An engineer called Lukasz has created an app, the build date is 22 oct 2015.
You can control movies from your phone using his app. I am Apple user but I might consider an android if it's useful.
Disclaimer: use at your own risk.... I am not affiliated in anyway. Just sharing. If you like it, like my post pls...
Below is the introduction of his project from his site. Click on the link below.
-------------
about watching movies in your Mazda car? Yes, now it is possible with Mazda Media Player! No modification to car infrastructure (and IVI system), no additional devices required � just one Android app and WiFi connection!
�Mazda Connect� is new Mazda�s infotainment system which has been added to almost all latest (> 2014) models: Mazda 2, Mazda 3, Mazda 6, Mazda CX-3 and Mazda CX-5. Thanks to powerful hardware (i.MX6 ARM) and well-designed GUI, Mazda�s Engineers have managed to make one of the most intuitive and easy-to-use IVI system on the market. Unfortunately, this system is not as good as really could be! Do you want to watch movies directly from usb stick on main TFT screen? Do you want to watch TV in your car? Do you want to set/read/monitor some additional values not available through standard interface? Just download and support development of Mazda Media Player!
References:
http://www.lukasz-sk...da-media-player
Bro Fantistic_Duck, according to my SE, they don't get their commission until car has been delivered. So i am sure your SE will call you soon.
Thanks for the info. Good to know
Change to 17 inch 50 series 215mm best! offset 45 7.5J
Got it! Thanks!
Can match red car?
Attached Thumbnails
My Mazda 3 tire can't pump up to 250 kpa. anyone can advise?
�
always go error tryingto pump up to 250kpa and have the loud hissing sound.�
My Mazda 3 tire can't pump up to 250 kpa. anyone can advise?
�
always go error tryingto pump up to 250kpa and have the loud hissing sound.�
Pump when tires are cold.....I pump 35psi
My Mazda 3 tire can't pump up to 250 kpa. anyone can advise?
�
always go error tryingto pump up to 250kpa and have the loud hissing sound.�
�
Try a different kiosk, maybe faulty pump. I pump mine 265 kpa, no problem.
From 15 Aug wait till now. I deserve an award for patience
I just sms my SE he says my car confirmed not coming in this batch but in nov batch... Sobs,..
From 15 Aug wait till now. I deserve an award for patience
Mazda 3 also need to wait for 3 months?!
I just sms my SE he says my car confirmed not coming in this batch but in nov batch... Sobs,..
From 15 Aug wait till now. I deserve an award for patience
I also waited 3 mths because the colour i wanted no stock.
Can match red car?
I have seen a pic of red M3 with bronze wheels (slightly darker than the OZ that you show) in the US and they look great on the car. Search for CarbonSmoke mazda 3 on google.
ok...thks..I have seen a pic of red M3 with bronze wheels (slightly darker than the OZ that you show) in the US and they look great on the car. Search for CarbonSmoke mazda 3 on google.
Can match red car?
I think it will look nice if you wrap your chrome parts in gold too. Looks like ironman
Attached Thumbnails
Edited by Fantastic_Duck, 28 October 2015 - 08:45 PM.
ok...thks..
Found it for you. The car is on 19 inch wheels. Can't really tell it's bronze because it's a bit dark. It just looks sick.
Attached Thumbnails
Edited by HamtayoChan, 28 October 2015 - 08:53 PM.
Bro, not trying to rain on your parade but the Deluxe will have this, not the standard. If it's standard ver and you install DRL, it's against LTA regulation (to install DRL). Install at your risk. If you have not bought your car consider the deluxe.
http://www.lta.gov.s...ur-vehicle.html
http://www.onemotori...fy-notallow.pdf
Quote from LTA:
Daytime Running Lamp (DRL)
Vehicles should only be installed with factory-fitted Daytime Running Lamps (DRLs) as the vehicle manufacturer would have designed the lamps to meet internationally recognised vehicle standards.
For aftermarket DRL kits retrofitted onto existing vehicles, there are concerns that such lamps have the propensity to cause unwanted glare and distraction to other motorists on the roads. Therefore, the installation of aftermarket DRL kits is not allowed.
�
the original Mazda daytime running lamps are integrated into the bi-xenon headlamps, they are a fibreoptic 'signature' that surrounds the projector.
