mycarforum: 2014 Mazda 3 part 109

TB... cheap good and no drilling..

most importantly, it add 2bhp :)P

waiting end like long long..

i order from one of the stockist. need 3 months waiting time.

you can update on your own. when you collected your car? i collected early march my also no latest.

I thought of tb too. But not sure if their left hand drive covers will fit right hand drive. Plus they are just slip on covers I think

I believe it will be different. Bought before for my previous ride. The holes location are different.

I thought of tb too. But not sure if their left hand drive covers will fit right hand drive. Plus they are just slip on covers I think

�

Haha mine is Mz2 and there also very quiet so came over here and kpo. Mine also have sports mode.

�

I see.. so how is your rpm like when sport mode is on ? always high rpm ?

Not always high but when you step on the accelerator then car is more responsive. Basically it feels like a build in throttle controller.

I see.. so how is your rpm like when sport mode is on ? always high rpm ?

�

Which place are you looking at? Post the postal code here and I check for you.

Mazda Nav system is not the best. Some new roads are not inside, some new buildings too. I also posted before that they got my place wrong (nav system send me to my neighbour's place). But all is not too bad because in the end, I still can get to the places I want.

If a place is not found in the nav system, then find a nearby address. Not expecting the nav/map to be perfect so still ok for me.

Are you serious about putting the baby seat in the middle?? I hope you are trolling as I was advised not to do that because:

1) How to secure the seat
2) In a really freak event that the baby is not secured and met with a head on accident, the baby can fly out through the windscreen

Having said this, this morning I saw a Honda car with a baby seat in front (between driver and passenger) and facing front. It is extremely dangerous!

Not trolling as the middle seat belt is also the diagonal shoulder type. It is very firm.

Normally when driving off from traffic light, u all will ram until how many rpm then let go?

cHjvGRt.png?1

�

my 1000KM mark! can start to drive faster a little bit. lol�

Normally when driving off from traffic light, u all will ram until how many rpm then let go?

3k rpm for me.

�

my 1000KM mark! can start to drive faster a little bit. lol�

�

hmm.. I drove normally during my 1st 1000km.. not very aggressive (ie, high rev, hard brake, etc...) �but frequently reach 90 / 100 kmh on highway.. did I do wrong? lol

I believe it will be different. Bought before for my previous ride. The holes location are different.

No issue for my. Just slip in, no drilling required.

hmm.. I drove normally during my 1st 1000km.. not very aggressive (ie, high rev, hard brake, etc...) �but frequently reach 90 / 100 kmh on highway.. did I do wrong? lol

�

Nothing to worry. Just drive normal. Your car have been pre-run in before they reset the odometer and ship the vehicle.�

Any one install �front and rear camera for his new car? by tapping to fusebox without cutting the wire is it consider warranty void?

I bought the deluxe and im worried the rear airbag will hit my baby. So i placed my baby seat in the middle. Not sure if 8m doing it right. Most ppl put at driver side of rear.
This recommendation is crazily dangerous

�

My car seat always faced the front in the front passenger seat when my kids were little. I drove a Honda City then. The seat was secure enough. It also depends on the quality of the seat itself. I used a maxi-cosi full body seat - the restraints were secure.
�

Anyone managed to mod the auto lock door when the car is moving? Lazy to lock and unlock the door all time.

COE increase by 3k, Mazda 3 price increase by 7k.

Mazda business too good?

3k rpm for me.

Woah i usually ram till around 2k rpm cos im afraid it will spoil the engine or am i wrong?

Woah i usually ram till around 2k rpm cos im afraid it will spoil the engine or am i wrong?

To each their own leh.. If u let someone light footed maybe 1k to 1.5k they also can wait.. Let takumi drive maybe 3k to 4k

Woah i usually ram till around 2k rpm cos im afraid it will spoil the engine or am i wrong?

If you are talking about run-in, then 2k rpm sounds about right. Our car throttle response is a bit lagging in first and second gear. The car feels sluggish around 2k rpm in the first two gears. I feel there's not enough air being combusted. That's my opinion.

