
�
7. Engine Oil�
� � Cost: $98
�
The battery from the day I took delivery of the car till the 30K servicing is about 16 months old. The original cost of the new Q85 battery is $420, price listed above is after discount.�
�
Besides servicing, I had also feedback on the noise coming from the front suspension during wet weather when going over humps. Previously, they had rectified once when I feedback that the noise appear just going over humps. Can only verify on that during rainy days, so far no joy.
�
The Mazda Connect sometimes hang and reboot, I also highlighted this issue. According to the friendly service advisor, they will check and update the software. The version appeared in the car is 56.00.100 4A N. I forgot what was my previous version, can anyone advise if this is the current version?
�
Cheers!�
�
Bro, our rides do not have the individual lock and un-lock button to proceed.
Mazda 3 standard also can?
�
Haha i also have this bro.�
�
Haha i also have this bro.�
� �
Can share the link for boot and scuff plate light?Here comes the icing of the xmas log cake!
Comes with mirror finish.. No light is equally nice..
The effect of the scuff plate is wonderful!!
Loving it every moment i open the doors.. haha, super bengish
I have not done my 5000k service yet. Also that in my case my engine speed doesn't go below 2k in your situation except I feel hard pressing the pedal.I feel there is sth wrong with the gearbox. say in uphill situation when press hard, it's supposed to go to lower gear and increase engine speed, in my case as i said, engine at only 1k+ which is definitely not the speed it should be.. have to raise this up to M3 service ppl next time when i go for servicing.
btw, have you done ur 2nd service? the 5,000 km one, did they change eng oil? Thx!
Did you also get the black cover for the door hinges?
� �
�
Did you also get the black cover for the door hinges?
nope....
30K Servicing
�
Hi! All, had done the 30K Servicing and thought you might be interested to know the costs. Total cost is $627.03 including GST. Below is the breakdown.
�
1. 30K Schedule Maintenance Svc (Mazda Oil). Rotate and Balance Front Tires
� � Cost: $145.35
�
2. R&R (Remove and Replace) Car & Remote Battery
� � Cost: $19
�
3. Sundry items
� � Cost: $5
�
4. Gasket
� � Cost: $1.02
�
5. Battery Remote Key
� � Cost: $5.87
�
6. I Stop Q85 Battery
� � Cost: $298
�
7. Engine Oil�
� � Cost: $98
�
The battery from the day I took delivery of the car till the 30K servicing is about 16 months old. The original cost of the new Q85 battery is $420, price listed above is after discount.�
�
Besides servicing, I had also feedback on the noise coming from the front suspension during wet weather when going over humps. Previously, they had rectified once when I feedback that the noise appear just going over humps. Can only verify on that during rainy days, so far no joy.
�
The Mazda Connect sometimes hang and reboot, I also highlighted this issue. According to the friendly service advisor, they will check and update the software. The version appeared in the car is 56.00.100 4A N. I forgot what was my previous version, can anyone advise if this is the current version?
�
Cheers!�
�
Some questions:
�
1. Did they call you to ask whether you want them to change the remote key's battery? This should be a simple DIY job and the battery should be very cheap if bought from outside shops.
�
2. What are Sundry items?
�
3. How come car battery not even 2 years need to change already?
Good questions.�
Some questions:
�
1. Did they call you to ask whether you want them to change the remote key's battery? This should be a simple DIY job and the battery should be very cheap if bought from outside shops.
�
2. What are Sundry items?
�
3. How come car battery not even 2 years need to change already?
�
Some questions:
�
1. Did they call you to ask whether you want them to change the remote key's battery? This should be a simple DIY job and the battery should be very cheap if bought from outside shops.
�
2. What are Sundry items?
�
3. How come car battery not even 2 years need to change already?
�
1. Yes, they called to inform me that both batteries are weak and need to change. I was lazy to DIY so ask them to proceed with changing out the remote key's battery.�
�
2. I didn't ask what are the Sundry items.
�
3. I am also quite surprised when they called and told me need to change the car battery. Like you, I was expecting it to last around 2 years. But they did the battery test and said the readout is weak. Not wanting to risk a dead battery when trying to start the engine next time, I told them to proceed with the change.�
�
The other thing about battery is that I am not sure if there are alternative supply sources to it. Didn't go around asking and searching.
