mycarforum: 2014 Mazda 3 part 53

I got window tint, car mat and higher trade-in value for my old car (compared to what Hyundai or Kia was willing to offer).

Me2! I got higher trade in for my used car as compared to Mitsubishi and Hyundai.
Plus, i get cash rebate 2k less from selling price, LCD display with gps and rear cam...plus 1 more front cam and window tinting.

I didn't get the car mat though... Sales guy said no more budget. Haha.

Not disputing that A3 is a better built car.

If they are of the same price, I will take A3 no doubts. But it doesnt worth the 30-40% premium in this case.

Is anyone else other than Privacy facing the issue with vibration while vehicle is at red light?

ok. looks like im not alone in experiencing this vibration during idling traffic light...

the issue is that the idling is too low...

�

http://mazda3revolut...brations-5.html

�

will ask for rectification during my 5k servicing..

�

the vibration is annoying...short term solution is to shift to Neutral at every junction..

�

Nice sharing Privacy! I am wondering how low did your rpm goes when your car start vibrating?

Is the vibration not just simply a minor refinement flaw? Every car I've been in has some idle vibration while in D.

Is the vibration not just simply a minor refinement flaw? Every car I've been in has some idle vibration while in D.

I owned subaru, nissan, honda before. Only mazda has vibration like that. Honda also mild vibration due to worn out engine mount but the car is 7yrs old....

My mazda is 2mths + old.......

Is anyone else other than Privacy facing the issue with vibration while vehicle is at red light?

Nice sharing Privacy! I am wondering how low did your rpm goes when your car start vibrating?

What do you meant by vibration when idling?? too low?
Did istop kicks in to cut off power...?
I did experience a engine "churp" sound and slight jerk when istop power up and car moving off...anyone?

ok. looks like im not alone in experiencing this vibration during idling traffic light...
the issue is that the idling is too low...

http://mazda3revolut...brations-5.html

will ask for rectification during my 5k servicing..

the vibration is annoying...short term solution is to shift to Neutral at every junction..

Edited by danzo, 04 November 2015 - 10:50 PM.

Not disputing that A3 is a better built car.

If they are of the same price, I will take A3 no doubts. But it doesnt worth the 30-40% premium in this case.

Based on the price I asked last week, a M3 margin is 19% and A3 is 24%.

�

� Mazda 3 Audi A3 RF 140 140 OMV 15477 27599 ARF � � 1st 20k 15477 20000 balance � 3039.6 GST 1083.39 1931.93 COE 56001 56001 Excise Duty 3095.4 5519.8 CEVS -5000 -10000 Road tax 298 298 Total cost �86,572 �104,529 � � � Sell price 107000 138000 Margin �20,428 �33,471 Pernium �0.19 �0.24

�

Rough figure above.. by the way.. i am a newbie and a noob when it come to car. :)

What do you meant by vibration when idling?? too low?
Did istop kicks in to cut off power...?
I did experience a engine "churp" sound and slight jerk when istop power up and car moving off...anyone?

Mine does that. Its like starting the engine..
Does your istop deactivate itself while the brakes is still being applied?

Is anyone else other than Privacy facing the issue with vibration while vehicle is at red light?

�

Nice sharing Privacy! I am wondering how low did your rpm goes when your car start vibrating?

�

I noticed of this symptom on my car on the day after I collected it. To describe it as a "vibration" is quite forgiving, I feel.

I would describe the symptom as "frequent and irregular sputter", which makes it quite irritating and a pain to tolerate as the driver.�

Had highlighted to Leng Kee Svc Ctr at the 1K servicing, but seemed like nothing was done and if they did, it was not rectified.

Might do my 5K at Ubi and highlight this again.

�

Hopefully there is a solution.

Just installed the door insulator...solid closing of door....wow effect! only $40 DIY.....no regret!

Just installed the door insulator...solid closing of door....wow effect! only $40 DIY.....no regret!

�

got pictures share bo?

got pictures share bo?

tomolo....too dark [laugh]

Just installed the door insulator...solid closing of door....wow effect! only $40 DIY.....no regret!