No issue for my. Just slip in, no drilling required.

Bro, can share with the rest of us potentially Mazda3 owners?

Anyone managed to mod the auto lock door when the car is moving? Lazy to lock and unlock the door all time.

Add on alarm will have the auto lock and unlock.

Did my in Sggarage, not easy to install in MZ3 took them around 4 hours, maybe first time cant find the wire to tap on.

The price is on their website.

TB... cheap good and no drilling..

�

most importantly, it add 2bhp :)P

waiting end like long long..

�

i order from one of the stockist. need 3 months waiting time.

�

�

you can update on your own. when you collected your car? i collected early march my also no latest.

Bro, when did you order the bonnet insulation? Can share the price and stockist contact? Thanks.

No la cannot drill one la. I mean the one i bought from Tabao, the holes for the clips on the insulator is not in the same position as the one under my bonnet. Now i am buying from mazda Thailand, it should be the same.

�

You buy from local stockist sure fits to a T. How much you paid for with the clips? Wanna compare with me buying from Mazda Thailand.
�

No issue for my. Just slip in, no drilling required.

�

No la cannot drill one la. I mean the one i bought from Tabao, the holes for the clips on the insulator is not in the same position as the one under my bonnet. Now i am buying from mazda Thailand, it should be the same.

You buy from local stockist sure fits to a T. How much you paid for with the clips? Wanna compare with me buying from Mazda Thailand.

Oh.. I mean pedal not bonnet insulator.. I order from the stock list from Rangoon road. The one share by dome buddy here. Still not here yet..

Add on alarm will have the auto lock and unlock.
Did my in Sggarage, not easy to install in MZ3 took them around 4 hours, maybe first time cant find the wire to tap on.
The price is on their website.

Bro, when did you order the bonnet insulation? Can share the price and stockist contact? Thanks.

They are located at Rangoon road. There is a list share by fellow buddy here.

Oh pedals. Yeah some china ones are all clips on.�

�

Thought you bought bonnet insulator. Share how your pedals look like leh. I am using the Mazda sports pedals.

Oh.. I mean pedal not bonnet insulator.. I order from the stock list from Rangoon road. The one share by dome buddy here. Still not here yet..
They are located at Rangoon road. There is a list share by fellow buddy here.

�

Oh pedals. Yeah some china ones are all clips on.

Thought you bought bonnet insulator. Share how your pedals look like leh. I am using the Mazda sports pedals.

http://i.ebayimg.com...59n/s-l300.jpgy

Exactly like this

Nice. Mine looks like this.

By the way your extension have a Y.

http://i.ebayimg.com...u59n/s-l300.jpg

Exactly like this

�

Attached Thumbnails

Nice. Mine looks like this.

By the way your extension have a Y.

�

This is very nice! dcb sir, you got this from TEK?

This is very nice! dcb sir, you got this from TEK?

�

tek very niao one only give 2 piece

Mazda Thailand.

This is very nice! dcb sir, you got this from TEK?

�

Mazda Thailand.

Ah! So cool! Is it a full replacement or slip on type

Only brakes are slip on, foot rest and accelerator are drilled. .

Ah! So cool! Is it a full replacement or slip on type

�

my 1000KM mark! can start to drive faster a little bit. lol

Time to enjoy!!!

Guys can recommend a place for car wash?

Look for John la bro.

Guys can recommend a place for car wash?

Time to enjoy!!!

�yeah man .. like what mazda say can zoom zoom! like the rev sound. haha.�

Hais. car seat kanna some glue or what liquid. cant remove with water. anyone has any idea to get rid of this?

�

Many thanks in advance!

�

Hais. car seat kanna some glue or what liquid. cant remove with water. anyone has any idea to get rid of this?

�

Many thanks in advance!

�

�

waa...wat is that? I dirty mind sorry....