The battery should last way longer than 16mths lei....30K Servicing
Hi! All, had done the 30K Servicing and thought you might be interested to know the costs. Total cost is $627.03 including GST. Below is the breakdown.
1. 30K Schedule Maintenance Svc (Mazda Oil). Rotate and Balance Front Tires
Cost: $145.35
2. R&R (Remove and Replace) Car & Remote Battery
Cost: $19
3. Sundry items
Cost: $5
4. Gasket
Cost: $1.02
5. Battery Remote Key
Cost: $5.87
6. I Stop Q85 Battery
Cost: $298
7. Engine Oil
Cost: $98
The battery from the day I took delivery of the car till the 30K servicing is about 16 months old. The original cost of the new Q85 battery is $420, price listed above is after discount.
Besides servicing, I had also feedback on the noise coming from the front suspension during wet weather when going over humps. Previously, they had rectified once when I feedback that the noise appear just going over humps. Can only verify on that during rainy days, so far no joy.
The Mazda Connect sometimes hang and reboot, I also highlighted this issue. According to the friendly service advisor, they will check and update the software. The version appeared in the car is 56.00.100 4A N. I forgot what was my previous version, can anyone advise if this is the current version?
Cheers!
What have you done to ur batt?
Mine on the way kekekekeke....Haha i also have this bro.
Steady bro!
Mine on the way kekekekeke....
�
The battery should last way longer than 16mths lei....
What have you done to ur batt?
�
Nothing, I didn't do anything to my battery. Not even maintenance or topping up of battery water (if applicable).�
Nothing, I didn't do anything to my battery. Not even maintenance or topping up of battery water (if applicable).�
I seriously thought the days of topping up of battery water have gone. I used to have to do that with my parents' car, the old Volvo 240. Built like a tank.
�
Anyway I finally changed my car horn at Autotrend. Finally because they are always so busy but today managed to find a slot. 40 dollars for Stebel. Finally can be more fierce with my horn!
�
Also, someone there was asking so I eavesdropped. He wanted to do something like.... 1) drive off doors lock, and 2) stop car doors unlock. They said they can do 1) doors close, engine start, tap brake... doors lock, then 2) engine off, doors unlock. Sounds ok, but, with our i-STOP thing, I think the doors will unlock everytime we're at a traffic light. I'm sure there are other combis. Just need ot check with them. SGD 80 btw.
It will be ok as our engine is not entirely off when i-stop kicks in.
�
By the way bumper need to remove to change the horns? Fuse got change?
�Sounds ok, but, with our i-STOP thing, I think the doors will unlock everytime we're at a traffic light. I'm sure there are other combis. Just need ot check with them. SGD 80 btw.
�
Edited by dcb, 06 January 2016 - 12:45 PM.
mz3 just increase price by 2k ahead of the COE bidding, quite obvious COE will drop liao.
Woah, my friend just ordered hers on Monday. Managed to bargain down to 99,888. Worth it!!
Is this the LOUDEST? yet legal horn? hahhah the stock horn..... lets not go to tt disappointing discussion.
�
I seriously thought the days of topping up of battery water have gone. I used to have to do that with my parents' car, the old Volvo 240. Built like a tank.
�
Anyway I finally changed my car horn at Autotrend. Finally because they are always so busy but today managed to find a slot. 40 dollars for Stebel. Finally can be more fierce with my horn!
�
Also, someone there was asking so I eavesdropped. He wanted to do something like.... 1) drive off doors lock, and 2) stop car doors unlock. They said they can do 1) doors close, engine start, tap brake... doors lock, then 2) engine off, doors unlock. Sounds ok, but, with our i-STOP thing, I think the doors will unlock everytime we're at a traffic light. I'm sure there are other combis. Just need ot check with them. SGD 80 btw.
�
I seriously thought the days of topping up of battery water have gone. I used to have to do that with my parents' car, the old Volvo 240. Built like a tank.
