mycarforum: 2014 Mazda 3 part 84

Every time you step on the accelerator or brake, it will disengage the cruise control. To re-engage at the speed before you cancel, you have to accelerate again and press the up/set button like bro dcb had pointed out.

Thanks alot for this important info!!

haha, 7000km in already still same fc..

25% hw usually 30% is very heavy traffic

i guess it explains alot, find myself accelerating around 2.4-2.7k rpm for gears 1-2 then 2.3-2.5 for gears 3/4 then usually smoother out to cruising rpm before have to brake shortly due to city driving....

For those who get better fc... They keep their rpm to below 2k... In short, drive like guniang.

I have a mazda 3 almost new boot organiser for the hatch back to go. drop me a pm with your contact number to get back to you. Going for $120 fixed C&C. First come first serve. I can't use it as my child baby seat cant fit in the boot when i need it so it is siting at home most of the time. This is an original mazda part from US.

�

http://www.amazon.co... boot organizer

Actually if keep rpm below 2K before the last gear will consume more petrol. The gears will not up shift as fast as normal driving.

For those who get better fc... They keep their rpm to below 2k... In short, drive like guniang.

Never leave the bare metal exposed, at least do a diy touch up is better.
Lol! ... And open shop again once more poison from the forum hahaha

Oh does it look like metal exposed? Diy touch up? - Whats best to use?

Edited by danzo, 24 January 2016 - 06:37 PM.

So what shld be the correct way, change gear at are 2.2k rpm. Light footer, better FC

Actually if keep rpm below 2K before the last gear will consume more petrol. The gears will not up shift as fast as normal driving.

So what shld be the correct way, change gear at are 2.2k rpm. Light footer, better FC

Reach crusing speed (90km/h) asap

Peak hour hard to reach 90km/h on city or highway

Reach crusing speed (90km/h) asap

Cruising speed is now 90? Not 80 ma?

Edited by Runforyourlife, 24 January 2016 - 07:02 PM.

Peak hour hard to reach 90km/h on city or highway

Then no choice but try and not drag your gears at the lower speed. It actually consumes more petrol.

Cruising speed is now 90? Not 80 ma?

Haha since when it is 80?

Impossible to cruise at 90 during peak hours at highway bro. Lol. City even worse, impossible to do that at anytime hahaha

The kpe there 90 need to shift back to 80 when approaching cameras hahaa

Edited by Runforyourlife, 24 January 2016 - 07:53 PM.

�

Hi.....

�

Wonder does it fit into all Mazda steering wheels ?

�

I would like to add colours to my steering wheel. I am driving a Biante.

�

Thanks...

Hi.....

�

Wonder does it fit into all Mazda steering wheels ?

�

I would like to add colours to my steering wheel. I am driving a Biante.

�

Thanks...

Should be the same.... [:p]

For those who get better fc... They keep their rpm to below 2k... In short, drive like guniang.

Actually, even drive below 2k rpm or "kuniang" like u describe will not get below 7L/100km in mostly city driving. It's actually how much highway u travel lor. I am one of those very much highway but do not keep below 2k rpm but got 6L+/100KM one.

Oh does it look like metal exposed? Diy touch up? - Whats best to use?

Some of the bros here bought the soul red touch up paint. Just use this to touch up, at least cover the exposed better than let it expose.

Here's the long waited pics of my babe....

Nice white ang mo babe! Same as mine. I like!!! Hahahhaaaa

Hi, can I check with you guys roughly how long do your I-stop stops for? Mine usually restart after 10 to 15 seconds irregardless of whether I release the break or not. Not sure if this is normal? Thanks

Hi, can I check with you guys roughly how long do your I-stop stops for? Mine usually restart after 10 to 15 seconds irregardless of whether I release the break or not. Not sure if this is normal? Thanks

Perhaps you did not stay on the brake hard enough??
Some traffic red lights can be as long as 3 mins and istop stays until i release the brake...unless you just started and engine had not warm up yet...

Edited by danzo, 24 January 2016 - 10:32 PM.

Different size, steering wheel e,blew have another part number and It's much smaller.

Hi.....

