mycarforum: 2014 Mazda 3 part 73

Maybe you show us the link?

We only have one variant for 2.0l Mazda 3 in SG unlike other countries.

I am quite sure asked the same question to SE have Bose or not? The answer was abviiusly a no. Also did not mentioned in the brochre... only mentioned 6 speakers..

�

Locally got no "link" showing the validity. It was poster of someone above saying there is, though not sure if he is refering to local context or US

swee and any extra to spare

�

swee and any extra to spare

Nope...scare quality no good so dun dare order more...3 weeks! wait until i forgotten!

Edited by Axela525, 29 December 2015 - 11:41 AM.

swee and any extra to spare

Such stickers can get locally easily.

Locally got no "link" showing the validity. It was poster of someone above saying there is, though not sure if he is refering to local context or US

Oic... anyway you got ride liao?

the factory fitted MZD connect works perfectly fine.
he bought the std and retro fitted it with china made unit, what do you expect?

as mentioned previously, i used to drive wrx and i dont feel maz3 is floaty at 120km/hr - disclaimer: i changed my rims/tyres.
the handling is good....compared to Lancer EX 1.5 but lose out to WRX.

so far my problem was resolved within 1 visit to eurokars (leng kee).

well, i think if the guy is so unhappy with the car, should just sell it soon :)

Just maybe, a SE from another car brand lol!

OMG! They actually put a subwoofer at the spare tyre area? Very clever leh, especially for the lack of space for the M3....

�

It's a common practice nowadays when looking for a place for a subwoofer. [;)]

don't know why he bought it at the first place

last weekend I was on NSHW and mine MZ3 HB didn't float (I was driving at between 130 to 140 with 17" Mazda rims and Dunlop SportMaxx).

Probably heavy rims and good tyre play a part??

Aiyoooo how to drive 120 in sg hahahah.... Now TP so ON... Hide hide here, hide hide there overhead bridge.
My heart will float to my mouth if always 120. My heart beat will 120 bpm too. My wallet will float too if kenna the heavy fine. My wife will scream at me 120decibel if i drive fast lol!!

sad to see this review...:( really that bad meh??? I feel the opposite way...

http://www.sgcarmart...64#comments3864

Review
I dont why this car is getting such good reviews and high numbers of stars.
Maybe for start; The cars I have driven (for a period of time) / owned over the years so that's indicate where my expectations and comparsion are;
- Lancer GLXi 1.6, Lancer EX 1.5
- Civic Vti 1.6
- Altis 1.6, Vios 1.5, Camry 2.0
- BMW118
- Sunny 1.6
- C180
- K5 2.4

What I like
Interior is nice and comfortable, that's probably the only good thing I have for Mazda3

What I do not like
Lots of built in gadget / features don't really work as expected or not easy to to use.
My Mazda3 comes with local fitted entertainments system (sadly it'ss probably a cheap china product)
Touch screen is not sensitive, GPS doesnt work, GPS problem is identified, ack as a problem but cant solved despite several visits to TransEuro and Tong Lee Wee Auto (supplier of this entertainment system to TransEuro).

Handling to me is poor, steering to too "light".
At speed >120km/hr, this car already start to float.

Position of side mirror is not to my liking.

when we buy a car, it comes with warranty and servicing which complete the entire buying experience. Sadly the after sales by TransEuro sucks good time.
So many cars I have owned and service centres I visited, TransEuro is worst,
no one even comes near their low level of service.
A service line which hardly anyone answers, service advisor who provide HP but doesnt answer nor bothers to call back.
Small little problem which usually takes several visits to solve.
And their favour tag line " erm... its like this one, nothing much we can do, this comes from Japan factory"

Maybe its just me, my expectation.
Take my comments with a pinch of salt.

Well. Every cars had its own sets of tiny winy problem. I used to drive 4 onion rings and they themselves had their sets of problems (I tell you. It's out of the world and you should try their service center) but i still enjoy my ride. Since or if you had bought it might as well enjoy it. Cheers!!!

Any idea is the plan still going on?� [wave]

Of course! U r the man i want to meet... lol

BTW, i dunno where is a good place for the meetup.�

�

Seems like 1st Jan and 9am a few of us can meet le....�

�

It's a common practice nowadays when looking for a place for a subwoofer.

Lol!
But wonder if it still works as intended with the woofer covered on top by the floor board and then filled with barangs barangs also...