�

those striker rubber/plastic pad cover?

I did experience a engine "churp" sound and slight jerk when istop power up and car moving off...anyone?

Start engine to have sound after IStop cut off is normal.

I noticed of this symptom on my car on the day after I collected it. To describe it as a "vibration" is quite forgiving, I feel.
I would describe the symptom as "frequent and irregular sputter", which makes it quite irritating and a pain to tolerate as the driver.
Had highlighted to Leng Kee Svc Ctr at the 1K servicing, but seemed like nothing was done and if they did, it was not rectified.
Might do my 5K at Ubi and highlight this again.

Hopefully there is a solution.

Sounds serious!

Perhaps my car still new (less than 2 weeks). While idling, its quiet and can't feel much vibration. If IStop cuts in to cease engine, only can hear aircon wind...

Just installed the door insulator...solid closing of door....wow effect! only $40 DIY.....no regret!

Wow... New DIY mod?

Pls share what is it and where u bought

Here it is!
more picture!

�

Hi, What are the effects of the insulator?

Hi, What are the effects of the insulator?

less wind noise, close door solid,overall solid feel!

Just checking: everyone who has the vibration issue - are you guys driving standard or deluxe model? Or mixture of both?

Both standard and deluxe same engine. I don't think this relate to knocking sound.

Btw I'm driving standard version. No vibration.

Start engine to have sound after IStop cut off is normal.

Car slight jerk when power up and moving off after istop?

Edited by danzo, 05 November 2015 - 08:37 AM.

I noticed of this symptom on my car on the day after I collected it. To describe it as a "vibration" is quite forgiving, I feel.
I would describe the symptom as "frequent and irregular sputter", which makes it quite irritating and a pain to tolerate as the driver.
Had highlighted to Leng Kee Svc Ctr at the 1K servicing, but seemed like nothing was done and if they did, it was not rectified.
Might do my 5K at Ubi and highlight this again.

Hopefully there is a solution.

"Frequent and irregular splutter" while idling?? With istop?

does your SC pickup you up from ur hse to either Lengkee or�ubi to collect ur ride??�

�

cfm oct batch will arrive on 10 nov with�earliest collection date between�20 to 27 nov or later date

Edited by AhKn, 05 November 2015 - 10:41 AM.

Do you know if this is also used to resolve the 'creaking' sound going over humps after rain? Thanks!

�

Early 2014 builds did not have this white rubber spring protector or insulator:

If you don't have those & are experiencing some slow speed clunk upon hitting bumps, the dealership may install you these brownish spring protectors to silence it:
PN:KDY534081
This sits 138mm from the top end & inner side of each front coilspring as insulator against the strutmount.

�

anybody interested in used set of Enkei RPF 1 original rims?

"Frequent and irregular splutter" while idling?? With istop?

with iStop activated (ie engine shut down), all ok. no moving parts except aircon fan mah...

�

On the other hand, regardless of having iStop function turned on or off (but engine is idling), I experience the feel of "sputtering".�

It exists when both aircon is on or off, but I feel it is more prominent and frequent when the ac compressor is running/kick in.

Do you know if this is also used to resolve the 'creaking' sound going over humps after rain? Thanks!

Im not too sure if this was done to mine, but I highlighted it during my 1K service. "Clunk" sound seemed to have been eliminated after that service but of late, it reappeared again. Especially during wet weather and going over humps on down/up slopes. Now at about 4.5K.... any similar observations?

any photo, condition, what size at what price?�

�

anybody interested in used set of Enkei RPF 1 original rims?

�

Do you know if this is also used to resolve the 'creaking' sound going over humps after rain? Thanks!

I know this resolves the slight 'tok' sound upon bumps on low speed & torsional creaks. These are cheap US$3+
http://www.mazdapart.../KDY534081.html

For pillar tick & click sounds, some had better luck w/ adding aftmarket upper strutbar over the Mazda TSB.

any photo, condition, what size at what price?�

u got PM...