Wonder does it fit into all Mazda steering wheels ?

I would like to add colours to my steering wheel. I am driving a Biante.

Thanks...

If impossible to cruise a 90km/h then cruise at the maximum speed you can get to within the shortest time possible.

Impossible to cruise at 90 during peak hours at highway bro. Lol. City even worse, impossible to do that at anytime hahaha

The kpe there 90 need to shift back to 80 when approaching cameras hahaa

Edited by dcb, 24 January 2016 - 10:15 PM.

Some of the bros here bought the soul red touch up paint. Just use this to touch up, at least cover the exposed better than let it expose.
Nice white ang mo babe! Same as mine. I like!!! Hahahhaaaa

Same same

Sien. I will go for the Mz3 2.0L Sports if it's like this. Should have waited a couple of months.

BTW, does anyone know where to buy plasti dip spray? Seen some DIY videos online on plasti dip emblems. Looks quite do-able.

Plasti dip can buy from qoo10. I buy from 1 seller who deliver the next working day. Very fast.
Painting is easy. But masking the area around before painting takes a long time.

Tried my hands on dipping. Feel it's better to let the pros do it. Had re-do and re-do till I gave up.

Plasti dip can buy from qoo10. I buy from 1 seller who deliver the next working day. Very fast.
Painting is easy. But masking the area around before painting takes a long time.

�

Thanks bruh. Those youtube videos make it look so easy...

Tried my hands on dipping. Feel it's better to let the pros do it. Had re-do and re-do till I gave up.

�

So, just wondering, like to plasti dip the front emblem, how much will a shop charge? Like jdm? Agaration price.

Perhaps you did not stay on the brake hard enough??
Some traffic red lights can be as long as 3 mins and istop stays until i release the brake...unless you just started and engine had not warm up yet...

�

I've got this issue too. I didn't release the brakes. When I went to maintenance page, the iEloop page, it shows "NOT READY". And usually one of the three icons isn't highlighted. It's usually the battery icon.

�

How guys? I am trying to plant a tree here!!

Introduced a place to Ken, $15 for front or rear emblem.

So, just wondering, like to plasti dip the front emblem, how much will a shop charge? Like jdm? Agaration price!!

Introduced a place to Ken, $15 for front or rear emblem.

Where ah?

�

What about the huge chrome at the front grille?

DYC pit stop. Chrome grill at $80 with glossifier

Where ah?

What about the huge chrome at the front grille?

DYC pit stop. Chrome grill at $80 with glossifier

Thanks my man!

Every time you step on the accelerator or brake, it will disengage the cruise control. To re-engage at the speed before you cancel, you have to accelerate again and press the up/set button like bro dcb had pointed out.

�

You could also press the "Res" button which would resume cruise control. The car will then accelerate automatically to the last-set speed limit.

You could also press the "Res" button which would resume cruise control. The car will then accelerate automatically to the last-set speed limit.

That is nice too!

Ya, like what dcb bros say, let the pro do it.

�

see below finished products

�

Back Mazda emblem...

Thanks my man!

�

Hi, can I check with you guys roughly how long do your I-stop stops for? Mine usually restart after 10 to 15 seconds irregardless of whether I release the break or not. Not sure if this is normal? Thanks

If capacitor is fully charged, 2 mins max.

Ya, like what dcb bros say, let the pro do it.

�

see below finished products

�

Back Mazda emblem...

�

Haha don't mind if you have a twin in town eh? Mine's also soul red.

�

How long did they take to do these? Did you call to book first?

Impossible to cruise at 90 during peak hours at highway bro. Lol. City even worse, impossible to do that at anytime hahaha

The kpe there 90 need to shift back to 80 when approaching cameras hahaa

I think the point is to get to the 6th gear as quickly as possible, as the higher the gear the more efficient it is.

but to the uninformed, its abt driving like a kuniang. Fc for sure worse if kuniang nvr have a chance to reach most efficient gear.

I think the point is to get to the 6th gear as quickly as possible, as the higher the gear the more efficient it is.

but to the uninformed, its abt driving like a kuniang. Fc for sure worse if kuniang nvr have a chance to reach most efficient gear.

