Just got my car door step installed yesterday haha.
Nice. I was very reluctant to mess around with the electronics so I fixed a non led stainless steel kind. No fuss DIY
And yes....any tempting of electrics = void warranty... :/ bt wth, like that fix car camera also void ..
Nice. I was very reluctant to mess around with the electronics so I fixed a non led stainless steel kind. No fuss DIY
And yes....any tempting of electrics = void warranty... :/ bt wth, like that fix car camera also void ..
Best if they tell me warranty void, servicing in malaysia mazda dealer is cheaper. Haha.
No limitation in booking appointment in mazda Malaysia, and can engage outside professional service also.
Now mazda servicing appointment everyday full. Need to book 2-3 weeks advance.
Most disappointment part is they told me only first10k km change engine oil.
This is my 5th car n first time i came across with 1k km , 5k km does not need to change engine oil.
They disregard the break in period, straight away put fully syn is no good.
Hopefully japan side can explain if they use mineral engine oil to pre-run the engine else i am not convinced with mazda singapore.
Hi all, I Saw a few 2015 sold off as second hand in sgcarmart. Is the car really problematic? Thought of getting one but after reading through the pages and hearing how loud the engine is in my Mscp, I am pretty concern the reliability and how it will be in 10yrs down the road.
�
definitely less problem and more reliable than VW 1.4 versions.
Oh dear, feedback given to me on this forum was that most got their COE within first 2 attempts, that's why we went for non-gtd COE confidently but wasn't expecting to get our COE so soon either since our car is not arriving till Nov. not too sure how the Eurokars work with COE bids but I agree that they'll definitely get you your COE. Fingers crossed for you that you'll get it in Oct first bid.
Nice. Did you fix this on your own or got someone to do it for you? And this is a silly question but will it void the warranty?
Diy is impossible, i see them pull the wire.
I told them dun need LED at the first place.
But think think pay the same without LED seems not worth.
So i have ask them the confident level of doing it.
They are certainly confident and no point for them to bluff me since i pay the same amount and he save the hassle without need to install the LED function. They could have save the time.
4 malaysian chinese technical person install it and took about an hour. I see their skill ok, nearby KSL JB those accesories shop.
Voiding the warranty.
If anything electrical related i think mazda dealer will use this excuse to void warranty N i will accept that..
If mechanical failure, absorber problem and they void my warranty i will hang them up.
To me i am engineer, after they explain how they going to install i feel reasonable n low risk so i ask them to go ahead.
I just post the photo for sharing, i advise not to do it if warranty to u is important.
To me the first day i got the message from mazda singapore, my interpretion: the appointment is full and earliest advance booking is 3 weeks later, only can do servicing, no time for complain case. Meaning you can get your thing free if warranty claim, but u have to wait long long. Most pointless part is what if my mileage is 1k above by then 3 weeks? Mazda: oh try not to exceed a lot, if not you cannot claim warranty. I was like omg like that also can lol.
Diy is impossible, i see them pull the wire.
I told them dun need LED at the first place.
But think think pay the same without LED seems not worth.
So i have ask them the confident level of doing it.
They are certainly confident and no point for them to bluff me since i pay the same amount and he save the hassle without need to install the LED function. They could have save the time.
4 malaysian chinese technical person install it and took about an hour. I see their skill ok, nearby KSL JB those accesories shop.
Voiding the warranty.
If anything electrical related i think mazda dealer will use this excuse to void warranty N i will accept that..
If mechanical failure, absorber problem and they void my warranty i will hang them up.
To me i am engineer, after they explain how they going to install i feel reasonable n low risk so i ask them to go ahead.
I just post the photo for sharing, i advise not to do it if warranty to u is important.
To me the first day i got the message from mazda singapore, my interpretion: the appointment is full and earliest advance booking is 3 weeks later, only can do servicing, no time for complain case. Meaning you can get your thing free if warranty claim, but u have to wait long long. Most pointless part is what if my mileage is 1k above by then 3 weeks? Mazda: oh try not to exceed a lot, if not you cannot claim warranty. I was like omg like that also can lol.
Sounds like eurokars is nt ready to do mass market popular models...
Seems under staff!
I have to book my 1k 2 weeks in advance.