Did anyone do ceramic pro package? How much does it cost for mazda 3?

Did anyone do ceramic pro package? How much does it cost for mazda 3?

See which series you are going for. I would say not easy on the wallet.

My SE texted me and told me that if I'm making payment via cheque. is this a norm? Insurance I just need to provide her my cc details over text. tt's it.

�

Any thoughts?

My SE texted me and told me that if I'm making payment via cheque. is this a norm? Insurance I just need to provide her my cc details over text. tt's it.

Any thoughts?

Dont give ur cc details over text... zzzzzz NEVER

Dont give ur cc details over text... zzzzzz NEVER

�

Agree, not so much on the cc over text more of the not meeting... Last time i rem meeting the se to settle balance payments.

I know this resolves the slight 'tok' sound upon bumps on low speed & torsional creaks. These are cheap US$3+
http://www.mazdapart.../KDY534081.html

For pillar tick & click sounds, some had better luck w/ adding aftmarket upper strutbar over the Mazda TSB.

�

I resolved the 'tok' sound over humps as well as the A pillar tick & click sounds.

�

Whats left is the creaking sound when its wet during/after rain, when going through hump.�

�

Anyway, will raise this during the 20k svc. Thanks!!� [thumbsup]

Im not too sure if this was done to mine, but I highlighted it during my 1K service. "Clunk" sound seemed to have been eliminated after that service but of late, it reappeared again. Especially during wet weather and going over humps on down/up slopes. Now at about 4.5K.... any similar observations?

�

Yes, the clunk sound resolved by AD.

�

Now, I experience the wet weather creaking sound over humps.�

I observed that the car is using "very high FC like 20-40L/100KM" on the info screen for some time, whenever it pickup speed at low rev, e.g. at traffic lights or bumps/turns....

So far, my first tank only manage about 500KM... or average 8.1L/100KM on info.

Does this improve? anyone getting near the stated 5.7L/100KM ?

Edited by danzo, 05 November 2015 - 12:31 PM.

I observed that the car is using very high FC like 20-40L/100KM on the info screen, whenever it pickup speed at low rev, e.g. at traffic lights or bumps/turns....

So far, my first tank only manage about 500KM... or average 8.1KM/100KM on info.

Does this improve? anyone getting near the stated 5.7KM/100KM ?

�

Largely depends on travel routes.

�

I clocked almost 20k, ave FC is 7.7l / 100km, mainly city driving, about 90%.

Car slight jerk when power up and moving off after istop?

Slight jerk when engine crank is normal.
But when moving off won't jerk.

I observed that the car is using "very high FC like 20-40L/100KM" on the info screen for some time, whenever it pickup speed at low rev, e.g. at traffic lights or bumps/turns....
So far, my first tank only manage about 500KM... or average 8.1L/100KM on info.
Does this improve? anyone getting near the stated 5.7L/100KM ?

That's why city driving will have high FC.

Trust me, if u pump full tank at Petronas 2nd Link, drive to Melaka and loop back to Sin, drive at cruising speed of 100-110, I'm confident you will be a FC or below 6, or even lower!

Seriously don't worry and compare your FC with other M3 owners. Different driving stype, different route, different load, different setup... All these contribute to FC. Just enjoy the ride!

anyone getting near the stated 5.7L/100KM ?

Forgot to reply u on this - this morning after i pump petrol, i go straight to expressway... When i reach my destination and park my car, my avg FC is 5.4l/100km!

Got a call from the SE, car has arrived...

�

Seems like the shipment that was supposed to come later this month had arrived early....

Largely depends on travel routes.

I clocked almost 20k, ave FC is 7.7l / 100km, mainly city driving, about 90%.

With 90% city driving and start stop conditions you still managed to get about 13km per litre?

Do you consciously step gently on the pedal or maintain higher air con etc?

With 90% city driving and start stop conditions you still managed to get about 13km per litre?

Do you consciously step gently on the pedal or maintain higher air con etc?