�

Thanks bro and bro dcb *(as usual still cannot praise u, :s).

Exactly.

I think the point is to get to the 6th gear as quickly as possible, as the higher the gear the more efficient it is.

but to the uninformed, its abt driving like a kuniang. Fc for sure worse if kuniang nvr have a chance to reach most efficient gear.

�

Its all ok bro. We are here to share and learn from each other. [thumbsup] � [wave]

Thanks bro and bro dcb *(as usual still cannot praise u, :s).

�

Different size, steering wheel e,blew have another part number and It's much smaller.

If impossible to cruise a 90km/h then cruise at the maximum speed you can get to within the shortest time possible.

�

Thanks...

�

Saw your post with the web site. All in Japanese words ... :a-m1524:

�

Catch no balls ... :XD: ��

Haha same here so i got a friend to buy on my behalf and send to me in SG.

�

Basically its the front and rear mazda emblem CF sticker, Steering wheel mazda emblem sticker, Steering wheel stick like mine, A, B and C pillar exterior stickers, gear console, door control panel etc etc. Choice of red, blue, a few shades of grey, pink and black colored cf stickers.

�

Here you go for BYEFP rides

�

http://www.hasepro.c...ategory_id=2330

�

Here's mine

�

Thanks...

�

Saw your post with the web site. All in Japanese words ...

�

Catch no balls ... ��

�

Edited by dcb, 25 January 2016 - 10:08 AM.

You should check for Biante in the website or compare with the 2014 Mazda 3 steering emblem size. Have not seen a Biante up close and personal, sorry.

Hi.....

�

Wonder does it fit into all Mazda steering wheels ?

�

I would like to add colours to my steering wheel. I am driving a Biante.

�

Thanks...

�

Edited by dcb, 25 January 2016 - 10:15 AM.

why do I mind and we can meet to have a photo shot too...:)

�

Pls call to make apt and it take at least 2 hrs to complete

Haha don't mind if you have a twin in town eh? Mine's also soul red.

�

How long did they take to do these? Did you call to book first?

�

Base on my own experience, He is correct. But AD will always want you to claim your insurance first. So they can start work immediately. But if you do so, and the old guy didn't report, in the end you will be claiming your own insurance. Which means NCD might be affected. My advice is if your car can move, let the old uncle insurance surveyor come down inspect your vehicle agree on the work and liability they gonna pay than you start your repair. If not you will become a cash cow for Both AD and insurance company.

Side note: my colleague car side folding mirror got broken into 2 at carpark. And Lucky he saw the culprit. But the culprit boss did not report to insurance , in the end , 2.5 yrs later the workshop called say cannot claim. Demand him to pay up and issue lawyer letter.

�

Hi Ahxiu40,

�

AD gave me 2 options. Either proceed with own insurance or wait for the surveyor to inspect.

Of course there is no chance i will claim my own insurance. �

Immediately after the accident, i hoped you filed the case to your insurer.

If u had done that, and uncle did not, this is what happen:
1, AD will most likely do 3rd party claim. As what mentioned by other bros, this will ensure they can get money back from your insurer.
2, Assuming u have proof u r winning the case, your insurer will file a case to the uncle's insurer. If uncle never report the accident, good luck to him. He will have to pay for the repair.

About point 2, I'm not sure will your insurer get a lawyer to claim from uncle. Else u will have to get your lawyer then. From my experience, if your car is sent to outside workahop to repair, they will engage lawyer to get the money back from uncle, or his insurer.

Anyway, good luck.

�

Hi EddHooi,

�

Yes I did.. File a report the following day. I believe I have an upper hand in this situation.

Voice record caught him saying "ALL EXPENSES WILL BE BOURNE BY ME".

But I just cant get over the fact he disconnected him phone line. I doubt he file a report to his insurance.

�

Just to be clear, lets say the 3rd party claim goes through, I am still have to fork out the excess right?

Hi Ahxiu40,

AD gave me 2 options. Either proceed with own insurance or wait for the surveyor to inspect.
Of course there is no chance i will claim my own insurance.