Off topic, I drove 550km frm sg to ipoh. Engine is good. Hit up to 150km/hr...pretty stable....
Lose to my wrx abit in terms of stability.
Cat A COE dropped 2k this Wed and today Mazda just released price list their new price still selling standard M3 at $106,888, in fact they even shortened the non-guaranteed 6 bid to 4. �Plus I saw one bro in the tread said he hasn't got his COE after 3 bids since 3 August, I think Eurokar must still have seriously over sold. �They like not kancheong to get business at all.�
Edited by biztycl, 25 September 2015 - 10:58 AM.
Just checked the Mazda website and it states 7" leh.
�
The LED screen is 7" . 8" film will cover the black border. And cover most of them.
The LED screen is 7" . 8" film will cover the black border. And cover most of them.
�
Does the diaso 8" one fits well, clear and responsive...? �Any photos?
I heard that the car can do video recording from iPhone. Means we use iPhone to shoot road video and record into the sd card slot in the car. Is it true? Those people who have used this function? Can you verify?
�
Never heard of it...
perhaps you are referring to the aftermarket LCD head unit (cost $1.8K) also supplied by AD for the standard M3 that look like stock but bigger 8" screen and more features?
�
When did you booked, std/dlx? got your car?
Edited by danzo, 25 September 2015 - 11:09 AM.
confirm oversold lokk at the delivery dates for those who just booked and prices still holding firm.�
�
Maybe that bro hasn't got after 3 bids purchased at $98k++. so probably have to wait a bit longer.�
Cat A COE dropped 2k this Wed and today Mazda just released price list their new price still selling standard M3 at $106,888, in fact they even shortened the non-guaranteed 6 bid to 4. �Plus I saw one bro in the tread said he hasn't got his COE after 3 bids since 3 August, I think Eurokar must still have seriously over sold. �They like not kancheong to get business at all.�
�
Just got my car door step installed yesterday haha.
�
Swee.... but if installing LED will risk voiding warranty then I rather not. �Installed mine DIY from TB S$12 only, I think no LED still looks nice too, especially considering the price, only pity it's not Mazda 3 but Japanese name Axela. �
Edited by biztycl, 25 September 2015 - 11:30 AM.
SE bedded 100 bucks short. Funny cos since the first bid, their reserved price keeps falling. Anyway my deluxe soul red arriving next mth. So SE guarantee chop me next one cfm get.
But I'm ok even if he misses all 6 bids since I have 3+ yrs more on my current ride. But that will make an example out of me though. Hahaha
�
How much you paid for your deluxe on 7 August? �If you paid much lower than current sales price maybe that's why they bidding low?
�
Anyway, like you said, no hurry for your since your current ride still have 3 years to go, you stand to gain if the COE continue to slide. �I think got chance to hit $50k if the current trend goes on. �
Mazda Connect upcoming versions with cloud and apps store features... wonder if this is already avail in the new CX-3/5?
�
Edited by danzo, 25 September 2015 - 12:47 PM.
Mazda Connect upcoming versions with cloud and apps store features... wonder if this is already avail in the new CX-3/5?
�
�
Hope they will extend the update to existing owners as well =)
�
definitely less problem and more reliable than VW 1.4 versions.
Congrats! I have failed in my 3rd bid. SE ask me relax cos shipment not in. I bought on 7 Aug.
I share with you. I bought mine after National Day, few days later than you and I got the Coe on first bidding! Mine is non guaranteed too. If yours short by $500 is it due to your dealer's incompetence? I really hope you get yours soon... Or could it be my Coe is higher than yours... Lots of possible speculation but we will never know
Edited by Fantastic_Duck, 25 September 2015 - 09:12 PM.
Best if they tell me warranty void, servicing in malaysia mazda dealer is cheaper. Haha.
No limitation in booking appointment in mazda Malaysia, and can engage outside professional service also.
Now mazda servicing appointment everyday full. Need to book 2-3 weeks advance.
Most disappointment part is they told me only first10k km change engine oil.
This is my 5th car n first time i came across with 1k km , 5k km does not need to change engine oil.
They disregard the break in period, straight away put fully syn is no good.
Hopefully japan side can explain if they use mineral engine oil to pre-run the engine else i am not convinced with mazda singapore.
I fully agree with you. By the way the LED Scuff plates look very nice... But you have 2 cars - a red and a black car is it?