�

I can believe that. �I drive at least 60-70% city driving. �If I drive the car hard, I get about 12.8 km/l. �If I drive it gently, I get about 13.8 km/l. �I am quite amazed that it is so fuel efficient. �

I can believe that. I drive at least 60-70% city driving. If I drive the car hard, I get about 12.8 km/l. If I drive it gently, I get about 13.8 km/l. I am quite amazed that it is so fuel efficient.

Hmmmmmm

Drive gently or hard only 1km difference.

This must be the most wackable car. Dun do it, wasted.

Update on my vibration issue.

The vibration can only be felt when
1. I stop is off.
2. Braking while at D, at traffic light.

Solutions to my irritation:
1) apply 1/2 brake with I stop switched on.
No more vibration.

But its a stop gap measure.

On FC issue. I travelled frm 2nd link petrol station with full tank to ipoh toll and my balance range is 130km! Means I can do 730+km on a full tank 100% NSH, 110km-150km/hr.

When you said I stop is off, do you mean it is activated and engine is off? Or you mean you have switched off I stop feature�and while stopping with D, you can feel the vibration (what RPM was your engine at)?

�

Update on my vibration issue.

The vibration can only be felt when
1. I stop is off.
2. Braking while at D, at traffic light.

Solutions to my irritation:
1) apply 1/2 brake with I stop switched on.
No more vibration.

But its a stop gap measure.

On FC issue. I travelled frm 2nd link petrol station with full tank to ipoh toll and my balance range is 130km! Means I can do 730+km on a full tank 100% NSH, 110km-150km/hr.

�

When you said I stop is off, do you mean it is activated and engine is off? Or you mean you have switched off I stop feature�and while stopping with D, you can feel the vibration (what RPM was your engine at)?

�

i stop off = switch off ( i thought its pretty clear?).

obviously if engine is off = no vibration.. Zzzzzzzzzzzzzzz

rpm flucuates btw 500 to 700..

vibration at 500rpm...

�

Edited by Privacy, 05 November 2015 - 07:43 PM.

Mine also 2 weeks. I collect on 23/10. But low mileage of below 600km.

Btw, the FC avg readings is quite accurate as compared to a manual calculation. You tried doing a manual calculation using the distance travelled divide by petrol pumped?

I didn't do any manual calculation haha. That was based on what is displayed by thr car.

i stop off = switch off ( i thought its pretty clear?).

obviously if engine is off = no vibration.. Zzzzzzzzzzzzzzz

rpm flucuates btw 500 to 700..

vibration at 500rpm...

�

�

LOL please pardon me... tml collecting car too excited can't think properly. :/

Edited by Madtari, 05 November 2015 - 08:30 PM.

LOL please pardon me... tml collecting car too excited can't think properly. :/

�

congrats!

you can try it tomorrow...

off the i-stop and use ur brake to hold the car while gear in D at traffic lights...

�

im pretty sure im not the only one...it vibrates and rattles like those cheapo china made hand massager.

Hi guys, can I check if the hud can be turn off? Saw a few m3 with the hud up,but did not see the display, wondering if the owner switch the display off?

I didn't do any manual calculation haha. That is based on what was displayed in the car.

This just came in my mail.. Yeah! Twice the happiness.. The carbon fibre emblem to cover the holes after the license plate relocate. And the red rings around the car knobs

Attached Thumbnails

This just came in my mail.. Yeah! Twice the happiness.. The carbon fibre emblem to cover the holes after the license plate relocate. And the red rings around the car knobs

Order xtra sell me leh.....waahhh....

Order xtra sell me leh.....waahhh....

I did not order extra... Next time I ordering online I pm you...

I did not order extra... Next time I ordering online I pm you...

Ok..thks!

i stop off = switch off ( i thought its pretty clear?).
obviously if engine is off = no vibration.. Zzzzzzzzzzzzzzz
rpm flucuates btw 500 to 700..
vibration at 500rpm...

Bro. I just tried and my car rpm did not drop to 500rpm. U may want to hightlight this during next servicing for them to tune the rpm higher.

Bro. I just tried and my car rpm did not drop to 500rpm. U may want to hightlight this during next servicing for them to tune the rpm higher.