�
some people prefer flashier bumper-mounted kits for whatever reason...
Edited by 7hm, 28 October 2015 - 09:01 PM.
First in car cam so also blur haha
Can match red car?
�
er, a bit loud lei ...
Check with bros who got the blaupunkt cam, do u guys keep the camera perpetually plugged in to the cable? Or do u guys remove and plug in only when low battery?
First in car cam so also blur haha
How long does the battery last without plug in?
I just sms my SE he says my car confirmed not coming in this batch but in nov batch... Sobs,..
From 15 Aug wait till now. I deserve an award for patience
Wow, I thought yours will be this batch. your patience will definitely pay off.
er, a bit loud lei ...
A red car is attractive to owners of a certain profile type. A red car screams "Hey! Over here! I am here! Look at me!" While waving her arms in the air frantically. If it's not loud enough then she will stand on a chair and use a loud hailer, one arm still frantically moving in large conspicuous motion. Does she understand the meaning of keep quiet and sit down in class? Probably not. Her Teachers always had a lot to say about her....
A red car is attractive to owners of a certain profile type. A red car screams "Hey! Over here! I am here! Look at me!" While waving her arms in the air frantically. If it's not loud enough then she will stand on a chair and use a loud hailer, one arm still frantically moving in large conspicuous motion. Does she understand the meaning of keep quiet and sit down in class? Probably not. Her Teachers always had a lot to say about her....
�
yeah, red car is Ok to me ... but gold rims a bit loud right ?
yeah, red car is Ok to me ... but gold rims a bit loud right ?
Gold rims is the loud hailer.... If I share mine I scared you will fall off your chair
Edited by Fantastic_Duck, 28 October 2015 - 11:58 PM.
The gold OZ rims nice....but the shop say must deposite 1k then he order....I know him for 15 yrs...disappointed, won't buy!
Check with bros who got the blaupunkt cam, do u guys keep the camera perpetually plugged in to the cable? Or do u guys remove and plug in only when low battery?
First in car cam so also blur haha
Just leave it plugged in.
The gold OZ rims nice....but the shop say must deposite 1k then he order....I know him for 15 yrs...disappointed, won't buy!
How much do they cost?
The gold OZ rims nice....but the shop say must deposite 1k then he order....I know him for 15 yrs...disappointed, won't buy!
Cos if you change your mind, he will be at a lose lose situation.. Come on lah.
How much do they cost?
Top up 1.8k 17" 6.8kg...lightweight...trade in my wheels to him
I also waited 3 mths because the colour i wanted no stock.
�
What colour did you booked?
What colour did you booked?
Titanium Flash. I booked in July, and i only got my car last week.
If during that time i am willing to go for other colours, i would have got it in Aug as i have a car to trade in.
From LTA website and last night's news:
�
"TRANSPORT AUTHORITY WILL INCREASE PENALTIES ON ILLEGALLY SOUPED UP CARS
Illegal modifications are commonly detected during periodic and ad-hoc vehicle inspections. In addition, LTA enforcement officers conduct regular checks and acts on feedback it receives from members of the public on suspected illegally modified vehicles. Action is also taken against workshops found to be facilitating illegal modifications.
We are reviewing the penalty framework to enhance its deterrence effect. Currently, vehicle owners who illegally modify their vehicles face a fine of up to $1,000 or a jail term of up to three months, for the first offence. Repeat offenders will face a fine of up to $2,000 or a jail term of up to six months. Owners of workshops that facilitate such modifications can be fined up to $2,000, or face a jail term of up to three months, for the first offence; and a fine of up to $5,000, or a jail term of up to six months for repeat offences.
Members of the public who encounter such illegal modifications are encouraged to report the matter to LTA at 1800 CALL LTA (1800-225 5582), with details of vehicle registration number to facilitate investigations."
�
�
Does this apply to Malaysian cars on our roads too?
�
Edited by Insaneblu, 29 October 2015 - 08:57 AM.
Try a different kiosk, maybe faulty pump. I pump mine 265 kpa, no problem.
�
May I know what is the standard tire pressure for front &�rear with two people on the ride??
I just sms my SE he says my car confirmed not coming in this batch but in nov batch... Sobs,..