Diy is impossible, i see them pull the wire.
I told them dun need LED at the first place.
But think think pay the same without LED seems not worth.
So i have ask them the confident level of doing it.
They are certainly confident and no point for them to bluff me since i pay the same amount and he save the hassle without need to install the LED function. They could have save the time.
4 malaysian chinese technical person install it and took about an hour. I see their skill ok, nearby KSL JB those accesories shop.
Voiding the warranty.
If anything electrical related i think mazda dealer will use this excuse to void warranty N i will accept that..
If mechanical failure, absorber problem and they void my warranty i will hang them up.
To me i am engineer, after they explain how they going to install i feel reasonable n low risk so i ask them to go ahead.
I just post the photo for sharing, i advise not to do it if warranty to u is important.
To me the first day i got the message from mazda singapore, my interpretion: the appointment is full and earliest advance booking is 3 weeks later, only can do servicing, no time for complain case. Meaning you can get your thing free if warranty claim, but u have to wait long long. Most pointless part is what if my mileage is 1k above by then 3 weeks? Mazda: oh try not to exceed a lot, if not you cannot claim warranty. I was like omg like that also can lol.
Thanks for sharing. I'm not an engineer, so I ask silly questions ;p but your LED scuff plate definitely looks nice, tempted but will most likely not get it since hubby isn't comfortable with mechanics pulling wires within our new car.
Read about the long wait for servicing in previous pages. Looks like they need to expand their workshop to cope with the number of new cars being sold, hmm...
Only 1 ah red, the other picture dark only, still red broI fully agree with you. By the way the LED Scuff plates look very nice... But you have 2 cars - a red and a black car is it?
Thanks for sharing. I'm not an engineer, so I ask silly questions ;p but your LED scuff plate definitely looks nice, tempted but will most likely not get it since hubby isn't comfortable with mechanics pulling wires within our new car.
Read about the long wait for servicing in previous pages. Looks like they need to expand their workshop to cope with the number of new cars being sold, hmm...
I certainly understand cause i also heart pain but do liao.
Sob no turning back. Just let it be
https://www.youtube....h?v=a5fKMTqfki4
�
Replacing the battery in the Mazda Advanced Keyless System key fobWah replacing the battery will make the key fob have full of scratches and dings.
�
https://www.youtube....h?v=a5fKMTqfki4
�
Replacing the battery in the Mazda Advanced Keyless System key fob�
�
107,888. Deluxe soul red. But I have got a good over trade amount on top of my trade in car value to sweeten the deal.�
How much you paid for your deluxe on 7 August? �If you paid much lower than current sales price maybe that's why they bidding low?
�
Anyway, like you said, no hurry for your since your current ride still have 3 years to go, you stand to gain if the COE continue to slide. �I think got chance to hit $50k if the current trend goes on. �
Anw getting the car or not doesn't really matter for me. If don't get I will just move on to another brand. They can forget about any top up from me.
Edited by Hansbaobao, 26 September 2015 - 10:45 PM.
I certainly understand cause i also heart pain but do liao.
Sob no turning back. Just let it be
Yup, fingers crossed no issues with the car so we don't need to visit their service centre too frequently.
I share with you. I bought mine after National Day, few days later than you and I got the Coe on first bidding! Mine is non guaranteed too. If yours short by $500 is it due to your dealer's incompetence? I really hope you get yours soon... Or could it be my Coe is higher than yours... Lots of possible speculation but we will never know
My guess is yours is not red? My shipment coming in Oct hence probably no rush.
Anyway I got a certain level of confidence in this SE. In total my friend and I got 4 cars from him already (including mine). No reason to risk my sales.
107,888. Deluxe soul red. But I have got a good over trade amount on top of my trade in car value to sweeten the deal.
Anw getting the car or not doesn't really matter for me. If don't get I will just move on to another brand. They can forget about any top up from me.
Additional $5k for trading in car? If that is the case, it's really a very good deal.
My guess is yours is not red? My shipment coming in Oct hence probably no rush.
Anyway I got a certain level of confidence in this SE. In total my friend and I got 4 cars from him already (including mine). No reason to risk my sales.
Mine is also red.
Mine is also red.
Anyone did any sound proofing?
Or intend to do it?