Edited by Axela525, 13 April 2016 - 12:52 AM.

Hais. car seat kanna some glue or what liquid. cant remove with water. anyone has any idea to get rid of this?

Many thanks in advance!

Brand new car? When I collect my car. There some stains too. I guess it's from the mech who install the Sola firm. Try using a leather cleaner see if helps

Anyone did pps on their car alr? How's it like after 1 year of application?

Look for John la bro.

�

they do car wash also? how much? $10?

Hais. car seat kanna some glue or what liquid. cant remove with water. anyone has any idea to get rid of this?

�

Many thanks in advance!

�

�

�

mai gek gek la bro, we know whats that

�

haha not what you think lah , new car leh, i think kanna some glue while doing accessories.

$15

they do car wash also? how much? $10?

�

�

haha not what you think lah , new car leh, i think kanna some glue while doing accessories.

�

new car all the more must do....

$15

�

thanks bro!

Look for John la bro.

�

who/where is John bro? looking for some good car wash too.. i'm staying in the east.

�

btw, you all wash the car yourselves or ? I normally wash at Esso..

John is the boss of Opti-Shine�where Runforyourlife and myself did our PPS with.

�

I usually DIY wash every sat. Unless rain or busy then will drive over to OS to wash. However they only wash for their customer's car.

who/where is John bro? looking for some good car wash too.. i'm staying in the east.

�

btw, you all wash the car yourselves or ? I normally wash at Esso..

�

Edited by dcb, 13 April 2016 - 10:01 AM.

who/where is John bro? looking for some good car wash too.. i'm staying in the east.

�

btw, you all wash the car yourselves or ? I normally wash at Esso..

�

Ya i also normally wash at esso but think do PPS liao seldom get them to wash LOL

Ya i also normally wash at esso but think do PPS liao seldom get them to wash LOL

�

"seldom get them to wash".. because you scare they damage the PPS ?

�

I also plan to wash myself after the PPS... �just don't know how long I can continue.. my old ride I wash myself for 1st month.. after that all the way Esso.. LOL

�

btw, i just use Turtle rinse free to wash.. no shampoo.. LOL.. what shampoo you guys use ?

�

also, anyone entrust your PPS to our bangladesh friend to wash your car at MSCP? :)

"seldom get them to wash".. because you scare they damage the PPS ?

�

I also plan to wash myself after the PPS... �just don't know how long I can continue.. my old ride I wash myself for 1st month.. after that all the way Esso.. LOL

�

btw, i just use Turtle rinse free to wash.. no shampoo.. LOL.. what shampoo you guys use ?

�

also, anyone entrust your PPS to our bangladesh friend to wash your car at MSCP? :)

�

old car no problem, even ask my dog wash also can.

�

but new car will think twice.

I use optimum shampoo. Never use those car shampoo with wax.

�

All along have been washing my ride every weekend. Never trust those petrol station wash or even worse, MSCP bangla.�
Those will create swirl marks or worse, scratches.

"seldom get them to wash".. because you scare they damage the PPS ?

�

I also plan to wash myself after the PPS... �just don't know how long I can continue.. my old ride I wash myself for 1st month.. after that all the way Esso.. LOL

�

btw, i just use Turtle rinse free to wash.. no shampoo.. LOL.. what shampoo you guys use ?

�

also, anyone entrust your PPS to our bangladesh friend to wash your car at MSCP? :)

�

Hais. car seat kanna some glue or what liquid. cant remove with water. anyone has any idea to get rid of this?

Many thanks in advance!

Period discharge stain?

Period discharge stain?

haha ~~

haha ~~

Din wipe too hard. Cannot remove means cannot remove. Too hard and you end up with 2 colours. Wanna me rub for you?

Period discharge stain?

�

[bounce2] � �

Din wipe too hard. Cannot remove means cannot remove. Too hard and you end up with 2 colours. Wanna me rub for you?