From 15 Aug wait till now. I deserve an award for patience
�
heard frm my SC, nxt shpt wil Eta on 10 Nov
I also waited 3 mths because the colour i wanted no stock.
�
what color u have asked?? Soul red??
Cos if you change your mind, he will be at a lose lose situation.. Come on lah.
Yes bro Ivan is right. I also put deposit of $3k for my rims.
Yes bro Ivan is right. I also put deposit of $3k for my rims.
Today went there and discuss abt rims with him....then he said toyo tyres must order, then say my tyres clock 700km no more new must pay extra $150...he grumble why I take so long to decide then my OZ rims no stock, grumble why i compare so long...menses man! So I got piss off and drove off, dun change rims from him anymore! KNN!
what color u have asked?? Soul red??
I asked for Titanium Flash in July. And waited till Oct last week.
![[thumbsup]](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_thgyD6svvSb8YxnWJbzAaEWhoAwAHoS82U--0uoakNyNrsWpgCXP7SxAuZElOrQtd0MktlUfWd2YjarNlBeaXNuAcvx-qmtzqZu_-ed5cn9I83_azz4o1PwmUVHWteNEwmM0Lljpmg=s0-d)
�
Today went there and discuss abt rims with him....then he said toyo tyres must order, then say my tyres clock 700km no more new must pay extra $150...he grumble why I take so long to decide then my OZ rims no stock, grumble why i compare so long...menses man! So I got piss off and drove off, dun change rims from him anymore! KNN!
�
May I know what is the standard tire pressure for front &�rear with two people on the ride??
�
�
250 to 280 kpa (full load). So, I pump mid point, since I always have about 3 people in car.�
Today went there and discuss abt rims with him....then he said toyo tyres must order, then say my tyres clock 700km no more new must pay extra $150...he grumble why I take so long to decide then my OZ rims no stock, grumble why i compare so long...menses man! So I got piss off and drove off, dun change rims from him anymore! KNN!
Lol... that shop is really one kind. There are still many shops that sell OZ wheels in Singapore. He just lose a customer.
I asked for Titanium Flash in July. And waited till Oct last week.
�
Ic. I asked for Soul red with ex-stock and coming in on 10 Nov shpt.
SC give me his confidence that next week I sure get my coe (opt for 6 n-g�bids)�
Gold rims is the loud hailer.... If I share mine I scared you will fall off your chair
Do share, I'm for loud but hubby cannot take it lol
Today went there and discuss abt rims with him....then he said toyo tyres must order, then say my tyres clock 700km no more new must pay extra $150...he grumble why I take so long to decide then my OZ rims no stock, grumble why i compare so long...menses man! So I got piss off and drove off, dun change rims from him anymore! KNN!
You spend money with him and still gotta take his PMS? Good choice not to continue with him! So which rims did you finally settle on? Show pix
I asked for Titanium Flash in July. And waited till Oct last week.
You should also be awarded for being patient, thumbs up!
Do share, I'm for loud but hubby cannot take it lol
You spend money with him and still gotta take his PMS? Good choice not to continue with him! So which rims did you finally settle on? Show pix
No change yet...u wanna change rims together? ha ha....u got good rims shop pm me....this sat off so maybe drive around and see.....sian.....
![[:p]](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_uAlBV-kca9Zg71L_9h3kZZQ4_GYJXezI484M8l1LNHR1qB62zNQx5wbkJ_HCDSuaVQxrxBsNkZPl0y-gkHGusLvP-Np9hOnAHOAcWzF96vkmlUQf7EPglXGwpUBnX-wty1TDhlLZc=s0-d)
No change yet...u wanna change rims together? ha ha....u got good rims shop pm me....this sat off so maybe drive around and see.....sian.....
Oic, I thought you've changed liao. You should change with bro Fantastic_Duck, get better price together? Very unlikely I'll change rims although hubby did comment on some rims that look nice. So we haven't been rim shopping. I only want to see what others do heh heh
Oic, I thought you've changed liao. You should change with bro Fantastic_Duck, get better price together? Very unlikely I'll change rims although hubby did comment on some rims that look nice. So we haven't been rim shopping. I only want to see what others do heh heh
I went to fantastic duck shop very high class and looks expensive....that guy knowledge is good though.....