Just checking if the
MAZDA 3 1.5L Sedan Deluxe
Comes fitted with BOSE speakers?

�

Not in the local SG version. �It comes with 6 speakers system, not sure which brand.

Edited by danzo, 29 December 2015 - 05:51 PM.

Well. Every cars had its own sets of tiny winy problem. I used to drive 4 onion rings and they themselves had their sets of problems (I tell you. It's out of the world and you should try their service center) but i still enjoy my ride. Since or if you had bought it might as well enjoy it. Cheers!!!

My colleague bought the 4 onion rings and omg, sent for repair within a few weeks... Put me off immediately...
"I rather eat nice chicken rice in hawker paying hawker price then paying 10x $$ eating the same dish in restaurant. " hahahah value for $$

I was looking to buy the 4 rings too since the price difference not big but the specs were really a letdown.

Ended up with maz3. If I have waited, I will get subaru VX (107k) or Qashqai (110k) now...

Most probably QQ...

Just maybe, a SE from another car brand lol!

Hahahaha... that was i think so too

Bro, my best bet is intentionally done by same person.

Scratch is obvious... And next he or she smashed your headlight.

I may be wrong though.

Bro, my best bet is intentionally done by same person.

Scratch is obvious... And next he or she smashed your headlight.

I may be wrong though.

�

The headlight looks like hit by reverse. Should I report police? Considering to change camera to a constant on type. Ever since I dont park there, I dont get anything anymore.

I'm collecting my unit on 15 January 2016
Shall we Organise a meet up to share and discuss experiences?
Not sure Seletar Dam can park one side now...

Hahahaaa must sound like auntie, if sound like chio bu sexy sound... That line will be "hot"-line liao lol!!!!!

�

Got me thinking of Drake's Hotline Bling song.� [laugh] � [laugh]

And one more thing. I find the service centre ok leh. Email them this morning on the date for my 1k servicing. Reply at about 4 plus. In the Web they mentioned 48hrs.

Although the service centre staff sounded like aunty (the way she spoke) but she is very helpful to find me the earliest timing which is on 19 next month. Not bad mah.

Usually I plan my servicing date by estimating the average distance cover per day.
Cheers!!

�

Wow... that's really fast reply from Mazda. I can do that next time. I had wanted to email them yesterday after calling Ubi service center countless times for 2 days with no one picking up the phone. At the end, I called Leng Kee service center and managed to get a slot on 18 January.� -_-

Any idea is the plan still going on?

Bro no plan. If can fix a place then we meet ok.

Wow... that's really fast reply from Mazda. I can do that next time. I had wanted to email them yesterday after calling Ubi service center countless times for 2 days with no one picking up the phone. At the end, I called Leng Kee service center and managed to get a slot on 18 January.

When I was at ubi...their service consultant (aunties) all shake leg one lei...
Maybe their hearing bo ho....thats why... haha..
Think Mr Kwee should ask some of the SYT from porsche to come over....

V smart of him to take over mazda dealership. Anything that's leftover from Roll Royce, Porsche, Mini...pass over to mazda.. lol...

Btw, they use 1 service bus (to mrt) to serve all the brands under them...

Anyone manage to get the obd brake lock which will automatically lock up when u step on brake ? AskEd ad and they claimed they dun have its module
By the time I service my 1k , my milage already 1.8k liao. Somemore sent in at 9 only get to handover the car at 945am. Then able to collect my cat at 4 pm. Business too good

Hi, anyone interested in getting the "Mugen" lookalike wind deflectors for the M3 sedan? I have ordered through JDM but decided not to have it. I'm willing to let go at a discount and you can have it collected and installed by them. PM me if interested. Thanks

Edited by kodo, 30 December 2015 - 10:45 AM.

Finally have time to fix those that I wants/needs to make my ride more stability &�look good

�

Fix�Ultra Racing Strut Bar (mostly likely will install Front lower arm bar & Anti Roll bar)

�

Change Fog light bulb to Bluexion Bulb H11 5000K Super White

�

Fix�foot Pedal

�

Bought MazdaSpeed Emblem (but don't know where is the better location to paste on)

�

Guess you will install the UR strut bar/s when you said you going to E-Rev yesterday� [thumbsup]

Finally have time to fix those that I wants/needs to make my ride more stability &�look good

�

Fix�Ultra Racing Strut Bar (mostly likely will install Front lower arm bar & Anti Roll bar)

�

�

Change Fog light bulb to Bluexion Bulb H11 5000K Super White

�

�

�

Fix�foot Pedal

�

�

�

Bought MazdaSpeed Emblem (but don't know where is the better location to paste on)

�

�

�

mine lagi better email them in the morning and call me after 15mins to confirm my 1K servicing and now waiting for my 5K servicing or due on 21 Mar.