Anyway I finally changed my car horn at Autotrend. Finally because they are always so busy but today managed to find a slot. 40 dollars for Stebel. Finally can be more fierce with my horn!
Also, someone there was asking so I eavesdropped. He wanted to do something like.... 1) drive off doors lock, and 2) stop car doors unlock. They said they can do 1) doors close, engine start, tap brake... doors lock, then 2) engine off, doors unlock. Sounds ok, but, with our i-STOP thing, I think the doors will unlock everytime we're at a traffic light. I'm sure there are other combis. Just need ot check with them. SGD 80 btw.
Ya.... The old days of topping up batt. Water lol!
Glad u changed the "mickey mouse" horn. Oh feel so embarassing today (and everytime) when sounded the horn. Hahahah.... As pic shown.
Btw, the replacement horn needs relay?
Nice! got the same scuff plate, but they only had "Axela" and not "Mazda 3" at that point of time... do you have them on passenger seats?? they din have this option either....
Here comes the icing of the xmas log cake!
�
Comes with mirror finish.. No light is equally nice..
The effect of the scuff plate is wonderful!!
�
�
Loving it every moment i open the doors.. haha, super bengish
�
My previous ride is glass...
Plastic meaning will turn foggy ??
Wah...relative to 20k servicing, 30k servicing is even more ex. Does that mean 40k servicing will be even more ex?30K Servicing
Hi! All, had done the 30K Servicing and thought you might be interested to know the costs. Total cost is $627.03 including GST. Below is the breakdown.
1. 30K Schedule Maintenance Svc (Mazda Oil). Rotate and Balance Front Tires
Cost: $145.35
2. R&R (Remove and Replace) Car & Remote Battery
Cost: $19
3. Sundry items
Cost: $5
4. Gasket
Cost: $1.02
5. Battery Remote Key
Cost: $5.87
6. I Stop Q85 Battery
Cost: $298
7. Engine Oil
Cost: $98
The battery from the day I took delivery of the car till the 30K servicing is about 16 months old. The original cost of the new Q85 battery is $420, price listed above is after discount.
Besides servicing, I had also feedback on the noise coming from the front suspension during wet weather when going over humps. Previously, they had rectified once when I feedback that the noise appear just going over humps. Can only verify on that during rainy days, so far no joy.
The Mazda Connect sometimes hang and reboot, I also highlighted this issue. According to the friendly service advisor, they will check and update the software. The version appeared in the car is 56.00.100 4A N. I forgot what was my previous version, can anyone advise if this is the current version?
Cheers!
Do you have car cam that taps battery after you parked your ride?Nothing, I didn't do anything to my battery. Not even maintenance or topping up of battery water (if applicable).
Yeap plastic, a little bird told me to give it a little shelter to prevent it from getting sunburn and turn yellow....
�
so I gave it an "umbrella" eyelids ($80), hopefully it works, or I'll shoot tt little birdy...
Erm, bros....Is our headlight cover plastic?
My previous ride is glass...
Plastic meaning will turn foggy ??
�
Edited by ShawnO, 06 January 2016 - 01:18 PM.
Wah...relative to 20k servicing, 30k servicing is even more ex. Does that mean 40k servicing will be even more ex?
06 January 2016 - 03:58 PMFantastic_DuckYes, bro dcb is right ... However there are different modes (refer to manual)Bro, our rides do not have the individual lock and un-lock button to proceed.
The cars are programmed to auto lock above 20 kmph for those who have activated the auto lock in the mzdconnect.
06 January 2016 - 04:04 PMKen-sankiI tried, I cant locate the auto lock. need mod?
Yes, bro dcb is right ... However there are different modes (refer to manual)
The cars are programmed to auto lock above 20 kmph for those who have activated the auto lock in the mzdconnect.�
06 January 2016 - 04:08 PMdcbOur rides can't do.
I tried, I cant locate the auto lock. need mod?