Hi EddHooi,

Yes I did.. File a report the following day. I believe I have an upper hand in this situation.
Voice record caught him saying "ALL EXPENSES WILL BE BOURNE BY ME".
But I just cant get over the fact he disconnected him phone line. I doubt he file a report to his insurance.

Just to be clear, lets say the 3rd party claim goes through, I am still have to fork out the excess right?

You gotto make your choice clearly. Which will not impact your NCD. You are not going to claiming your own insurance thus have no excess and your AIG will not be involved. After the 3rd party insurance guy check your car, you will be offered the liability for the repair. Maybe 80-20, 90-10 or 100 percent. And you should fight or negotiations with the insurance for 100 percent his fault. If 80-20, means you have to pay 20percent of the total repair. This 20 percent you cannot claim from your insurance company. They might force you to a corner stand firm on their offer and resulting to engage lawyer ( if the workshop or in this case AD dun provide) and you had to pay your own lawyer fee.
Side note; my workshop ballon the price of the repair and cover my 20percent. And claim lost of use for 3 days. Dun know AD do this anot. Maybe you wait for the surveyor to conclude the liability, if 80-20 or better and bill size is too huge to swallow than as your own insurace to come in with the liability in your favor. Wish you all the best.

80-20 or 90-10 (lower is you) your insurance NCD will not be affected . But will result in premium increase. If premium increase can always switch company. It's not always bad to claim your own insurance , the only problem is you cannot control the liability if you claim your own insurance. Both company hump hump negotiations 70-30. Than you lost your NCD.

Edited by Ahxiu40, 25 January 2016 - 12:30 PM.

DYC pit stop. Chrome grill at $80 with glossifier

�

Alamak, kana quoted a lot more than what you mentioned ler.

�

Nvm lah, I'll stick with chrome for a while.

talk to him again as I did it last sat and shown him my finished photo.

Alamak, kana quoted a lot more than what you mentioned ler.

�

Nvm lah, I'll stick with chrome for a while.

�

I have a mazda 3 almost new boot organiser for the hatch back to go. drop me a pm with your contact number to get back to you. Going for $120 fixed C&C. First come first serve. I can't use it as my child baby seat cant fit in the boot when i need it so it is siting at home most of the time. This is an original mazda part from US.

�

http://www.amazon.co... boot organizer

�

I take this is explicitly designed for the Mazda3 hatch and won't fit anything else... which is a shame, because that looks really neat.

I tried finding mazda 3 sedan boot organiser cant seem to find any lei :s

I tried finding mazda 3 sedan boot organiser cant seem to find any lei :s

�

Same here :(

�

Bros, if anyone does find something, pls let us know.

�

Arigato in advance

Alamak, kana quoted a lot more than what you mentioned ler.

Nvm lah, I'll stick with chrome for a while.

Bro, very sorry but just learnt it's a promo price for me and Ken

Where ah?

�

What about the huge chrome at the front grille?

1 bottle of the plasti dip cost ard $20, if you lucky, 1 bottle is enough for the front, back Mazda logo, front grille and the 2 fog lights.

But if you wanna play safe, buy 2 bottles. I practise on the back logo first, redo 3 times to get it right then got confident to do the rest. I took 2.5 hours to do all the parts above. 3 hours will be just nice to let the paint dry longer.

Guys, other than design stuff, what are the essential differences between HB and Sedan?

�

1) HB doesn't have the unlock boot button on its remote fob

2) HB has a heavier kerb weight

3) HB has a higher OMV

4) HB backseat feels more spacious due to more headroom.

HB more sporty than Sedan that what I like

Guys, other than design stuff, what are the essential differences between HB and Sedan?

�

1) HB doesn't have the unlock boot button on its remote fob

2) HB has a heavier kerb weight

3) HB has a higher OMV

4) HB backseat feels more spacious due to more headroom.

�

Bro, personal preference aside lol.

care to share ur�finished product

1 bottle of the plasti dip cost ard $20, if you lucky, 1 bottle is enough for the front, back Mazda logo, front grille and the 2 fog lights.

But if you wanna play safe, buy 2 bottles. I practise on the back logo first, redo 3 times to get it right then got confident to do the rest. I took 2.5 hours to do all the parts above. 3 hours will be just nice to let the paint dry longer.