�

now my mileage read as 2'4++ and CNY will be going up to Changlun (Alor Setar) (total: 2'000km To & Fro). It will be just nice for 5K servicing when I back...:)

And one more thing. I find the service centre ok leh. Email them this morning on the date for my 1k servicing. Reply at about 4 plus. In the Web they mentioned 48hrs.

Although the service centre staff sounded like aunty (the way she spoke) but she is very helpful to find me the earliest timing which is on 19 next month. Not bad mah.

Usually I plan my servicing date by estimating the average distance cover per day.
Cheers!!

�

yup, they recommended to install front lower arm bar & anti roll bar.

but still thinking whether to install anot

Guess you will install the UR strut bar/s when you said you going to E-Rev yesterday�

�

Edited by AhKn, 30 December 2015 - 11:11 AM.

ARB will be good to have. Not sure whether the Mz3 and Mz 2 have or not. Must look when raised.

yup, they recommended to install front lower arm bar & anti roll bar.

but still thinking whether to install anot

�

ARB will be good to have. Not sure whether the Mz3 and Mz 2 have or not. Must look when raised.

�

i also want to install rear arb. =) do together got discount? [:p]

if the center portion of the car can have it will be good too!

Edited by Swiftgolfer, 30 December 2015 - 11:26 AM.

mine lagi better email them in the morning and call me after 15mins to confirm my 1K servicing and now waiting for my 5K servicing or due on 21 Mar.

now my mileage read as 2'4++ and CNY will be going up to Changlun (Alor Setar) (total: 2'000km To & Fro). It will be just nice for 5K servicing when I back...:)

yup, they recommended to install front lower arm bar & anti roll bar.
but still thinking whether to install anot

How much does the bars cost? O.o?

Will install strut bar void any warranty

just wondering, anyone hear any sounds coming from the rear of the car when going over bumps? those short sharp bumps.

I think shld have discount if we fix together.

AN overview of bar needed for...

i also want to install rear arb. =) do together got discount?

if the center portion of the car can have it will be good too!

brand new 150 included installation

How much does the bars cost? O.o?

I doubt it will not ba.�any bros can advise if they had send in for servicing with strut bar and Mazda say warranty voided?

Will install strut bar void any warranty

I only heard sound coming from the front and I had asked TEK to check and they say it will take half a day to check and�solve this issues.�

�

There is a thread on this question but not sure it is similar to urs?

�

http://www.mycarforu...owly-over-hump/

�

just wondering, anyone hear any sounds coming from the rear of the car when going over bumps? those short sharp bumps.

�

Edited by AhKn, 30 December 2015 - 02:07 PM.

I think shld have discount if we fix together.

AN overview of bar needed for...

�

�

[laugh] �So many bars to change. They could cost you a fortune. IMO they are only useful if you plan to track or drift your car.�

lol, not all the bar we need to install...:) if we are planning to track then�install all.

probably 3 bars will do, Front strut bar, front lower arm bar 4pt & rear anti roll bar (total cost include installation 670).

�So many bars to change. They could cost you a fortune. IMO they are only useful if you plan to track or drift your car.�

�

Edited by AhKn, 30 December 2015 - 02:13 PM.

Will install strut bar void any warranty

�

It shouldn't. Just make sure they tighten down the locking nuts. I had a bad experience with a workshop that didn't tighten the nuts properly after installing new front struts in my previous car. One of the nuts was only a few turns down the thread� [mad] . Luckily, I found that out the next day when checking my engine bay and nothing happened to me while driving home from the workshop the day before. I went back to the shop and flame them. KNN didn't even apologise to me. The manager just said this thing can happen because they are too busy :yuush: �.

I think shld have discount if we fix together.

AN overview of bar needed for...

brand new 150 included installation

I doubt it will not ba.�any bros can advise if they had send in for servicing with strut bar and Mazda say warranty voided?

I only heard sound coming from the front and I had asked TEK to check and they say it will take half a day to check and�solve this issues.�

�

There is a thread on this question but not sure it is similar to urs?