�
06 January 2016 - 04:26 PMovermarsDo we need to make appt with�Autotrend? keep to install�it? does JDM install horn?
Better to. Autotrend is usually quite busy cos they do a lot of installation for new cars by Parallel Importers. So, call them first. If they say busy then don't waste time going down.
COE dropped!!!!
�
45k for Cat A! So, my friend who bought at SGD 99,888.... got 4k rebate because of the COE.
�
Standard sedan for SGD 96k. Value....
06 January 2016 - 04:27 PMdcbWah Cat A dropped $10K?
Better to. Autotrend is usually quite busy cos they do a lot of installation for new cars by Parallel Importers. So, call them first. If they say busy then don't waste time going down.
COE dropped!!!!
�
45k for Cat A! So, my friend who bought at SGD 99,888.... got 4k rebate because of the COE.
�
Standard sedan for SGD 96k. Value....
�
06 January 2016 - 04:43 PMdcbSince our car battery is expensive, anyone considered Nanopulser? We can try a group buy if we have ample interested parties.
�
http://www.mycarforu...-7#entry5688562
Edited by dcb, 06 January 2016 - 04:46 PM.
06 January 2016 - 04:51 PMHamtayoChanWow... $45002 for Cat A COE. That's a mad drop.Better to. Autotrend is usually quite busy cos they do a lot of installation for new cars by Parallel Importers. So, call them first. If they say busy then don't waste time going down.
COE dropped!!!!
45k for Cat A! So, my friend who bought at SGD 99,888.... got 4k rebate because of the COE.
Standard sedan for SGD 96k. Value....
06 January 2016 - 05:02 PMEddHooiBetter to. Autotrend is usually quite busy cos they do a lot of installation for new cars by Parallel Importers. So, call them first. If they say busy then don't waste time going down.
COE dropped!!!!
45k for Cat A! So, my friend who bought at SGD 99,888.... got 4k rebate because of the COE.
Standard sedan for SGD 96k. Value....
I bought my standard sedan at 98k... And my coe was 56k.
Go ask for more discount! Hope your fren can bargain down to 88k!
06 January 2016 - 05:03 PMEddHooiWow... $45002 for Cat A COE. That's a mad drop.
Good for new car owners now. If got old car to trade in, no value now :(
06 January 2016 - 05:10 PMRunforyourlifeI bought my standard sedan at 98k... And my coe was 56k.
Go ask for more discount! Hope your fren can bargain down to 88k!�
Can i check what overall freebies did you managed to get for your standard 98k sedan back then bro?
�
06 January 2016 - 05:10 PMovermarsI bought my standard sedan at 98k... And my coe was 56k.
Go ask for more discount! Hope your fren can bargain down to 88k!�
LOL just told her that. Once signed on the dotted line, damn hard to budge anything.
�
I tell you what happened to mine. I went to the showroom at Leng Kee. Actually was 50-50 on getting a new car to replace my Jazz. Anyhoo, was shown different numbers for the Deluxe Sedan. Wife and I decided we didn't want to take 60k loan for 5 years, so the SE said ok, then can't get the 2k discount, which we were ok with cos we save more not paying the interest.
�
After that, went on test drive, think like crazy. Finally settled with HB. So, after that crunched numbers. Came up with the final number. Said ok, finalized.
�
Next day, called me, said she made a mistake in the final number. Forgot to add in 2k because I wasn't taking the loan.
�
Long story short, paid 2k more. No compensation or anything. I hear bros here get stuff like petrol vouchers, SGD 1,888 discount, etc etc. for stuff like late delivery. Mine nothing at all! Had to go on with it. I know, I could have said, ok Cancel. But then, confirmed all the prints will come out saying I agreed to the sales, they reserve the right to make amendments, I agreed trade-in for my car and if pull out will be penalized etc etc.
�
So, some people asked me who my SE is. I'll just stay neutral. Won't condemn cos I got my car on time, no problems. Won't recommend also cos there are other better ones too (that I have read of).
�
Summary: Once sign on dotted line, you're beholden to them.
06 January 2016 - 05:17 PMEddHooi30K Servicing
Hi! All, had done the 30K Servicing and thought you might be interested to know the costs. Total cost is $627.03 including GST. Below is the breakdown.