�haha rub for me sia.. car seat already 2 color. enough. haha [drivingcar]

wow alot of rubbing, pee stain, period discharge stain and xiao discussion here in mazda 3 thread.

I wash at MSCP for 40 cents worth of water. Rinse and wipe dry only - make sure use microfiber cloth and no sand bits.

�

but so far only wash once in like months [:p]

Hello everyone,�

�

Recently saw a few M3 with bodykit zooming around and looking real good

�

Also noticed the rear boot lip spoiler looking suave

�

Where to install tt lip apart from JDM and AD ?� :wub: � TIA

I wash at MSCP for 40 cents worth of water. Rinse and wipe dry only - make sure use microfiber cloth and no sand bits.

�

�

but so far only wash once in like months

�

Same! i wash every 10 days or so because moving around so much. Only use the one stroke method swiping a microfiber cloth vertically from bonnet to boot.

�

Just don't get TEK to wash your car. My car was so terribly scratched that it looks like a van gogh "starry night" under artificial lighting

(have since complained and in the midst of resolving)

I wash at MSCP for 40 cents worth of water. Rinse and wipe dry only - make sure use microfiber cloth and no sand bits.

�

�

but so far only wash once in like months

�

microfiber cloth u all mass buy from where? use liao black liao throw right?

microfiber cloth u all mass buy from where? use liao black liao throw right?

�

for me, black liao i throw away. if not spend lots of time n water to clean it but up to individual and if got leftover black black, might stain the car and u keep wiping away this black stain.

Edited by kohzcm, 13 April 2016 - 03:28 PM.

for me, black liao i throw away. if not spend lots of time n water to clean it but up to individual and if got leftover black black, might stain the car and u keep wiping away this black stain.

�

share lobang for the cloth lei. saw in petrol station lol.

Hello everyone,�

�

Recently saw a few M3 with bodykit zooming around and looking real good

�

Also noticed the rear boot lip spoiler looking suave

�

Where to install tt lip apart from JDM and AD ?� � TIA

�

Same! i wash every 10 days or so because moving around so much. Only use the one stroke method swiping a microfiber cloth vertically from bonnet to boot.

�

Just don't get TEK to wash your car. My car was so terribly scratched that it looks like a van gogh "starry night" under artificial lighting

(have since complained and in the midst of resolving)r

Rear boot lip can get from TB and self DIY. Bodykit I think JDM is ok. If not, go jb its cheaper....

Rear boot lip can get from TB and self DIY. Bodykit I think JDM is ok. If not, go jb its cheaper....

�

oh yeah , Thanks bro!

I just buy the micro-fibre cloth from Giant at $3.5 if I recall correctly.

�

Normally when I rinse, just use hand and swipe - like molesting the car [laugh]

�

The cloth is for wiping dry, but I wipe lightly.

�

Disclaimer: I'm not very particular about shine cleanliness, just�minimal effort and cost� :XD: � with good enough results

Edited by Zcold, 13 April 2016 - 04:42 PM.

share lobang for the cloth lei. saw in petrol station lol.

Must be like pro. Must use clay to remove all dirt... Haha

sad. my new car is going workshop after kanna bang by taxi. today just fixed wider side mirror by JDM. kns

sad. my new car is going workshop after kanna bang by taxi. today just fixed wider side mirror by JDM. kns

Claim his insurance?

sad. my new car is going workshop after kanna bang by taxi. today just fixed wider side mirror by JDM. kns

�

if u confirm his fault claim his insurance, kill his finances, let his car sit in workshop 2 weeks.

I just buy the micro-fibre cloth from Giant at $3.5 if I recall correctly.

�

Normally when I rinse, just use hand and swipe - like molesting the car

�

�

The cloth is for wiping dry, but I wipe lightly.

�

Disclaimer: I'm not very particular about shine cleanliness, just�minimal effort and cost� � with good enough results

�

tok kong. use hand molest, then use cloth to wipe dry. kns why sound so obscene...

Must be like pro. Must use clay to remove all dirt... Haha

�

hahahahaha.