I went to fantastic duck shop very high class and looks expensive....that guy knowledge is good though.....
I changed my maz6 rims and dunlop tyres. Top up 640 in total.
Now after seeing all the after mkt rims...makes me feel gain again...LOL
have a chat w�my friend, he told me M3 com already so high nothing to mod but we change the air filter to archive more horse power.
�
is that true and does is void the warranty??
change air filter more air goes in later throttle body dirty must clean leh chey....done that before....have a chat w my friend, he told me M3 com already so high nothing to mod but we change the air filter to archive more horse power.
is that true and does is void the warranty??
Is anyone using K&N drop in air filter for their mazda 3? What's the cost and how much does it cost to oil it? (maintenance)
250 to 280 kpa (full load). So, I pump mid point, since I always have about 3 people in car.�
�
May I ask what is the downside of pumping to 280kpa even though I seldom carry full load?
Which shop is that?
I went to fantastic duck shop very high class and looks expensive....that guy knowledge is good though.....
�
shop at northstar ground floor amkWhich shop is that?
Oh, never been there. Always go to Yap bros and sometimes Leong Seng.
shop at northstar ground floor amk
�
ask liao....mostly 18" rims.....Oh, never been there. Always go to Yap bros and sometimes Leong Seng.
Ic. I asked for Soul red with ex-stock and coming in on 10 Nov shpt.
SC give me his confidence that next week I sure get my coe (opt for 6 n-g bids)
My SC told me no stock for the colour i wanted and will have to wait till Sept production. Since i got trade in car, the longer they delay, the lesser is the depreciation which is fine for me... Haha.
When i see him for 2nd appt, he show me a piece of slip which indeed my car is under Sept production! He kept saying "your car fresh from the oven... Sio sio... "
May I ask what is the downside of pumping to 280kpa even though I seldom carry full load?
Downside, lesser grip.
Upside, better rolling.
Ooohhhh, maybe you speak more to the guy? Maybe they'll have rims within your budget?I went to fantastic duck shop very high class and looks expensive....that guy knowledge is good though.....
That's alright, not too much to top up for your rims and tyres..I changed my maz6 rims and dunlop tyres. Top up 640 in total.
Now after seeing all the after mkt rims...makes me feel gain again...LOL
Btw, for remainder payment for deposit, my SE said can drop the cheque directly with the bank. No need to go to the showroom to make the payment, anyone did that?
Edited by momoechan, 29 October 2015 - 04:48 PM.
Downside, lesser grip.
Upside, better rolling.
�
Thanks
May I ask what is the downside of pumping to 280kpa even though I seldom carry full load?
�
�
IMO, dont look at the numbers alone.... how much to pump really depends on the type of tyre and your driving style... example (latio, 16") the sweet spot for my butt feel with Kumho� KU31 is ~270Kpa but when i was on Hankook V12, even 250Kpa already too hard to my liking and tense to lose grip on hard corner but with Ku31 (270Kpa), still grippy with the same hard corner...
May I ask what is the downside of pumping to 280kpa even though I seldom carry full load?
�
If the tyres are still new, I don't think there's major downside, except maybe its a harder ride.
Edited by ST69, 29 October 2015 - 06:10 PM.
Ooohhhh, maybe you speak more to the guy? Maybe they'll have rims within your budget?
That's alright, not too much to top up for your rims and tyres..
Btw, for remainder payment for deposit, my SE said can drop the cheque directly with the bank. No need to go to the showroom to make the payment, anyone did that?
Yes I made payment for the remainder at the bank directly.
Yes I was referring to your car:)
Thanks, good sir.:)
Edited by minsanity, 29 October 2015 - 09:44 PM.
Hello all, a friend, fantastic_duck, made me aware of this forum. Just wanna learn & share. Here are pix of my '14 M3 aka BlackMouth.:)
Damn sex!!
Your car is awesome....
I went to fantastic duck shop very high class and looks expensive....that guy knowledge is good though.....
Not my shop lah... I don't earn commission. But I really think through very long before committing...
Yes I made payment for the remainder at the bank directly.