The car is damn noisy..especially on uneven road...can feel the debris and hear the sound so clearly...
Mazda need to buck on on sound insulation!
�
I kinda agreed .... if you were to spray high pressure water to the under well of the front tyres, the noise it makes is way louder than the rear tyres.�
You should start there ...�
Just to check with you guys if you have the same feel of the engine being a little jerky while it is stationary, regardless be it in P or D.�
Definitely not the AC cos I turned the AC of and experienced the same. Did not feel it on the test drive vehicle.
�
The reason is that the iSTOP is trying to decide to OFF your engine or not.
�
What you can do are:
1) OFF the iSTOP completely.
2) Release the brake and press down hard again to activate the iSTOP. Be make sure you have enough clearance to do that.
Current promo...
For a limited time only, enjoy a complimentary body kit when you book a Mazda 3 2.0L Sedan or Hatchback!*
Mazda 3 Hatchback:
- From $104,888 (Demo unit).*
- Front lip spoiler.
- Side skirt.
- Lower back diffuser.
- Rear spoiler..
Mazda 3 Sedan:
- From $99,888 (Demo unit)..
Just got my evil M logo... Arrived from aliexpress.. Cheap so I buy it. I have not thought about whether I want to paste it on the car or on my laptop. Just buy first then think about its usefulness later ... Sigh typical me... Still considering if want to put on car cos the Wife prefers the original chrome emblem, says evil M looks cheapo.. Oh well. Some pics below...
�
Different spokes[sic] for different folks, but I think I agree with your wife here.
�
Different spokes[sic] for different folks, but I think I agree with your wife here.
Pruss one
I also bought some white light LEDs and plan to replace the stock yellow lights. The video above shows how it can be done using simple tools.
Nice. How much is the shipping btw?
Can get at Autobacs. Mine is orange in colour and bought like 10 years back.
�
The tool is very useful hor ... i like.�
�
Can get at Autobacs. Mine is orange in colour and bought like 10 years back.
�
�
Thanks bro dcb.�
Nice. How much is the shipping btw?
Free of charge
!!! The 1.88% with which bank? Only available with trade in? I didn't get it lor...
It's with Hong Leong Finance.
It was a promo only during the National Day period.
�
Thanks HUGE.
�
The facebook link is not working.
Anyone tried the mod?
�
you try first?.. hehe
Damn, missed it by 2 weeks
It's with Hong Leong Finance.
It was a promo only during the National Day period.
�
Nice. How much is the shipping btw?
�
�
Hi Esther,
�
Below is the link of the vendor I bought from for your ref. Its $1.27 with free shipping.
�
http://www.aliexpres...=69501349841156
�
Lots of cheap stuff from China available there.
Damn, missed it by 2 weeks
�
�
Don't worry you are not alone. I missed it too. In fact I went to the show room during the promo period as well as after the promo over. I told the SE to match the price of the promo period and I will confirm on the spot. He did.
�
�
Hi Esther,
�
Below is the link of the vendor I bought from for your ref. Its $1.27 with free shipping.
�
http://www.aliexpres...=69501349841156
�
Lots of cheap stuff from China available there.
�
Don't worry you are not alone. I missed it too. In fact I went to the show room during the promo period as well as after the promo over. I told the SE to match the price of the promo period and I will confirm on the spot. He did.
Thanks for the info. i thought you ordered from precision LED. Those tools would be useful.
Thanks for the info. i thought you ordered from precision LED. Those tools would be useful.
�
I ordered the cheap ones from aliexpress. I was thinking after using it, the tools will prob be collecting dust somewhere... If it does not work out I might reconsider ordering from precision�
Wah replacing the battery will make the key fob have full of scratches and dings.
�
�
no, it will not haev scratches and dings unless u do it the wrong way.
�
i removed the battery twice.
0 scratches.
Oooo, seeing the video the key fob is full of scratches.�
�
no, it will not haev scratches and dings unless u do it the wrong way.
�
i removed the battery twice.
0 scratches.
�
no, it will not haev scratches and dings unless u do it the wrong way.
�
i removed the battery twice.
0 scratches.
�
No offense or intention to doubt your worksmanship, but have you shined a light on it to be sure? The video's one can see all the scratches under the flash in the photographs
�
On the subject of the keyfob, I noticed the Japanese makes still tend to make very boring looking key fobs... no design flourishes.