Good morning Peeps,

�

Anyone using Hurricane drop-in filter? Where to get?

Oh.. I mean pedal not bonnet insulator.. I order from the stock list from Rangoon road. The one share by dome buddy here. Still not here yet..
They are located at Rangoon road. There is a list share by fellow buddy here.

�

Bro,

I bought the bonnet insulator from Fong Tat yesterday, they still have 4 pcs left but the clips only left with 2 packets.

If you keen, call their Race Course Road office.

if u confirm his fault claim his insurance, kill his finances, let his car sit in workshop 2 weeks.

�

his car looked ok. only mine.. �now he saying mazda expensive! ask me go other workshop. but let me talk to him first later see how

his car looked ok. only mine.. now he saying mazda expensive! ask me go other workshop. but let me talk to him first later see how

Ouch.. Personally I'll prefer to go TEK. After all it is a new car!

Spare parts alone will take a while for outside workshop

tok kong. use hand molest, then use cloth to wipe dry. kns why sound so obscene...

Hahaha half expected that

pros & cons.. go TEK for sure waiting for months for the car to be repaired based on people's recent feedbacks... some said in FB he waited for 4 months !?!

go outside workshop at most leave the car overnight, 1 day can collect. I assume this is not so major repair, at most respray or change whole bumper ? it's not that it will void your warranty for changing the bumper... unless engine/electrical repair then no choice must go TEK..

How much? Include clips?

Bro,

I bought the bonnet insulator from Fong Tat yesterday, they still have 4 pcs left but the clips only left with 2 packets.

If you keen, call their Race Course Road office.

�

Wow is Hurricane still in the market???� [confused]

Good morning Peeps,

�

Anyone using Hurricane drop-in filter? Where to get?

�

pros & cons.. go TEK for sure waiting for months for the car to be repaired based on people's recent feedbacks... some said in FB he waited for 4 months !?!

go outside workshop at most leave the car overnight, 1 day can collect. I assume this is not so major repair, at most respray or change whole bumper ? it's not that it will void your warranty for changing the bumper... unless engine/electrical repair then no choice must go TEK..

�

in the end settled at TEK. earliest is End may or early june. then have to drive with this damage for 2 months!! sadded. �need change whole bumper and reinforce tow hook also. the tow hoook cover also gone. they say if do outside will void warranty for that. Terrible.

�

Now I claim against him, NCD wun be affected right?

in the end settled at TEK. earliest is End may or early june. then have to drive with this damage for 2 months!! sadded. need change whole bumper and reinforce tow hook also. the tow hoook cover also gone. they say if do outside will void warranty for that. Terrible.

Now I claim against him, NCD wun be affected right?

Depends on his version of the story to insurance company

How much? Include clips?

�

Wow is Hurricane still in the market???�

SGD 80.25

in the end settled at TEK. earliest is End may or early june. then have to drive with this damage for 2 months!! sadded. �need change whole bumper and reinforce tow hook also. the tow hoook cover also gone. they say if do outside will void warranty for that. Terrible.

�

Now I claim against him, NCD wun be affected right?

�

i thought as long as we claim (regardless whose fault), NCD next year will be affected? wrong ?

Thats cheap!

SGD 80.25

�

Thats cheap!

�

Just got it from Fong Yat (dunno why the name is different - this is the one at race course road. Fong Tat is at serangoon near city square mall - they are listed together). The clips they gave me are hyundai/kia clips but they say the fit is the same - hopefully it's true. The uncle is quite friendly actually - maybe cos it's a quiet day. They take cash only btw and the nearest atm is at city square mall (5 mins walk - not including going downstairs to the atm - so i drove - haha)
�

[thumbsup] Clips are universal.