No problems with transferring the money to the bank? My only concern is with bank account, instead of giving me Eurokars' bank acct, he gave me his
Yes you are right ... That's the shop I shared with bro Axela
Hi Fantastic_Duck and Axela,
�
the owner of AC Gruppen gave me� lesson 101 about tires...
�
let me know if you are visiting Arrow tyres. I can "hook" you guys up.
I am still deciding which 17" to go with mine. Gloss back or Matt Black or even Vossen Rims
Attached Thumbnails
Attached Thumbnails
pm u....nice rims.interested!Hi Fantastic_Duck and Axela,
the owner of AC Gruppen gave me lesson 101 about tires...
let me know if you are visiting Arrow tyres. I can "hook" you guys up.
I am still deciding which 17" to go with mine. Gloss back or Matt Black or even Vossen Rims
Oh yeah guys, i love my beauty...
White is good!
Edited by ckschan99, 30 October 2015 - 07:05 PM.
Vossen rims how much? Real or replica?Hi Fantastic_Duck and Axela,
the owner of AC Gruppen gave me lesson 101 about tires...
let me know if you are visiting Arrow tyres. I can "hook" you guys up.
I am still deciding which 17" to go with mine. Gloss back or Matt Black or even Vossen Rims
Some cars have an auto light off after engine off and doors closed. I know mz3 has this coming home light function. But there are conditions for it to work and you need pull the light stalk to activate it. Can it be auto or am I doing it wrongly?
Edited by EstherLui, 30 October 2015 - 08:18 PM.
I read some post back that the navigation need to connect to wifi or link to our hand phone data plan. Is it correct?
If I plan to go over to Malaysia, does the navigation need to connect to wifi or data plan for excess?
Hi Fantastic_Duck and Axela,
the owner of AC Gruppen gave me lesson 101 about tires...
let me know if you are visiting Arrow tyres. I can "hook" you guys up.
I am still deciding which 17" to go with mine. Gloss back or Matt Black or even Vossen Rims
Very nice!
He is a nice guy, Jun that's why I buy from him. He is willing to stay back after the shop close to explain everything in detail to me. Imo very hard to find such customer service oriented shops, even stupid questions he will still answer you.
How much do tyre shops offer for trade in of 18" mazda 3 rims?
Sorry noob question from a new bird.
I read some post back that the navigation need to connect to wifi or link to our hand phone data plan. Is it correct?
If I plan to go over to Malaysia, does the navigation need to connect to wifi or data plan for excess?
i don't think it uses data plan as it lock on to GPS signal. But you connect to wifi to update the mzconnect. As for going to malaysia, if you have the map loaded, then it shouldn't be a problem.
Edited by Huge, 30 October 2015 - 09:31 PM.
So happy! Now what's left... Let's see... Oh yes... Short of a car....
Below are some unboxing pics. I have one more spare set courtesy of minsanity. PM me if you interested.
Attached Thumbnails
Oh yes... I also bought these from eBay... They are seat belt fasteners, white coloured leather to suit the Colour of my white leather interior
Attached Thumbnails
I've also noticed that most are talking wheels on here. Please allow me to share some of our buddies'& a fellow revolutionist's...
WedsSport SA-67R 18x8 et45 225/45
Enkei RPF1 19x8 et48 225/40/19
SSR GTV02 18x8 et48 225/45/18
ROH Mantis 19x8 et55 w/ 6mm spacers 245/35/19
LC818 19x8.5 et45 245/35/19
OE M6 19x7.5 et45 225/40/19
LC818 19x8.5 et45 225/40/19
VR G25 19x8.5 et45 235/35/19
AirForce Suspension
Hope y'all enjoyed.
Fantastic_Duck, good bud sir, thanks for letting me know about this warm & awesome Mown3r thread. Regards & God bless!
Edited by minsanity, 30 October 2015 - 09:57 PM.
Just got my Mazda 3 plate relocator today... Yeah!
So happy! Now what's left... Let's see... Oh yes... Short of a car....
Below are some unboxing pics. I have one more spare set courtesy of minsanity. PM me if you interested.
Thanks much for sharing that humble little mod for Mown3rs by Mown3rs, Fantastic_Duck buddy. The pics of cars I shared above are all using that reversible no-drill relocator kit. Fantastic_duck has a spare 1.