�

i will..

see if a reflash of ECU helps....

I just got my M3 deluxe 6day , tyre is very noise. Anyone also got is problem.

I just got my M3 deluxe 6day , tyre is very noise. Anyone also got is problem.

Part of SkyActiv's strengths is lightening. It has very minimal sound deadening, & thinner but stiffer sheetmetal than ever before. You get better FC, but the trade-off is road noise.

Edited by minsanity, 06 November 2015 - 12:37 AM.

Is there a reason why you turn the I Stop off?

Hello fellow people!

Received my car last Friday and loving every inch of it!

While washing my car today, found a dent on my front passenger fender and the paint has chipped off... Probably caused by a lorry or something with their pointy door swang outwards with a huge force.. causing a ugly dent and hole in the paintworks.

Any kind soul can advise is there any possible remedy to this has caused a huge distress to me. 5th day of driving and already kena this type of inconsiderate people...

Btw color is titanium Mica. Will be great if anyone can shed some light into AD repairing/replacing or other workshop that provide similar services. Your help will be greatly appreciated!

Thanks all for taking time to read my sorrows! haha... zoom zoom~

I had the same problem, AD quote me $450 for the little chip off. If you wanna cover it with new paint, I suggest you go to a reliable paint shop for a respray at around $150+/-. As for mine the chip off is still there. The dent was rework by suction or roll, aka paint less dent repair. One dent for $20-25.

Here it is!
more picture!

can share where did you bought the seal? How many req to cover the 4 dr?

Do you know if this is also used to resolve the 'creaking' sound going over humps after rain? Thanks!

Those 2014 batch have this problem, i believe they had solve this problem. Till now no complain from any forumer ..

I just got my M3 deluxe 6day , tyre is very noise. Anyone also got is problem.

What tyres your car comes with? Has it run-in?
I find is mainly the louder engine sound when rev after stopping... otherwise its no diff from other cars I sat in...and even quieter after it runs in...

Edited by danzo, 06 November 2015 - 09:16 AM.

I observed that the car is using "very high FC like 20-40L/100KM" on the info screen for some time, whenever it pickup speed at low rev, e.g. at traffic lights or bumps/turns....

So far, my first tank only manage about 500KM... or average 8.1L/100KM on info.

Does this improve? anyone getting near the stated 5.7L/100KM ?

�

i'd like to share my FC findings so far.. 1st tank 530km.. 2nd tank 580km.. 3rd tank 620km. 4th tank 650km.. 5th tank onwards 660km to 680km all with 42L of 95 petrol.. i tried 98 petrol once in awhile and it improvement is negligible. +1 or 2% at most.. but car is def more responsive.. i'm currently at 5k mileage and my current average is 6.1L/100KM based on 40% city and 60% highway driving.

�

The car sucks petrol at low gear.. especially during takeoff when at full stop. or during pick up.. one way to counter that is to accelerate moderately and let it shift to 3rd or 4th gear and subsequently apply cruising.

�

FYI i changed rims to 17" at the 4th tank.. its lighter than stock rims therefore the improvement in FC.. �

Hi guys, can I check if the hud can be turn off? Saw a few m3 with the hud up,but did not see the display, wondering if the owner switch the display off?

Yap. I saw in manual that both the lcd and hud display on screen can be switched off..
Also you cant see the hud display except from the driver seat.

Edited by danzo, 06 November 2015 - 09:28 AM.

my car come with toyo tyre , how long for run in ? Now just 250km , bro Danzo you also got is problem? I can't tahan the noise

my car come with toyo tyre , how long for run in ? Now just 250km , bro Danzo you also got is problem? I can't tahan the noise

Can you describe how to discern the tyres noise...

I did not notice tyre noise... but mazda engine is known to be a tad louder when u ramp up... but when cruising its very quiet...
For tyre run-in, abt 500KM...

Edited by danzo, 06 November 2015 - 09:40 AM.