�

Edited by Ken-sanki, 25 January 2016 - 04:08 PM.

Bro, personal preference aside lol.

I think the radio antenna for sedan is the normal type, while the HB one is the 'shark' type.

I think the radio antenna for sedan is the normal type, while the HB one is the 'shark' type.

�

Ah yes that one too... Supposed shark one got "better reception"?

�

Guess that's about it bro? Hmmm... Wonder how is the suspension like for the pigu of HB since its heavier...

Edited by Runforyourlife, 25 January 2016 - 05:03 PM.

Haha same here so i got a friend to buy on my behalf and send to me in SG.

�

Basically its the front and rear mazda emblem CF sticker, Steering wheel mazda emblem sticker, Steering wheel stick like mine, A, B and C pillar exterior stickers, gear console, door control panel etc etc. Choice of red, blue, a few shades of grey, pink and black colored cf stickers.

�

Here you go for BYEFP rides

�

http://www.hasepro.c...ategory_id=2330

�

Here's mine

�

�

�

�

�

�

Whose ride is this? It's a Mazda 2? I thought the Mazda 3 standard doesn't come with cruise control?
�

Whose ride is this? It's a Mazda 2? I thought the Mazda 3 standard doesn't come with cruise control?

It's a Mazda 2. Why do you think this is a standard model by the way?

It's a Mazda 2. Why do you think this is a standard model by the way?

Speedometer I think... Standard models diff from deluxe..

It's a Mazda 2. Why do you think this is a standard model by the way?

�

If this was a Mazda 3, it would be a standard - looking at the dash. The Tach is different on the deluxe.
�

Oh. The mazda 3 standard model uses the same speedo as the Mazda 2 Deluxe! Learn something new again.

Speedometer I think... Standard models diff from deluxe..

�

we learn frm each others...

Oh. The mazda 3 standard model uses the same speedo as the Mazda 2 Deluxe! Learn something new again.

�

Oh. The mazda 3 standard model uses the same speedo as the Mazda 2 Deluxe! Learn something new again.

�

The reason for the difference is due to the Active Driving Display (ADD) aka HUD. If you have the HUD, your speedo will be in digital format at the bottom right corner of the Tachometer.�

Photo of my ride after plastic dip.

Edited by Littledemon, 25 January 2016 - 08:42 PM.

Photo of my ride after plastic dip.

Wow nice same same here

Now i am really confused. So the Mazda 3 standard speedo is the same as the Mazda 2 deluxe? Or just because there is no HUD?

The reason for the difference is due to the Active Driving Display (ADD) aka HUD. If you have the HUD, your speedo will be in digital format at the bottom right corner of the Tachometer.�

�

Now you need to mask your tail lamps. [thumbsup]

Photo of my ride after plastic dip.

�

Guys, other than design stuff, what are the essential differences between HB and Sedan?

�

1) HB doesn't have the unlock boot button on its remote fob

2) HB has a heavier kerb weight

3) HB has a higher OMV

4) HB backseat feels more spacious due to more headroom.

�

Overall length?

Sedan 4580 vs HB 4460 mm

so I guess it's longer boot for prams or golf clubs?

�

wheelbase is the same though

Overall length?
Sedan 4580 vs HB 4460 mm
so I guess it's longer boot for prams or golf clubs?

wheelbase is the same though

That's right. Abit more space in the boot!

That's right. Abit more space in the boot!

Sedan top speed is 185km/h vs 180km/h for HB.. and 0-100KM/h acceleration is .1s faster though...probably due to lesser wt...

Edited by danzo, 25 January 2016 - 09:39 PM.

Now i am really confused. So the Mazda 3 standard speedo is the same as the Mazda 2 deluxe? Or just because there is no HUD?

Now you need to mask your tail lamps.

There is smoke colour plasti dip. But doing it on tailights is illegal. Wanted to do it, but dont want to be stop on the road.

Yup there is. When stopped just peel it off.

There is smoke colour plasti dip. But doing it on tailights is illegal. Wanted to do it, but dont want to be stop on the road.