Thanks, my friend!!!!
Thanks much for sharing that humble little mod for Mown3rs by Mown3rs, Fantastic_Duck buddy. The pics of cars I shared above are all using that reversible no-drill relocator kit. Fantastic_duck has a spare 1.
Thanks, my friend!!!!
Not at all, glad we share the same passion!
http://s1280.photobu...s2aatw.jpg.html
I love these rims. I am not sure if a yellow or red colored BBK (big brake kit) would look nicer on a soul red Mazda... What do you all think? Should I get yellow or red BBKs?
Some cars have an auto light off after engine off and doors closed. I know mz3 has this coming home light function. But there are conditions for it to work and you need pull the light stalk to activate it. Can it be auto or am I doing it wrongly?
I have been reading the manual but i still couldn't figure it out how the coming home/leaving home lights work.
Anyone can advise how this work?
Not at all, glad we share the same passion!
http://s1280.photobu...s2aatw.jpg.html
I love these rims. I am not sure if a yellow or red colored BBK (big brake kit) would look nicer on a soul red Mazda... What do you all think? Should I get yellow or red BBKs?
I think the yellow one will look nicer.
Btw to change to this, do i have to replace the whole brake disc kit or just install the clip only?
Duck: Yellow on red are better. What brakes are you getting?
Hope y'all enjoyed.
Fantastic_Duck, good bud sir, thanks for letting me know about this warm & awesome Mown3r thread. Regards & God bless!
I see that there is red thing on the headlight of the white mazda. Looks nice. May i know what is that?
Edited by cheealan, 30 October 2015 - 11:02 PM.
That white 1 is in the US, therefore US spec lamps w/ amber yolks.:)I see that there is red thing on the headlight of the white mazda. Looks nice. May i know what is that?
Duck: Yellow on red are better. What brakes are you getting?
Thanks for the feedback.. i am getting AP Racing
I think the yellow one will look nicer.
Btw to change to this, do i have to replace the whole brake disc kit or just install the clip only?
�
Thanks for your reply Cheealan. I replace the whole brake disc, I read online that putting the caliper cover may be dangerous, drive halfway the clip come loose and get caught inside the wheel...jialat
�
Just changed my Avatar picture so that it looks like a fantastic duck
Edited by Fantastic_Duck, 30 October 2015 - 11:10 PM.
SE say gotta be not on auto headlamp and activate using buttons on key fob for unlock/lock.
I have been reading the manual but i still couldn't figure it out how the coming home/leaving home lights work.
Anyone can advise how this work?
�
SE say gotta be not on auto headlamp and activate using buttons on key fob for unlock/lock.
No need to pull any lever?
Thanks for the feedback.. i am getting AP Racing
Thanks for your reply Cheealan. I replace the whole brake disc, I read online that putting the caliper cover may be dangerous, drive halfway the clip come loose and get caught inside the wheel...jialat
Just changed my Avatar picture so that it looks like a fantastic duck
Your new avatar looks really cool..
That white 1 is in the US, therefore US spec lamps w/ amber yolks.:)
I see. Thanks
Thanks y'all for the warm welcome on here. momoechan, the car is aluminum metallic/liquid silver 38P.
I've also noticed that most are talking wheels on here. Please allow me to share some of our buddies'& a fellow revolutionist's...
Hope y'all enjoyed.
Fantastic_Duck, good bud sir, thanks for letting me know about this warm & awesome Mown3r thread. Regards & God bless!
Oic, somehow it looked like there's a tinge of blue from my iPad, so I thought you had special paint done for your car. Thanks for sharing pix of the rims, they are soooooo nice, very tempting.....
Nope. Was just asking him last night how to see the home coming lights.
No need to pull any lever?
�
�
If anyone wants to know more about what Fantastic_Duck got, it's a front plate relocator kit that mimics the Mazda6 location. It takes about 10minutes w/ no special tools but an 11mm socket.No drilling, no scarring, reversible....Just got my Mazda 3 plate relocator today... Yeah!
So happy! Now what's left... Let's see... Oh yes... Short of a car....
Below are some unboxing pics. I have one more spare set courtesy of minsanity. PM me if you interested.