Just got it from Fong Yat (dunno why the name is different - this is the one at race course road. Fong Tat is at serangoon near city square mall - they are listed together). The clips they gave me are hyundai/kia clips but they say the fit is the same - hopefully it's true. The uncle is quite friendly actually - maybe cos it's a quiet day. They take cash only btw and the nearest atm is at city square mall (5 mins walk - not including going downstairs to the atm - so i drove - haha)
�

�

Edited by dcb, 14 April 2016 - 05:37 PM.

i thought as long as we claim (regardless whose fault), NCD next year will be affected? wrong ?

�

If you claim the other party's insurance, then your NCD won't be affected, coz you are not at fault for the collision.

in the end settled at TEK. earliest is End may or early june. then have to drive with this damage for 2 months!! sadded. �need change whole bumper and reinforce tow hook also. the tow hoook cover also gone. they say if do outside will void warranty for that. Terrible.

�

Now I claim against him, NCD wun be affected right?

�

How come repair at TEK also need 1 or 2 months? Outside workshop i understand, cos need to order parts, but TEK itself should be faster, no?

Sigh i have been asked to top up again.�

�

now is 3k for 6 bid guaranteed. i started with 9 bids, it has been 3 bids since.

�

So hard to get a car....to top up or not to top.�

�

Think i might have to try bargaining to topping up 2k. Doesnt seem like COE will drop, esp with car show round the corner?�

Sigh i have been asked to top up again.�

�

now is 3k for 6 bid guaranteed. i started with 9 bids, it has been 3 bids since.

�

So hard to get a car....to top up or not to top.�

�

Think i might have to try bargaining to topping up 2k. Doesnt seem like COE will drop, esp with car show round the corner?�

�

You have quite a few bids more to go right? Why not wait abit. I figured they would want to fulfill your order since it will still translate to business.�

Hi all , any thing to take note when installing ICE (eg. component speakers, 2 amps and a sub-woofer)??? Voltage stabilizer needed?? [bounce2]

My friend is still waiting for his bumper change at TEK. The delay is the liaising with the opposition's insurance company. Initially i thought it is quite good that TEK will repair and claim for you unlike other ADs.

How come repair at TEK also need 1 or 2 months? Outside workshop i understand, cos need to order parts, but TEK itself should be faster, no?

�

Capacitor yes, VS NO.

Hi all , any thing to take note when installing ICE (eg. component speakers, 2 amps and a sub-woofer)??? Voltage stabilizer needed??

�

Only brakes are slip on, foot rest and accelerator are drilled. .

�

You bought from Mazda Thailand, brought back and got Mazda Singapore to install them for you?

Sigh i have been asked to top up again.

now is 3k for 6 bid guaranteed. i started with 9 bids, it has been 3 bids since.

So hard to get a car....to top up or not to top.

Think i might have to try bargaining to topping up 2k. Doesnt seem like COE will drop, esp with car show round the corner?

Are u in a hurry? If yes, ask for 1 guaranteed bid instead.

his car looked ok. only mine.. now he saying mazda expensive! ask me go other workshop. but let me talk to him first later see how

Go other workshop then. Ask him to pay for the warranty as well.

You bought from Mazda Thailand, brought back and got Mazda Singapore to install them for you?

Nope. Can DIY as it came with templates and instruction manual.

My friend is still waiting for his bumper change at TEK. The delay is the liaising with the opposition's insurance company. Initially i thought it is quite good that TEK will repair and claim for you unlike other ADs.

Capacitor yes, VS NO.

We have capacitor in our car right???

We have capacitor in our car right???

Not for your ICE

Not for your ICE

Thanks Bro for your info :)

If you claim the other party's insurance, then your NCD won't be affected, coz you are not at fault for the collision.

�

thanks!

in the end settled at TEK. earliest is End may or early june. then have to drive with this damage for 2 months!! sadded. �need change whole bumper and reinforce tow hook also. the tow hoook cover also gone. they say if do outside will void warranty for that. Terrible.

�

Now I claim against him, NCD wun be affected right?