Sedan top speed is 185km/h vs 180km/h for HB.. and 0-100KM/h acceleration is .1s faster though...probably due to lesser wt...

Superb bro. That I didn't know. I thought it's 0.1 seconds hahaha

Now i am really confused. So the Mazda 3 standard speedo is the same as the Mazda 2 deluxe? Or just because there is no HUD?

�

Now you need to mask your tail lamps.

�

Yes Mazda 3 Standard is same as Mazda 2 Deluxe.�

Superb bro. That I didn't know. I thought it's 0.1 seconds hahaha

�

Bro danzo typed point one.

�

The difference is 0.1s [lipsrsealed]

Edited by Zcold, 25 January 2016 - 10:31 PM.

Any prospects buyer for mazda3 check out the price today? Was looking at sg car mart and saw the promotion 'for a limited time only, enjoy a complementary upgrade from a mazda 3. 2.0L' was wondering si mi upgrade?

hi guys,�

�

anyone interested to take over TPMS �steelmate TP-77 .. used for about 2 mths plus.. still got warranty and in good condition.. PM if interested. letting go at $120�

Attached Thumbnails

Any prospects buyer for mazda3 check out the price today? Was looking at sg car mart and saw the promotion 'for a limited time only, enjoy a complementary upgrade from a mazda 3. 2.0L' was wondering si mi upgrade?

Free upgrade from 2.0L sedan to HB version, which is usually a couple of Ks more...now same price...

Edited by danzo, 25 January 2016 - 11:02 PM.

hi guys,�

�

anyone interested to take over TPMS �steelmate TP-77 .. used for about 2 mths plus.. still got warranty and in good condition.. PM if interested. letting go at $120�

Why u selling? thought of getting it as spare.....where u stay?

Why u selling? thought of getting it as spare.....where u stay?

�

Selling cos i realized i didnt bother to monitor at all haha.. and cos i just up-sized my rims and i think it doesnt look nice with the big cap on. i'm staying at bedok , work at greatworld city..�

Selling cos i realized i didnt bother to monitor at all haha.. and cos i just up-sized my rims and i think it doesnt look nice with the big cap on. i'm staying at bedok , work at greatworld city..�

How to install? Saw the guy at Autobac keep on driving my car in circle to get it working, u know how?

and finally i couldnt resist the temptation.. upsized from 16 to 17 and now 18..lol absolutely loved the 18.. forget about FC, pickup etc.. i couldnt see any diff at all.. Rays Gramlights 57transcend.. tyre continental sports contact 5 225/45/18.. to those who wanna go 18 but worry about this and that, my advise.. dont worry ..just get a lightweight 18 and all is well..�

How to install? Saw the guy at Autobac keep on driving my car in circle to get it working, u know how?

its plug and play.. just put on the correct caps on the tyres.. plug into the cig charger.. drive off ..once it rchs 20km /h it will be set.�

Attached Thumbnails

Now i am really confused. So the Mazda 3 standard speedo is the same as the Mazda 2 deluxe? Or just because there is no HUD?

�

Now you need to mask your tail lamps.

�

Mazda 3 standard no HUD, hence speedometer showing speed (km/h)

�

Mazda 3 deluxe have HUD (showing km/h), hence speedometer showing RPM, with speed at a small corner:)

�

where did you get your boot tray? Is it the type that fit perfectly?

�

�

It all boils down to what you want for your ride. For me, i bought the Mazda boot tray, sports pedals and sill plate before the delivery of the ride. After i collected my ride at LK, i went to stick some stickers immediately. Then went to PPS and then more cosmetic mods after that.

�

and finally i couldnt resist the temptation.. upsized from 16 to 17 and now 18..lol absolutely loved the 18.. forget about FC, pickup etc.. i couldnt see any diff at all.. Rays Gramlights 57transcend.. tyre continental sports contact 5 225/45/18.. to those who wanna go 18 but worry about this and that, my advise.. dont worry ..just get a lightweight 18 and all is well..�

its plug and play.. just put on the correct caps on the tyres.. plug into the cig charger.. drive off ..once it rchs 20km /h it will be set.�

�

swee! the body kit caught my attention more! [lipsrsealed]

�

Is it the same one as bro Mz3SP0907 from TEK thrown in by the dealer?

swee! the body kit caught my attention more!