1. 30K Schedule Maintenance Svc (Mazda Oil). Rotate and Balance Front Tires
Cost: $145.35
2. R&R (Remove and Replace) Car & Remote Battery
Cost: $19
3. Sundry items
Cost: $5
4. Gasket
Cost: $1.02
5. Battery Remote Key
Cost: $5.87
6. I Stop Q85 Battery
Cost: $298
7. Engine Oil
Cost: $98
The battery from the day I took delivery of the car till the 30K servicing is about 16 months old. The original cost of the new Q85 battery is $420, price listed above is after discount.
Besides servicing, I had also feedback on the noise coming from the front suspension during wet weather when going over humps. Previously, they had rectified once when I feedback that the noise appear just going over humps. Can only verify on that during rainy days, so far no joy.
The Mazda Connect sometimes hang and reboot, I also highlighted this issue. According to the friendly service advisor, they will check and update the software. The version appeared in the car is 56.00.100 4A N. I forgot what was my previous version, can anyone advise if this is the current version?
Cheers!
Fyi, standard 30k servicing is $258 replaceable parts will be engine oil and filter. Tires rotation will be included.
06 January 2016 - 05:21 PMEddHooiCan i check what overall freebies did you managed to get for your standard 98k sedan back then bro?
Since mine is standard, i got
1, 8" LCD with GPS
2, Reverse camera.
3, Front camera.
4, Tinting (i think most of us have this).
5, $1,888 discount (retail price was 99,888... And that's why i got my standard sedan at $98k flat).
06 January 2016 - 05:27 PMKen-sanki 06 January 2016 - 05:36 PMRunforyourlifeSince mine is standard, i got
1, 8" LCD with GPS
2, Reverse camera.
3, Front camera.
4, Tinting (i think most of us have this).
5, $1,888 discount (retail price was 99,888... And that's why i got my standard sedan at $98k flat).�
Thanks bro. No solar film huh or no need one? haha.
�
06 January 2016 - 05:41 PMdcbDamn shiok when i read customers get like cash discounts.
Since mine is standard, i got
1, 8" LCD with GPS
2, Reverse camera.
3, Front camera.
4, Tinting (i think most of us have this).
5, $1,888 discount (retail price was 99,888... And that's why i got my standard sedan at $98k flat).�
Tinting aka solar film
Thanks bro. No solar film huh or no need one? haha.
��
For a moment i thought is Axela525's ride
�
06 January 2016 - 05:42 PMEddHooiThanks bro. No solar film huh or no need one? haha.
Bro... The tinting is the solar film by RikeCool. I believe all buyers have.
06 January 2016 - 05:44 PMEddHooiDamn shiok when i read customers get like cash discounts.
Maybe i got trade in old car that's y they can give better deal for me.
Anyway good trade in price for me. Else i also won't consider to change car.
06 January 2016 - 05:48 PMRunforyourlifeMaybe i got trade in old car that's y they can give better deal for me.
Anyway good trade in price for me. Else i also won't consider to change car.�
Feel happy too when i see ppl getting discounts on top of listed price.
�
me also have but is red plate one and gonna scrap soon :S
06 January 2016 - 05:49 PMHamtayoChan 06 January 2016 - 07:19 PMEddHooiYes, bro dcb is right ... However there are different modes (refer to manual)
The cars are programmed to auto lock above 20 kmph for those who have activated the auto lock in the mzdconnect.�
Bro, if standard version can do these type of settings let me know... TIA�
06 January 2016 - 09:26 PMdcb 06 January 2016 - 10:45 PMKaneTeoEddHooi,what do u mean if trade in old car no value?Good for new car owners now. If got old car to trade in, no value now :(
06 January 2016 - 10:53 PMEricChan 07 January 2016 - 01:22 AMAxela525 07 January 2016 - 01:26 AMahboyyAnyone using the free Blaupunkt in car camera? Had it for 9 months and now always appearing 'memory error'. Changed to a good new memory card but after few weeks come back again. Where to go for repairs?�
�
Also, the paint on the car is very thin :( People open door hit my door handle, got deep mark. Bird shyt can react to the paint if not clean immediately.�
07 January 2016 - 04:42 AMEddHooiIf coe starts to drop, buyers will choose to buy new cars over used cars. So old cars will loose its value just like 10 years ago, where even a 5 yrs old used car only have scrap or export value. During that time, used car dealers change their business model to sell PI cars instead. There's simply no market for used cars!EddHooi,what do u mean if trade in old car no value?