�

http://www.mycarforu...owly-over-hump/

�

That's a lot of added weight too.
�

Wow like that oso can; this can happen as they are too busy!!!

Thk for highlighting and will check all nuts later.

It shouldn't. Just make sure they tighten down the locking nuts. I had a bad experience with a workshop that didn't tighten the nuts properly after installing new front struts in my previous car. One of the nuts was only a few turns down the thread� . Luckily, I found that out the next day when checking my engine bay and nothing happened to me while driving home from the workshop the day before. I went back to the shop and flame them. KNN didn't even apologise to me. The manager just said this thing can happen because they are too busy �.

�

I will also install the same 3 braces that you mentioned.�

However i am waiting for Cusco to come out for the Mzada 2.

lol, not all the bar we need to install...:) if we are planning to track then�install all.

probably 3 bars will do, Front strut bar, front lower arm bar 4pt & rear anti roll bar (total cost include installation 670).

�

hmm, I didn't ask about the weight of all bars and I believe this will not affect our FC.

�

anyway, I changed my rims to original 17" Mazda (which is heavy than 16") and my FC still at 7.6.

I quite happy about it and not regret aft changing to 17" (my�wife�happy can liao)...:)

That's a lot of added weight too.
�

�

Good choice� :want: ��btw I'm asking E-REV whether is there any UR for MZ2.�

I will also install the same 3 braces that you mentioned.�

However i am waiting for Cusco to come out for the Mzada 2.

�

Edited by AhKn, 30 December 2015 - 02:42 PM.

Do let me know bro.

Good choice� ��btw I'm asking E-REV whether is there any UR for MZ2.�

�

bro, ur MZ2 is DJ series rite?

�

they have no stock and need to order.

�

they have front strut bar 2pt (150) & front lower arm 4pt (215)�and they don't have rear anti roll bar.

Do let me know bro.

�

Yeah DJ, quite cheap leh their price.

�

bro, ur MZ2 is DJ series rite?

�

they have no stock and need to order.

�

they have front strut bar 2pt (150) & front lower arm 4pt (215)�and they don't have rear anti roll bar.

�

did u get quoted from other workshop??

I was quoted for MZ3 Front strut bar 150 (Fixed), front lower arm bar�220 & Rear anti roll bar 300 = 670

Yeah DJ, quite cheap leh their price.

�

Edited by AhKn, 30 December 2015 - 03:32 PM.

No Japanese brand strut bars for my ride is available locally yet.� [smallcry]

did u get quoted from other workshop??

I was quoted for MZ3 Front strut bar 150 (Fixed), front lower arm bar�220 & Rear anti roll bar 300 = 670

�

IC, but pls note that UR is from our neighbor country�http://ultraracing.my/v1/�and probably the price is cheap.

maybe japan brand cost more and better stability than UR (my guess)

No Japanese brand strut bars for my ride is available locally yet.�

�

Edited by AhKn, 30 December 2015 - 03:56 PM.

Yeah i am aware the UR is from Malaysia.�

�

I am not saying japanese brand have better stability but it definitely cost more and have better build and retrial used. Also re-sale is much easier.

IC, but pls note that UR is from our neighbor country�http://ultraracing.my/v1/�and probably the price is cheap.

�

maybe japan brand cost more and better stability than UR (my guess)

�

btw, they do bring in K&N drop in Air filter but current no stock and need to wait for next shipment from USA.�

�

I will change it once it is available

Yeah i am aware the UR is from Malaysia.�

�

I am not saying japanese brand have better stability but it definitely cost more and have better build and retrial used. Also re-sale is much easier.

�

Prefer foam or paper filters. Mesh filters is a bitch when it comes to washing and oiling. Do keep your stock filter for that.

btw, they do bring in K&N drop in Air filter but current no stock and need to wait for next shipment from USA.�

�

I will change it once it is available

�

moment of truth...

�

the original 16" rim weight is 8.7kg.

�

http://mazda3revolut...t-16-alloy.html

�

Mazda 6 17" is 9kg+ if i remember correctly..i weighted it once before fitting it on.

moment of truth...

the original 16" rim weight is 8.7kg.

http://mazda3revolut...t-16-alloy.html

Mazda 6 17" is 9kg+ if i remember correctly..i weighted it once before fitting it on.