Again, gratitude to my buddy, Fantastic_Duck. Anyone interested, he has 1 spare kit. Thanks, all.:)
Going Arrow for window shopping....
Fantastic_Duck bro, PM send...:)
�
Just got my Mazda 3 plate relocator today... Yeah!
So happy! Now what's left... Let's see... Oh yes... Short of a car....
Below are some unboxing pics. I have one more spare set courtesy of minsanity. PM me if you interested.
�
Please note that it's not a commercial enterprise, and there is only one plate relocator. The other one is with me and I am not selling unless you pay me this amount (see link below) http://vignette3.wik...=20130727183557
I am not earning anything, just doing my bit for a good bro from Philippines. I know it's a bit expensive, but the price is not decided by me. If you take too long to think about it, bear in mind there is only one and first come first serve. ???????????????????
Anyway you can always buy plate relocator that is cheaper off eBay or aliexpress, but you need to drill onto the bumper. Unless you insert the tow hook relocator which costs about 80 USD from eBay incl shipping. http://www.ebay.com/itm/121721303814
Another disclaimer. I have not received my car yet so I don't know how the SG plate will look like on it unless any bro or sis here willing to be Guinea pig....
Nope. Was just asking him last night how to see the home coming lights.
Thanks bro.
Rims Size : 18 x 8 JJ
Tyre Size : 225/45-R18
Edited by SteveLim1969, 31 October 2015 - 12:19 PM.
My ride my pride.
Rims Size : 18 x 8 JJ
Tyre Size : 225/45-R18Photo 28-3-15 5 04 55 pm.jpeg
Matches your car body colour! When did u get your car/wheels?
Nice 18". how ur FC aft using 18"?
�
My ride my pride.
Rims Size : 18 x 8 JJ
Tyre Size : 225/45-R18
�
My ride my pride.
Rims Size : 18 x 8 JJ
Tyre Size : 225/45-R18
Nice. Looks like aston martin haha.
The rims will be a nightmare to wash... I used to have such rims also.
Nice. Looks like aston martin haha.
The rims will be a nightmare to wash... I used to have such rims also.
Yes, it's easier to wash with less spokes like the SSR kind
I need to decide whether there is a need to buy additional license plate frames like this one http://world.tmall.c...uId=72050659718
RE 003 Potenza better or Toyo �T 1 sport in terms of performance and noise level and grip! Thks!
That was in March, after my 1k servicing.
Before mounting, I brought my bare rims for CeramicPro treatment as advised by George. Nothing sticks to it now. Already 7 months.
Before changing, my fuel efficiency was at 7.4. Immediately after changing it became 7.8. But gradually over 5 months, have managed to get back to 7.4.
My first reaction upon changing was that acceleration wasn't that bad affected. There was a clear difference, but perhaps i was mentally prepared for worse. Well, i still can be first off at green light most of the time without having to rev it really hard. So, acceleration is still very decent.
Road noise was definately higher and also the ride was harder. But my (also wifey) love for the looks made us oblivious to it.
Matches your car body colour! When did u get your car/wheels?
I traded in for these rims/tyres at Hurry Tyres along Bukit Timah.
That was in March, after my 1k servicing.
Before mounting, I brought my bare rims for CeramicPro treatment as advised by George. Nothing sticks to it now. Already 7 months.
Before changing, my fuel efficiency was at 7.4. Immediately after changing it became 7.8. But gradually over 5 months, have managed to get back to 7.4.
My first reaction upon changing was that acceleration wasn't that bad affected. There was a clear difference, but perhaps i was mentally prepared for worse. Well, i still can be first off at green light most of the time without having to rev it really hard. So, acceleration is still very decent.
Road noise was definately higher and also the ride was harder. But my (also wifey) love for the looks made us oblivious to it.
7.4 7.8 is very high leh....
Im using 17"..avg 6.6 to 6.8
Any Mz3 owners here can help measure the distance between the screw holes on the front license plate ?
I need to decide whether there is a need to buy additional license plate frames like this one http://world.tmall.c...uId=72050659718
If your sg plate size is identical w/ euro 1s, I believe something like this would spare you from boring holes on your sg plate, brothah....
http://www.mycarforu...d&product=59774
Hope you can check. Thanks.:)
Không có nhận xét nào:
Đăng nhận xét