The logic is simple... With 9k coe drop now (which is around 20%), ask yourself, u will walk in to a new car or used car showroom? Used car dealers buying in used cars will also be more careful and will take in used cars at a lower value.
07 January 2016 - 04:47 AMEddHooiAnyone using the free Blaupunkt in car camera? Had it for 9 months and now always appearing 'memory error'. Changed to a good new memory card but after few weeks come back again. Where to go for repairs?
Also, the paint on the car is very thin :( People open door hit my door handle, got deep mark. Bird shyt can react to the paint if not clean immediately.
I'm using BP front cam foc from Mazda. So far so good. Is yours from them? If yes should be still under warranty. Check with Mazda.
Yes gotta agree the paint is thin. Less than 3 mths old already got 1 or 2 chips :(
Anyway, some bros did paint protection. Dunno can really protect or not.
07 January 2016 - 07:07 AMKaneTeoIf base on dec old car trade in is 30k now they take in 26k and no over trade?If coe starts to drop, buyers will choose to buy new cars over used cars. So old cars will loose its value just like 10 years ago, where even a 5 yrs old used car only have scrap or export value. During that time, used car dealers change their business model to sell PI cars instead. There's simply no market for used cars!
The logic is simple... With 9k coe drop now (which is around 20%), ask yourself, u will walk in to a new car or used car showroom? Used car dealers buying in used cars will also be more careful and will take in used cars at a lower value.
07 January 2016 - 07:09 AM7nineYes gotta agree the paint is thin. Less than 3 mths old already got 1 or 2 chips :(
Anyway, some bros did paint protection. Dunno can really protect or not.
Yes, paint is thin. Little chips can see the grey mental already. Paint protection can't help much. Easy cleaning, yes.
07 January 2016 - 07:16 AMEddHooiI always have these questions but yet haven't try it out.
With the engine started, what happens when:
1, U get out of car with the key in your pocket (for example changing pass and u r at least 10m away). Will it auto stop the engine after some time?
2, Inside the car, but somehow it doesn't detect your key (for example key in pocket or key battery is weak). Will it auto stop engine when u r driving? Or iStop cannot restart the car again?
Without engine started:
3, u accidentally unlock car unknowlingly when walking away. Will the car auto lock itself after some time?
4, anyone tried modding the existing "alarm" system such that when u lock or unlock car will have some sound?
5, Since press button start, if key battery die how?... Doesn't make sense to jump start in this case.
07 January 2016 - 07:17 AMdcbAm also using the blaupunkt 2.0 from AD. So far ok.
The paint is indeed thin, witness on a friend's Mz3.Anyone using the free Blaupunkt in car camera? Had it for 9 months and now always appearing 'memory error'. Changed to a good new memory card but after few weeks come back again. Where to go for repairs?
Also, the paint on the car is very thin :( People open door hit my door handle, got deep mark. Bird shyt can react to the paint if not clean immediately.
07 January 2016 - 07:21 AMEddHooiIf base on dec old car trade in is 30k now they take in 26k and no over trade?
Something like that. If they play safe, they may even go lower just in case COE drops further. Don't forget they are businessman as well. They wouldn't want to risk to buy in at high price and can't let go 2 months later.
If they anticipate it will drop further, they may not even want to take it due to overstock of used cars to sell away.
07 January 2016 - 08:26 AMKen-sankiMine oso have small chip caused by the stone on my bonnet
I'm using BP front cam foc from Mazda. So far so good. Is yours from them? If yes should be still under warranty. Check with Mazda.