Wa... like that the stock 18" rims should be even heavier liao

hmm, I didn't ask about the weight of all bars and I believe this will not affect our FC.

anyway, I changed my rims to original 17" Mazda (which is heavy than 16") and my FC still at 7.6.
I quite happy about it and not regret aft changing to 17" (my wife happy can liao)...:)

Cool! U get the 17" from the AD? $$?

very chio makeover, overall dmg?

Wow ur babe is so sexy!!! any chance to have all rounded photo?

Btw, ur Madza rims is 18" or 19"?

At last, my babe went thru the knife n everything is a success lol!
Enlarged her front xxx, slim her waistline at side, shape her butt.... And now here she is!
Lol! Glad the operation is a success! Yeah!!
Many photos of her posing in different position (what u thinking!!??) can be found in the JDM fb. Just hot from oven!!
Hahahahaaha!!!

hehe, use 16" to trade for 17"

Cool! U get the 17" from the AD? $$?

�

Edited by AhKn, 30 December 2015 - 04:40 PM.

very chio makeover, overall dmg?

Dmg my wallet very jialat... 1.2
Heard my babe is the first one under the knife...lol!!

Its a lip kit right?

Dmg my wallet very jialat... 1.2
Heard my babe is the first one under the knife...lol!!

�

Wow ur babe is so sexy!!! any chance to have all rounded photo?
Btw, ur Madza rims is 18" or 19"?
hehe, use 16" to trade for 17"

Yes, under the Fb, type "JDM Autocare"
My surgeon take alot of photos of her, front back side...
Damn.. Should have collect royalities hahahaa....

Alamak u spot her weakness liao. Still wearing 16", no more $$ to up her cup,sorry i mean, her wheel size to 18" lor. Sob sob!!

Its a lip kit right?

No lol! More than lip... Still got more, side n backside...

(My real wife jeolus and say how come i didn't send her for make-over surgery instead)
Hahahahaha.... Boys boys boys....our toy mah....

Wow, I just saw it in FB and the overall look sexy to me.

�

lol I like ur phase "her cup"...:)�

�

Btw, I was quoted for PU Plastic bodykit for MZ3 HB at 750. izzit expensive or reasonable?

Yes, under the Fb, type "JDM Autocare"
My surgeon take alot of photos of her, front back side...
Damn.. Should have collect royalities hahahaa....

Alamak u spot her weakness liao. Still wearing 16", no more $$ to up her cup,sorry i mean, her wheel size to 18" lor. Sob sob!!

No lol! More than lip... Still got more, side n backside...

(My real wife jeolus and say how come i didn't send her for make-over surgery instead)
Hahahahaha.... Boys boys boys....our toy mah....

�

Edited by AhKn, 30 December 2015 - 04:56 PM.

Have any bros change the front Mazda logo to black color?

Do I need to order them or just�DIY to paint it black?

�

http://www.streetuni...um32014bofr.htm

Yes, under the Fb, type "JDM Autocare"
My surgeon take alot of photos of her, front back side...
Damn.. Should have collect royalities hahahaa....

Alamak u spot her weakness liao. Still wearing 16", no more $$ to up her cup,sorry i mean, her wheel size to 18" lor. Sob sob!!

No lol! More than lip... Still got more, side n backside...

(My real wife jeolus and say how come i didn't send her for make-over surgery instead)
Hahahahaha.... Boys boys boys....our toy mah....

Haha of course there is still the skirts and rear but what I meant is it a lip kit it full bumper replacement kit.

Have any bros change the front Mazda logo to black color?
Do I need to order them or just DIY to paint it black?

http://www.streetuni...um32014bofr.htm

I had. Just use plasti-dip and DIY.

Wow, I just saw it in FB and the overall look sexy to me.

lol I like ur phase "her cup"...:)

Btw, I was quoted for PU Plastic bodykit for MZ3 HB at 750. izzit expensive or reasonable?

Lol!

Seems reasonable , i guess, if included paintwork n installation... Also depends on the bodykit design too.

Haha of course there is still the skirts and rear but what I meant is it a lip kit it full bumper replacement kit.
I had. Just use plasti-dip and DIY.

Take out and dip it then paste back

Haha of course there is still the skirts and rear but what I meant is it a lip kit it full bumper replacement kit.
I had. Just use plasti-dip and DIY.