Now at 500+km, i find road noise is getting abit lesser. as compared to last week when the tyres were new.

pumping 250 for the tyre pressure.

can share where did you bought the seal? How many req to cover the 4 dr?

Those 2014 batch have this problem, i believe they had solve this problem. Till now no complain from any forumer ..

�

Somehow, for my case, its ok when dry, but only during or after rain, the creaking sound appears when going over hump. Its different from the clanging sound when dry.

�

Anyhow, will get AD to resolve this. Thanks!�

Anyone know how to show the red lights camera warnings etc info when in the navigation??

After reading thru past posts on 17" rims, it seem like it really work for FC improvement & others reasons.

�

I decided to�go for 17"�for better FC and information shared from bro Axela525.

�

Can kind heart bros share with me�which tire shop is recommended for�reasonable price, knowledgeable to give good advise.�

�

Btw, may I know what is the estimated trade-in value for 16" stock rims, would say mileage less than 500km or so?

�

thank in advance...:)

Can I check with everyone here: Was your car registered earlier than the day you collected it?

Can I check with everyone here: Was your car registered earlier than the day you collected it?

Yes, 2 days earlier.

Somehow, for my case, its ok when dry, but only during or after rain, the creaking sound appears when going over hump. Its different from the clanging sound when dry.

Anyhow, will get AD to resolve this. Thanks!

Might be your stabilty control & ABS at work? Check your tire pressure for uniformity, too. The system can produce odd sounds compensating for rotational variances.

congrats!

you can try it tomorrow...

off the i-stop and use ur brake to hold the car while gear in D at traffic lights...

�

im pretty sure im not the only one...it vibrates and rattles like those cheapo china made hand massager.

Release slightly the brake and step firmly again.

Anyone knows the weight of the 16" stock rims?

Please advise. Thank you.

After reading thru past posts on 17" rims, it seem like it really work for FC improvement & others reasons.

what brand of 17"rims did you buy?
Pic please� [thumbsup]

I owned subaru, nissan, honda before. Only mazda has vibration like that. Honda also mild vibration due to worn out engine mount but the car is 7yrs old....

My mazda is 2mths + old.......

light off the brake lightly and brake firmly again.

Somehow, for my case, its ok when dry, but only during or after rain, the creaking sound appears when going over hump. Its different from the clanging sound when dry.

�

Anyhow, will get AD to resolve this. Thanks!�

�

Same with me :)

Now at 500+km, i find road noise is getting abit lesser. as compared to last week when the tyres were new.

pumping 250 for the tyre pressure.

�

specs is 36 psi min i think.

I had the same problem, AD quote me $450 for the little chip off. If you wanna cover it with new paint, I suggest you go to a reliable paint shop for a respray at around $150+/-. As for mine the chip off is still there. The dent was rework by suction or roll, aka paint less dent repair. One dent for $20-25.

$450 is daylight robbery. That's why on Singapore roads lots of owners drive around with dents, scratches etc. Its too costly to repair and after awhile we learn to live with it...

Can I check with everyone here: Was your car registered earlier than the day you collected it?

�

I know some friends who have a gap of 4 to 5 working days

Enkei RPF 1

�

Release slightly the brake and step firmly again.

Anyone knows the weight of the 16" stock rims?

Please advise. Thank you.

what brand of 17"rims did you buy?
Pic please�

light off the brake lightly and brake firmly again.

�

Somehow, for my case, its ok when dry, but only during or after rain, the creaking sound appears when going over hump. Its different from the clanging sound when dry.

Anyhow, will get AD to resolve this. Thanks!

Mine have the same problem too. It will happen when you drive over a puddle of water, than you go over a hump. The cracking sound will be heard. But this problem of mine have been resolved. It's has been almost 10k now. Hopefully it's stay that way . Mine was fix in Ubi. Rework on the insulator and arms bushing.

$450 is daylight robbery. That's why on Singapore roads lots of owners drive around with dents, scratches etc. Its too costly to repair and after awhile we learn to live with it...

�

I know some friends who have a gap of 4 to 5 working days

�

Do you know why the gap is so long?