�

For a rear end collision, your NCD definitely won't be affected unless the other party can prove that it was your fault which is very unlikely.

first thing collected yesterday, installing android auto� [:p]

�

Just got it from Fong Yat (dunno why the name is different - this is the one at race course road. Fong Tat is at serangoon near city square mall - they are listed together). The clips they gave me are hyundai/kia clips but they say the fit is the same - hopefully it's true. The uncle is quite friendly actually - maybe cos it's a quiet day. They take cash only btw and the nearest atm is at city square mall (5 mins walk - not including going downstairs to the atm - so i drove - haha)
�

Yes,�the name is Fong Yat, I dont know the difference as I google for Fong Tat and it shows the 2 addresses.

I also got the Hyundai clips, they fits, no problem but it is quite expensive for clips, each pcs is $1.50, 10 pcs is $15!!

Should have taken some clips out from my old car and reuse them.

first thing collected yesterday, installing android auto�

�

20160415_090954-1.jpeg

Cool. I read that the reverse cam doesn't work anymore after installation. Has it been upgraded?

first thing collected yesterday, installing android auto�

�

20160415_090954-1.jpeg

�

wow.. this surely void warranty, no ?

Bro,
I bought the bonnet insulator from Fong Tat yesterday, they still have 4 pcs left but the clips only left with 2 packets.
If you keen, call their Race Course Road office.

Thanks pal, will drop by tomorrow.

Bro,
I bought the bonnet insulator from Fong Tat yesterday, they still have 4 pcs left but the clips only left with 2 packets.
If you keen, call their Race Course Road office.

wow.. this surely void warranty, no ?

Yep. As far as electrical stuff is concerned, warrant totally void

I wouldn't recommend to any bro that don't like to tinker around electronics (custom roms, rooting phone, running command in ssh etc).

�

Its sits as an application in MZD Connect, with the possibility to be uninstalled before going back service centre. When android auto app exits, it goes back to mzd connect just like fuel economy.

�

Some pluses

1) Google map (search, zoom in out, traffic)

2) Native spotify functionality

3) Whatsapp appears and read to you.

�

minuses

1) App will exit if you pick up a call in android auto

2) reverse camera blacks out in the app. But functional within mzd connect

�

if you not sure what you doing, please refrain from installing it because it will void your warranty.

�

Yep. As far as electrical stuff is concerned, warrant totally void

�

Attached Thumbnails

Edited by JackyLee, 15 April 2016 - 03:47 PM.

Thank pal, installed

Attached Thumbnails

Bro,

I bought the bonnet insulator from Fong Tat yesterday, they still have 4 pcs left but the clips only left with 2 packets.

If you keen, call their Race Course Road office.

�

Hi Bro, MZ3 reluxe akan datang by end of this month.�

But I quiet surprise MZ3 bonnet didn't come with insulator.�

May I know how much you paid for your bonnet insulator. Thank you.

S$80+

Hi Bro, MZ3 reluxe akan datang by end of this month.�

But I quiet surprise MZ3 bonnet didn't come with insulator.�

May I know how much you paid for your bonnet insulator. Thank you.

�

Nope. Can DIY as it came with templates and instruction manual.

Wah u drill it yourself. Thumbs up to you!

S$80+

75 excluding Gst if that sound cheaper.. Haha..

Now engine quieter

Easy peasy with a power drill. Don't try it with a screwdriver.� :a-bang:

Wah u drill it yourself. Thumbs up to you!

�

Very cheap. No need spend hundreds on soundproofing.� [thumbsup]

75 excluding Gst if that sound cheaper.. Haha..

Now engine quieter

�

Anyone collecting ur ride Tml morning?
What are the other freebies tt we can ask for, other than those that we have when we signed.
Eg , umbrella, window shield, tyre tool?

Nothing you can get liao. Maybe a road tax holder decal ba.

Anyone collecting ur ride Tml morning?
What are the other freebies tt we can ask for, other than those that we have when we signed.
Eg , umbrella, window shield, tyre tool?

�

Nothing you can get liao. Maybe a road tax holder decal ba.