Yes gotta agree the paint is thin. Less than 3 mths old already got 1 or 2 chips :(
Anyway, some bros did paint protection. Dunno can really protect or not.�
any way to prevent little chip? drive 50km/h? don't follow behind trucks?
Yes, paint is thin. Little chips can see the grey mental already. Paint protection can't help much. Easy cleaning, yes.
�
07 January 2016 - 08:35 AMShawnOI always have these questions but yet haven't try it out.
With the engine started, what happens when:
1, U get out of car with the key in your pocket (for example changing pass and u r at least 10m away). Will it auto stop the engine after some time?
2, Inside the car, but somehow it doesn't detect your key (for example key in pocket or key battery is weak). Will it auto stop engine when u r driving? Or iStop cannot restart the car again?
Without engine started:
3, u accidentally unlock car unknowlingly when walking away. Will the car auto lock itself after some time?
4, anyone tried modding the existing "alarm" system such that when u lock or unlock car will have some sound?
5, Since press button start, if key battery die how?... Doesn't make sense to jump start in this case.�
1. Tried for 10mins, engine doesn't shut dwn
2. Tried for 15mins, with the key gone for >10mins, car still drivable for about 5min, I den parked the car w/o shutting dwn the engine, still kept running until key came back. But car did scream no keys found! (key in wife clutch bag, left me in the car to park and wait and went off to buy stuff). iStop din kick in.
3. Yes and no. YES (If you accidentally unlock w/o opening any doors) NO (If you accidentally unlock and followed by opening any doors and closing it with your key already out of range)
4. Base line system already have. when you lock and unlock, it'll "beep" not give an alarm to inform driver (not sure if youre refering to this)
5. According to SE, even if batt of the key goes flat (unable to unlock the door), the transceiver in the key only require very little pwr and would still be able to communicate with the car to start the engine. (Yet to verify).
�
wah, macham I'm replying email. hahahah
07 January 2016 - 09:21 AM7nineany way to prevent little chip? drive 50km/h? don't follow behind trucks?
I have accept chip is part and parcel of driving. Only showroom car got no chip.�
07 January 2016 - 09:24 AMEddHooi1. Tried for 10mins, engine doesn't shut dwn
2. Tried for 15mins, with the key gone for >10mins, car still drivable for about 5min, I den parked the car w/o shutting dwn the engine, still kept running until key came back. But car did scream no keys found! (key in wife clutch bag, left me in the car to park and wait and went off to buy stuff). iStop din kick in.
3. Yes and no. YES (If you accidentally unlock w/o opening any doors) NO (If you accidentally unlock and followed by opening any doors and closing it with your key already out of range)
4. Base line system already have. when you lock and unlock, it'll "beep" not give an alarm to inform driver (not sure if youre refering to this)
5. According to SE, even if batt of the key goes flat (unable to unlock the door), the transceiver in the key only require very little pwr and would still be able to communicate with the car to start the engine. (Yet to verify).
wah, macham I'm replying email. hahahah
Haha.. Tks bro. I also like writing email and love to do it in point format.
Btw point 4, yours have "beep" sound?Mine oso have small chip caused by the stone on my bonnet
any way to prevent little chip? drive 50km/h? don't follow behind trucks?
Mine caused by people opening their doors. No matter how conscious u try to park perfectly centre and to ensure enough space for other drivers, there will still be some a**holes that intentionally swing their doors hard...
07 January 2016 - 09:53 AMdcbThats why i only look for single lots or park at the left side, hoping the car on my right do not have a passenger.
Mine caused by people opening their doors. No matter how conscious u try to park perfectly centre and to ensure enough space for other drivers, there will still be some a**holes that intentionally swing their doors hard...
�
Well said. Part and parcel of driving.
I have accept chip is part and parcel of driving. Only showroom car got no chip.�
�
07 January 2016 - 10:07 AMHuge 07 January 2016 - 10:12 AMWeewee1976Haha issit? He just got his Honda Jazz ah? SKZ number plate siah. Looks nice also, especially his Hello Kitty sticker LOL
�
It's actually his wife's car. The number plate is bidded one.
Không có nhận xét nào:
Đăng nhận xét