Take out and dip it then paste back

At last, my babe went thru the knife n everything is a success lol!
Enlarged her front xxx, slim her waistline at side, shape her butt.... And now here she is!
Lol! Glad the operation is a success! Yeah!!
Many photos of her posing in different position (what u thinking!!??) can be found in the JDM fb. Just hot from oven!!
Hahahahaaha!!!

�

hmmmmmmmmm not much diff to me lei..

looks the same..LOL

�

ok. went to jdm webbie to see...

the shade of white doesnt look matching..

�

i will stick to stock.... �

Edited by Privacy, 30 December 2015 - 05:29 PM.

Take out and dip it then paste back
Take out and dip it then paste back

Just mask, spray and peel. If you want a professional plasti-dipper I can recommend mine.

For those bros asked me the measurement of square plate.
It measure at 34 x 18 cm

just wondering, anyone hear any sounds coming from the rear of the car when going over bumps? those short sharp bumps.

I experience this too

Haha of course there is still the skirts and rear but what I meant is it a lip kit it full bumper replacement kit.
I had. Just use plasti-dip and DIY.

Oh, hahaha... Sori sorry... Keekeekee my bad.
It is a add on to existing bumper.... ;)

btw, they do bring in K&N drop in Air filter but current no stock and need to wait for next shipment from USA.

I will change it once it is available

Do you know how much they're selling the K&N filter for? Also, is the filter for the 1.5l the same one that is used on the 2l version?

hmmmmmmmmm not much diff to me lei..
looks the same..LOL

ok. went to jdm webbie to see...
the shade of white doesnt look matching..

i will stick to stock....

Lol!!! My babe faint.

Kekekeke.... ;)

Just mask, spray and peel. If you want a professional plasti-dipper I can recommend mine.

Is it this spray that form a plastic or rubbery layer after dry and then can peel off easily once u want to change color or remove back to the original state?
I saw somewhere they use that for color of the rims...

Wow... swee!!!
Drooling liao

U haven't see her drenched wet in the rain... LOL!!!!
Luckily no rain today kekekee...

Finally have time to fix those that I wants/needs to make my ride more stability &�look good

Bought MazdaSpeed Emblem (but don't know where is the better location to paste on)

�

�

"PERFOR IANCE ACCESSORIES"? Looks kind of cruck up leh.

Nice strut bar! How much does that cost and how much of an effect does it have?

Finally have time to fix those that I wants/needs to make my ride more stability &�look good

�

Fix�Ultra Racing Strut Bar (mostly likely will install Front lower arm bar & Anti Roll bar)

�

�

Change Fog light bulb to Bluexion Bulb H11 5000K Super White

�

�

�

Fix�foot Pedal

�

�

�

Bought MazdaSpeed Emblem (but don't know where is the better location to paste on)

�

�

Last time SP version blocks the battery, always must remove strut bar then can change battery...this one block the batt?

Have any bros change the front Mazda logo to black color?

Do I need to order them or just�DIY to paint it black?

�

http://www.streetuni...um32014bofr.htm

I intend to DIY, bought the Plasti Dip from Qoo10. May do the front and back this weekend.

Lol!!! My babe faint.

Kekekeke.... ;)

Is it this spray that form a plastic or rubbery layer after dry and then can peel off easily once u want to change color or remove back to the original state?
I saw somewhere they use that for color of the rims...

Yup

Yes, price included installation and the Matt black design can be see from JDM FB. I think many bros had installed

Lol!

Seems reasonable , i guess, if included paintwork n installation... Also depends on the bodykit design too.

let us know the outcome...photos will be better...:)

I intend to DIY, bought the Plasti Dip from Qoo10. May do the front and back this weekend.

good eye sight and this was given as F.O.C, so take it.

150 and better handling when approaching bends.

"PERFOR IANCE ACCESSORIES"? Looks kind of cruck up leh.

Nice strut bar! How much does that cost and how much of an effect does it have?

�

Edited by AhKn, 30 December 2015 - 07:25 PM.

yes, pls share...:)

Just mask, spray and peel. If you want a professional plasti-dipper I can recommend mine.

�

U haven't see her drenched wet in the rain... LOL!!!!
Luckily no rain today kekekee...

Hahaha... will lovd to see the babe wet though.. so can view every angle of the beautiful babe

mycarforum

Thứ Hai, 28 tháng 11, 2016

2014 Mazda 3 part 73

Không có nhận xét nào:

Đăng nhận xét