:(
Need to go to continental car show to collect freebies

Whats there to collect? [confused]

:(
Need to go to continental car show to collect freebies

�

Whats there to collect?

Dunno. But I went for audi's Black Friday's showroom, they gave sun shades and free ice creams.

Wah shiok.

Dunno. But I went for audi's Black Friday's showroom, they gave sun shades and free ice creams.

Hi bros�

�

new to the community, alr ordered mazda 3 std but thinking of upgrading to deluxe. actually dont even know if the SE can do that haha :X�

�

can i ask what is the point of mazda connect? any reason to upgrade to deluxe just for the mzdconnect? or can just live with the retro fit 8inch screen on standard?�

�

i usually use phone's google maps for navi. will only need the car for audio / music most likely�

�

is the car HID light worth it also? chio?�

�

Hi bros�

�

new to the community, alr ordered mazda 3 std but thinking of upgrading to deluxe. actually dont even know if the SE can do that haha :X�

�

can i ask what is the point of mazda connect? any reason to upgrade to deluxe just for the mzdconnect? or can just live with the retro fit 8inch screen on standard?�

�

i usually use phone's google maps for navi. will only need the car for audio / music most likely�

�

is the car HID light worth it also? chio?�

�

Doubt you can change your order.

�

The difference between deluxe and std is much more then equipment, you are making a decision based on your lifestyle IMHO.

�

Would you either want to start cheap and mod until satisfactory, or start beautiful (or stop here)�and make it more beautiful.

�

This being said, if you enjoy music, the deluxe has more speakers�

And for safety the deluxe has more airbags

For ease of user, The deluxe has more reverse sensor

For night driving, HID will be better than standard halogen

�

thou i have a standard and i feel that M3 is no way short of standard equipment that comes with it.�

Performance wise i believe they are identical.

�

Cheers for making the right choice! see you on the road soon!� [bounce2] �

Doubt you can change your order.

�

The difference between deluxe and std is much more then equipment, you are making a decision based on your lifestyle IMHO.

�

Would you either want to start cheap and mod until satisfactory, or start beautiful (or stop here)�and make it more beautiful.

�

This being said, if you enjoy music, the deluxe has more speakers�

And for safety the deluxe has more airbags

For ease of user, The deluxe has more reverse sensor

For night driving, HID will be better than standard halogen

�

thou i have a standard and i feel that M3 is no way short of standard equipment that comes with it.�

Performance wise i believe they are identical.

�

Cheers for making the right choice! see you on the road soon!� �

�

Performance is the same (same engine, suspension etc). The gadgets are what differentiate the two. The HID white lights are also auto adjusting in height. With the MZD, you have the iDrive-type rotary controls that give you a very driver-friendly position to make selections on the infotainment system. It also integrates with the reversing camera. LED rear lights also make it that much cooler.

�

Enjoy your ride! You've just bought one of the best looking practical cars on our roads today. Cheers!
�

Since we only have 3 buttons for devices (istop, afs and tcs). Does anyone know if we can get blank buttons for the other 3 locations on the dash? (working buttons that we can hook up to devices - fog lamps, drl etc)

�

This is the cx 5 version - couldn't find the mazda 3 pic on the web.

�

2012-Mazda-CX-5-AWD-SUV-front-buttons.jp

Edited by Insaneblu, 16 April 2016 - 07:24 AM.

Thanks bros for your detailed explanations!!�

�

So if the standard version has no MZDconnect, how does the commander knob work? Can you control the infotainment system similarly?�

�

S$80+

�

So far how many hole need drill from the bonnet.

Thank you for your sharing

Just booked?wish me good luck!

No drilling required la.

So far how many hole need drill from the bonnet.

Thank you for your sharing

�

mycarforum

Thứ Ba, 29 tháng 11, 2016

2014 Mazda 3 part 109

Attached Thumbnails

Attached Thumbnails

Attached Thumbnails

Không có nhận xét nào:

Đăng nhận xét