For those who installed car camera on your own (not the Blaupunkt one), do you remove prior to servicing just to be discreet?
�
No offense or intention to doubt your worksmanship, but have you shined a light on it to be sure? The video's one can see all the scratches under the flash in the photographs
�
On the subject of the keyfob, I noticed the Japanese makes still tend to make very boring looking key fobs... no design flourishes.
Haha no worries. If I need to shine on it to see the scratches im probably not worried anyway
I thought the JDM key fobs is quite good now. Wait till you see the Volkwagen's.
On the subject of the keyfob, I noticed the Japanese makes still tend to make very boring looking key fobs... no design flourishes.
�
For those who installed car camera on your own (not the Blaupunkt one), do you remove prior to servicing just to be discreet?
�
Personally, I don't think it will void the warranty. The SE gives out this as freebies. It does not make sense to give freebies which you can install but warranty being voided. But then again, I may be wrong.
For those who installed car camera on your own (not the Blaupunkt one), do you remove prior to servicing just to be discreet?
�
I am using my own car camera, and left it there when I sent it for 1K servicing. No voiding of warranty. However, my car camera was not installed professionally like how some will have it done. My wires are all exposed and I can simply just remove it if I want to.
Anyone collecting car this month?
For those who installed car camera on your own (not the Blaupunkt one), do you remove prior to servicing just to be discreet?
Nope. Just send in together
Hi Guys,�
�
just collected my ride 3 weeks ago.. love the drive so far.... i'm thinking of changing tyres and getting a bigger rim.. read up on the tyre dimensions etc etc but still a noob.. able to advise if the new tyre profile 215/50/17 or 215/55/17 ok ?
I thought the JDM key fobs is quite good now. Wait till you see the Volkwagen's.
�
Well, for example, consider the Mazda's key, it's quite plain except for a satin chrome logo on the back.
�
Then the Harrier's, which is supposed to be a premium car:
�
This is the old key design for Subaru Forester (2015 design is more modern):
�
Current Honda key also very boring...
�
nowadays I see the contis usually design their key something like this
�
Just looks sleeker and somehow less plain. Maybe it's just me being weirdo, since i am weirdo.
Anyone collecting car this month?
�
Hopefully mid Oct =)
�
anyone know where to buy some sliver sticker wrap? want to wrap the side mirrors.
Hi Guys,�
�
just collected my ride 3 weeks ago.. love the drive so far.... i'm thinking of changing tyres and getting a bigger rim.. read up on the tyre dimensions etc etc but still a noob.. able to advise if the new tyre profile 215/50/17 or 215/55/17 ok ?
�
In general if your rim size +1, the diameter will increase, then ratio will drop. eg: 205/60/R16 when going bigger 1 size, will become 215/55/R17
bigger again will be 225/50/R18
Those keys are ugly man.
Which conti make's key is that?
�
I seriously think Mazda's Key fob looks ok.
�
Well, for example, consider the Mazda's key, it's quite plain except for a satin chrome logo on the back.
�
Then the Harrier's, which is supposed to be a premium car:
�
This is the old key design for Subaru Forester (2015 design is more modern):
�
Current Honda key also very boring...
�
nowadays I see the contis usually design their key something like this
�
Just looks sleeker and somehow less plain. Maybe it's just me being weirdo, since i am weirdo.
�
Those keys are ugly man.
Which conti make's key is that?�
I seriously think Mazda's Key fob looks ok.
�
�
I think so too...
�
Hopefully mid Oct =)
�
anyone know where to buy some sliver sticker wrap? want to wrap the side mirrors.
�
Do a search on eBay or Aliexpress...plenty there.
�
Just a caution, those sticker wraps that have gone through 'electroplating' process...ie the chrome, silver, gold ones, whilst very shiny, are not very stretchable, hence maybe quite difficult to stick neatly to the curve surface of the side mirror.
�
or maybe its just me...not skillful enuf...
Edited by ST69, 29 September 2015 - 06:27 PM.
For those who installed car camera on your own (not the Blaupunkt one), do you remove prior to servicing just to be discreet?