Enkei RPF 1

�

Original or replica?�

How much each?

Any idea the original 16"rim weigh how much?

Mine have the same problem too. It will happen when you drive over a puddle of water, than you go over a hump. The cracking sound will be heard. But this problem of mine have been resolved. It's has been almost 10k now. Hopefully it's stay that way . Mine was fix in Ubi. Rework on the insulator and arms bushing.

�

Thanks for the info. Will remember this when I go for svc, re insulator & arms bushing... [thumbsup]

Might be your stabilty control & ABS at work? Check your tire pressure for uniformity, too. The system can produce odd sounds compensating for rotational variances.

�

Unlikely. Anyway, looks like Ahxiu40 has managed to get his fixed by AD. Thanks!

http://wheels.jaxtyr...id=53941&dim=17

�

great site to see what kind of rims suits ur mazda 3...visually~

12190891_10207954872888055_2779743692467

Send my car for 1st servicing...1 hr job done....kena con job thought this is free but must pay $31 !!

Edited by Axela525, 06 November 2015 - 05:39 PM.

Send my car for 1st servicing...1 hr job done....kena con job thought this is free but must pay $31 !!

�

What's that for? $31 sounds expensive for this bottle. Can choose not to buy?

What's that for? $31 sounds expensive for this bottle. Can choose not to buy?

He says put into petrol tank cleans piston rings and improve FC....i thought it's free!

He says put into petrol tank cleans piston rings and improve FC....i thought it's free!

�

What mileage have you clocked that you will need to clean the piston rings?

I had the same problem, AD quote me $450 for the little chip off. If you wanna cover it with new paint, I suggest you go to a reliable paint shop for a respray at around $150+/-. As for mine the chip off is still there. The dent was rework by suction or roll, aka paint less dent repair. One dent for $20-25.

�

Thanks for responding to my despair! haha,.. Anyone can kindly Pm me somewhere that can fix the dent. your help will be greatly appreciated! it's an eyesore every morning i look at it� [bounce1] �

�

Forgive me for the lack of information and picture!

What mileage have you clocked that you will need to clean the piston rings?

1 k servicing lor!

Thanks for responding to my despair! haha,.. Anyone can kindly Pm me somewhere that can fix the dent. your help will be greatly appreciated! it's an eyesore every morning i look at it� �

�

Forgive me for the lack of information and picture!

Post a pic here...we can advice u better!

Post a pic here...we can advice u better!

�

DSC_0782.jpg

DSC_0780.jpg

http://www.pdr.com.sg/

Try the shop, they will advice u further if cannot do... [;)]

I went for 1K servicing last week and was asked if I wanted to have this "deposit cleaner" at $31 too.

Took 3 hours at Leng Kee.�

Send my car for 1st servicing...1 hr job done....kena con job thought this is free but must pay $31 !!

�

I went for 1K servicing last week and was asked if I wanted to have this "deposit cleaner" at $31 too.

Took 3 hours at Leng Kee.�

Did u take it? i thought it's free.....so I take it....mine 1 hr job!

I went for 1K servicing last week and was asked if I wanted to have this "deposit cleaner" at $31 too.
Took 3 hours at Leng Kee.

You have to add that yourself? Dont they do that at each 10k servicing? Thats the recommended interval to use according to mazda japan site...

http://www.pdr.com.sg/

Try the shop, they will advice u further if cannot do...

Okay thanks man!!!

The guy told me its needed at 1k and 10K...so I took it. I also thought its free but guy explained that servicing doesn't include this "deposit cleaner". Haiz......expensive for a small bottle. Anyway, surprised that yours only 1 hour. I sent in at 9am and they called me at noon to say my car is ready. Did you service at Leng Kee or Ubi?

Did u take it? i thought it's free.....so I take it....mine 1 hr job!

�

Okay thanks man!!!

boss is william...i regular there...

mycarforum

Thứ Hai, 28 tháng 11, 2016

2014 Mazda 3 part 53

Attached Thumbnails

Không có nhận xét nào:

Đăng nhận xét