�

Is it the same one as bro Mz3SP0907 from TEK thrown in by the dealer?

yup thats the one..�

Guys, other than design stuff, what are the essential differences between HB and Sedan?

�

1) HB doesn't have the unlock boot button on its remote fob

2) HB has a heavier kerb weight

3) HB has a higher OMV

4) HB backseat feels more spacious due to more headroom.

�

Apparently hatchbacks also get twin-exhaust.

�

And this is crucial thing of note: the hatchback has lower total cargo volume. The hatchback is also shorter.

�

Regarding sedan boot organizer, that is probably hard to find because sedan boot organizers are typically generic... just a large pouch/hard-case of some kind with compartments... since sedans aren't like hatchbacks where you can hide them under the toneau cover like seen in the HB one that's being offered

I think the radio antenna for sedan is the normal type, while the HB one is the 'shark' type.

�

Sedan uses glass type antenna from what I recall.

�

its plug and play.. just put on the correct caps on the tyres.. plug into the cig charger.. drive off ..once it rchs 20km /h it will be set.�

PM u ... [:p]

Apparently hatchbacks also get twin-exhaust.

And this is crucial thing of note: the hatchback has lower total cargo volume. The hatchback is also shorter.

Regarding sedan boot organizer, that is probably hard to find because sedan boot organizers are typically generic... just a large pouch/hard-case of some kind with compartments... since sedans aren't like hatchbacks where you can hide them under the toneau cover like seen in the HB one that's being offered

Twin exhaust only applicable to HB 2L, not the HB 1.5L.

Twin exhaust only applicable to HB 2L, not the HB 1.5L.

Just gives reason to install an axleback....:)

20150804_120452_zpslccmm0lz_edit_1438695

and finally i couldnt resist the temptation.. upsized from 16 to 17 and now 18..lol absolutely loved the 18.. forget about FC, pickup etc.. i couldnt see any diff at all.. Rays Gramlights 57transcend.. tyre continental sports contact 5 225/45/18.. to those who wanna go 18 but worry about this and that, my advise.. dont worry ..just get a lightweight 18 and all is well..

its plug and play.. just put on the correct caps on the tyres.. plug into the cig charger.. drive off ..once it rchs 20km /h it will be set.

Or lightweight 19s, like how Mazda designed envisioned the M3 to have, would elevate that plane....:)

image-b8524792c4567aa041b6b107c8c4d06393

DSC_0617_1_zpsnkds9dgd_edit_144413546410

P_20151217_163954_zpskdlkcy45_edit_14503

Oh, if anyone needs plate relocators like those in pics above, it's locally available. , my buddy, has a few kits left. The mod is reversible....Absolutely NO BUMPER DRILLING & installs in MINUTES. This kit has become the fave 1st mod of many. Thanks.:)

Edited by minsanity, 26 January 2016 - 06:02 AM.

Cool. Thanks for the confirmation mate.

Yes Mazda 3 Standard is same as Mazda 2 Deluxe.

Mazda Thailand, yes.

Hi

where did you get your boot tray? Is it the type that fit perfectly?

Edited by dcb, 26 January 2016 - 06:46 AM.

and finally i couldnt resist the temptation.. upsized from 16 to 17 and now 18..lol absolutely loved the 18.. forget about FC, pickup etc.. i couldnt see any diff at all.. Rays Gramlights 57transcend.. tyre continental sports contact 5 225/45/18.. to those who wanna go 18 but worry about this and that, my advise.. dont worry ..just get a lightweight 18 and all is well..

its plug and play.. just put on the correct caps on the tyres.. plug into the cig charger.. drive off ..once it rchs 20km /h it will be set.

Bro any reduction in noise lvl this one??

Having owned HB and Sedan, HB is still better when comes to practical - easier to load/unload. Of course, a nicely designed wagon is the best.� [thumbsup]

Having owned HB and Sedan, HB is still better when comes to practical - easier to load/unload. Of course, a nicely designed wagon is the best.