�
I believe the warranty issue relates to the battery. If you install camera (or any other after market devices) that connect direct to the battery, the issue is that it kill off the battery prematurely. If you have voltage cut-off device or separate aux power supply, it shd be ok.
�
Hopefully mid Oct =)
�
anyone know where to buy some sliver sticker wrap? want to wrap the side mirrors.
�
When you purchased?
�
Sticker wrap... you looking at these??
http://www.aliexpres...2272541917.html
http://world.tmall.c...uId=64331078016
Those keys are ugly man.
Which conti make's key is that?�
I seriously think Mazda's Key fob looks ok.
�
�
That last one is Peugeot. The other two are Harrier and Subaru Forester (~2014).
�
Mazda one looks ok... just plain
Edited by 7hm, 29 September 2015 - 07:37 PM.
Anyone know if it's illegal to mount the plate at the side in Singapore? Nice hor?
This pic shows how it looks like
�
no. there's no law saying that the number plate has to be at the centre.
�
if there is, every alfa romeo and every land rover discovery would be breaking the law:
�
Anyone know if it's illegal to mount the plate at the side in Singapore? Nice hor?
This pic shows how it looks like
�
fugly to me....haha..
Not forgetting the Evos and Copens.
if there is, every alfa romeo and every land rover discovery would be breaking the law:
�
Anyone know if it's illegal to mount the plate at the side in Singapore? Nice hor?
This pic shows how it looks like
�
Using the tow-hook? But mind you that the front drill-holes can be quite obvious unless you have a black car.
Think if it's below the headlights and the pure horizontal kind will be nicer?Anyone know if it's illegal to mount the plate at the side in Singapore? Nice hor?
This pic shows how it looks like
Think the Mitsubishi Lancer cars are like dat. �
Anyone know if it's illegal to mount the plate at the side in Singapore? Nice hor?
This pic shows how it looks like
�
�
�
Do a search on eBay or Aliexpress...plenty there.
�
Just a caution, those sticker wraps that have gone through 'electroplating' process...ie the chrome, silver, gold ones, whilst very shiny, are not very stretchable, hence maybe quite difficult to stick neatly to the curve surface of the side mirror.
�
or maybe its just me...not skillful enuf...
�
oh, ok.good point to note, will be my first time trying, done it on the b pillars before using the carbon-fibre look-a-like kind of stickers.
Think the Mitsubishi Lancer cars are like dat. �
�
�
�
well its not in the not allowed section. haha.
�
but if you really want to know,
�
The vehicle licence plate shall consist of the index mark and the registration number assigned to the motor vehicle. The index mark and the registration number shall be suffixed with a letter of the alphabet, which serves as the official reference. The vehicle licence plate shall be exhibited at the front and at the back of the motor vehicle not more than one metre from the ground in a vertical position so that every letter or figure of the vehicle licence plate is easily distinguishable. No other figures or letters and no design advertisement or ornamentation shall be placed near the identification mark on the vehicle licence plate in such a manner as to render it more difficult to read or distinguish when the vehicle is in motion.
The vehicle licence plate shall meet the following requirements:
- the letters and figures are 70 mm high, 50 mm wide and 10 mm broad;
- the space between adjoining letters and between adjoining figures shall be 10 mm;
- the space between the letters and figures shall be 20 mm;
- a margin between the nearest part of any letter or figure and the top or bottom of the vehicle licence plate shall be 10 mm; and
- a margin between the nearest part of any letter or figure and the sides of the vehicle licence plate shall be 20 mm.
- Vehicle licence plates are distinguishing marks of identification for registered vehicles on the road. They are important in identifying vehicles for enforcement and emergency activities or other contingent conditions. As such, it is incumbent upon the registered owner and driver to ensure that proper vehicle licence plates are displayed prominently on the front and rear of the vehicle at all times.
If the vehicle licence plate is blocked by a bicycle rack or bicycles or any other fittings such as wedding decorations, motorists are required to hang an additional licence plate on the vehicle.
Vehicle owners whose vehicles are found with improper licence plates face a maximum Court fine of $1,000 or 3 months' imprisonment upon conviction in Court.
�
Attached Files
Hi all, am starting to look closer at the M3. I cannot find any info on accessories from mazda.com.sg. any pointer to where I can find this info before I head down to Leng Kee this weekend?
Hi all, am starting to look closer at the M3. I cannot find any info on accessories from mazda.com.sg. any pointer to where I can find this info before I head down to Leng Kee this weekend?
What accessories are you looking for? Body kits, stickers, internal deco, lights, emblems?
Try here http://www.mazda.co....all-new-mazda3/
Hi all, am starting to look closer at the M3. I cannot find any info on accessories from mazda.com.sg. any pointer to where I can find this info before I head down to Leng Kee this weekend?
�
Got my Mazda3 ordered ~2 weeks ago at price 109,888 (Delux) and got the COE secured in 1st bidding 55,399. SE told me is Sep production, rightfully could collect car at end Oct (if no shipment delay). Would like seek for your advise what important note need to be taken during car collection?
What's included at this price and any freebies from them like drive recorder or other things ?
What's included at this price and any freebies from them like drive recorder or other things ?
They are not included. You need to negotiate. Depends on the SE serving you too...
Welcome. We are all here to share.�
Thanks.
�
�
http://mazda3revolut...-removal-3.html
Not that I confirm will do, just reading up a bit and thought I would like to share what I found.
Anyway eBay sells the relocation bracket that require drilling:
http://www.ebay.com/...a9b04ee&vxp=mtr
Also another one without the need to drill
http://www.ebay.com/...43f8cf2&vxp=mtr
love Japaneese cars
They are not included. You need to negotiate. Depends on the SE serving you too...
SE throw in car camera (think not expensive one but good that they install for me) + solar film + car mate.. not sure what else to ask prior signing... haha..that all.
SE throw in car camera (think not expensive one but good that they install for me) + solar film + car mate.. not sure what else to ask prior signing... haha..that all.
SE throw in car camera (think not expensive one but good that they install for me) + solar film + car mate.. not sure what else to ask prior signing... haha..that all.
Hi, may I ask what is carmate?
Car alarm?
Hi, may I ask what is carmate?
�
Camera should be Blaupunkt.
SE throw in car camera (think not expensive one but good that they install for me) + solar film + car mate.. not sure what else to ask prior signing... haha..that all.
�
Hi, may I ask what is carmate?
Should be car mat.
Thanks for sharing.
My 98k dream car :-).....
�
nice price.
�
more reasonable then a Honda Jazz RS
Thanks for sharing.
I suppose its good enough so long car cam is reliable and image is clear.
�
SE throw in car camera (think not expensive one but good that they install for me) + solar film + car mate.. not sure what else to ask prior signing... haha..that all.
SE throw in car camera (think not expensive one but good that they install for me) + solar film + car mate.. not sure what else to ask prior signing... haha..that all.
�
Waiting for the official answer�
I actually thought he meant the carmate air freshener... Lol
�
�
yours somehow rim look bigger leh.
�
this rim definitely is bigger; tyres low profile. mayb AD replace 16" stock rims with these - spokes also straighter.
�
yours somehow rim look bigger leh.
�
this rim definitely is bigger; tyres low profile. mayb AD replace 16" stock rims with these - spokes also straighter.
�
iirc, those rims stock for mz6
The spokes design seem a bit different but I can't remember if standard have sunroof, so I cannot discern these two immediately.
�
Mazda's rims all look the same... very typical five-twin-spoke design
My SE says 10th oct shipment in, 12th oct clear...do up rikecool and leather seat only? Dunno can get by 17th oct? my birthday.....finger cross!
My SE says 10th oct shipment in, 12th oct clear...do up rikecool and leather seat only? Dunno can get by 17th oct? my birthday.....finger cross!
Wow 10 Oct shipment in, its that affirmative?
Wow 10 Oct shipment in, its that affirmative?
u also same? �
Yup. Just up size 1" only.
Not exactly low profile. Think its 215/50/17
May I ask if SE throw in as freebie or additonal cost?
May I ask if SE throw in as freebie or additonal cost?
Paid from my own pocket....
My purchase price was nit v high so only got 3m mats
Rims bought for 300 pte seller
Did a 1300km trip few weeks back.
Car do feel stable at NSH...top speed done was 160km/hr.
Having driven nissan sunny, honda civic and wrx 2.0. I think mazda 3 not bad already.
Only complain is the bloody road and wind noise...
Không có nhận xét nào:
Đăng nhận xét