Hahaha... I like my babe with "kar chng"

SG should have. Gotta call Ubi branch and ask. Previously they quoted 4 times the amount i paid for the sports pedals, sill plates and boot tray.

U are lucky bro...�

�

I am just wonder if our Mazda Singapore has it too. And what other accessories they may be carrying?

�

SG should have. Gotta call Ubi branch and ask. Previously they quoted 4 times the amount i paid for the sports pedals, sill plates and boot tray.

�

I feel like a carrot...

Sorry can anyone tell me where can i get boot tray online? I dont know how to use tb.

How to install? Saw the guy at Autobac keep on driving my car in circle to get it working, u know how?

I have a feeling the autobacs one was defective - I saw one on sale for $30. When I tested it, I realised it wasn't working at all. Good to buy as a spare though. If you alr have one set, you can ask them to let you test the valve caps - cos the monitor was definitely not working.

Sorry can anyone tell me where can i get boot tray online? I dont know how to use tb.

�

Check my previous few post for the photo and link for the boot tray.

�

If don't know taobao just go to www.65daigou.com/

�

they have a buy for me option, simply copy the taobao�link to daigou and they will settle everything, u just relax and collect the item in sg can liao..

�

I also don't know how to use taobao initially, just google and you can find a lot of guides, not rocket science....learn how to use and you can save a lot of $$$...

�

Was told by Aviva that insurance refund could only be done by the driver - pdpa. So if you are still waiting for your $$, you may like to contact them.

Check my previous few post for the photo and link for the boot tray.

If don't know taobao just go to www.65daigou.com/

they have a buy for me option, simply copy the taobao link to daigou and they will settle everything, u just relax and collect the item in sg can liao..

I also don't know how to use taobao initially, just google and you can find a lot of guides, not rocket science....learn how to use and you can save a lot of $$$...

Thanks

Bro, for Biante�

�

http://www.hasepro.c...ategory_id=2420

Hi.....

�

Wonder does it fit into all Mazda steering wheels ?

�

I would like to add colours to my steering wheel. I am driving a Biante.

�

Thanks...

�

I have a feeling the autobacs one was defective - I saw one on sale for $30. When I tested it, I realised it wasn't working at all. Good to buy as a spare though. If you alr have one set, you can ask them to let you test the valve caps - cos the monitor was definitely not working.

Thks , bought from Issac oredi! Shiok!

�

�

12552596_10208505727939087_2168357842026

Edited by Axela525, 26 January 2016 - 06:14 PM.

Thks , bought from Issac oredi! Shiok!

Looks chio.... This is for measuring tyre pressure?

Looks chio.... This is for measuring tyre pressure?

yup......shiok!

12417979_10208505727739082_7625602101177

Sorry can anyone tell me where can i get boot tray online? I dont know how to use tb.

�

http://www.mazdapart...f3=2016&sw=1920

I started to have this memory error on my bp cam. Anyone knows why? Is it because it's time to erase format it?

Attached Thumbnails

Format the SD card and then set the cam to be in looping mode. [drivingcar]

I started to have this memory error on my bp cam. Anyone knows why? Is it because it's time to erase format it?

�

Any one warned you�at Mazda service centre about the your car�warranty status�when the�SE noticed your after market car amp or SW installation during your 1k or 5k servicing?

�

Thanks

Edited by praba, 26 January 2016 - 10:12 PM.

Format the SD card and then set the cam to be in looping mode.

Thanks. Will try. I thought it's auto set to be looping.

Thanks. Will try. I thought it's auto set to be looping.

Bro,

How big is your sd card storage and how long it can record before looping?

Think mine is the same as yours

Edited by rider83, 27 January 2016 - 08:20 AM.

Bro, for Biante�

�

http://www.hasepro.c...ategory_id=2420

�

Thanks ... [wave]

Manage to save one tree so far. I not sure izzit 65km for one tree, just happen to switch to this then notice�it

mycarforum

Thứ Hai, 28 tháng 11, 2016

2014 Mazda 3 part 84

Attached Thumbnails

Attached Thumbnails

Attached Thumbnails

Không có nhận xét nào:

Đăng nhận xét