mycarforum: 2014 Mazda 3 part 17

Anyone know the link (one.motoring) where I can check whether they have put in a coe bid for me.�

Anyone know the link (one.motoring) where I can check whether they have put in a coe bid for me.�

�

You sould be able to view it here by keying your IC no.

�

https://ocoe.lta.gov...ternetAction.do

Edited by Spring, 18 November 2014 - 03:28 PM.

�

You sould be able to view it here by keying your IC no.

�

https://ocoe.lta.gov...ternetAction.do

Thanks.�

Hopefully my problem is as simple. Hard to imagine the wiper dash can cause tt loud metallic clunk. Also the sound seemed to come from the base of the car, not front.. Anyway called mazda and fixed my appointment with them this fri. Keep you all posted.

�

Its not the plastic. Its the metal bracket which is welded to the A pillar & cowl plate. Its the joint thats causing this problem as there's no clearance when they were welded. Anyway, its a small problem (though irritating) which Mz Jpn has already provided the solution for.�

Edited by ST69, 18 November 2014 - 05:25 PM.

Hi All,�

�

Have anyone encountered that the infortainment of our Mazda 3 hang sometimes?�

�

I used to listen to USB very oftenly. i had encountered a few times while driving, the device suddenly hang (No sound), the play bar stopped and no matter how you forward, backward, pause, no use at all.�

So i switched to FM, FM is okay (But sometimes, even in FM, the system is like hang up there).

�

The only way to make everything back to normal is shutdown the engine and start the engine again.�

I feel something is wrong with the firmware but my car collected in september, should be the latest firmware right?�

�

Thank you

mazda cars is well designed but however not that durable...

mazda cars is well designed but however not that durable...

�

What makes u say that?

Common problem,Mazda 6 also the same,usually got sound after alot of wet driving.

Yeah, was crossing a big hump in the rain, there is this metallic sound which was not heard during dry conditions. During dry condition, when go through the hump, there is this DOK DOK sound.

Today, went to Mz Svc, they changed my lower arm bushings for me. I was told the bushings�connecting the lower arm to chassis is very hard.�

However, on my way back, I�think I am still hearing the DOK DOK sound when crossing over the hump. Will monitor a few days and update. Maybe, like what has been discussed before, it is the wiper joint?

Yeah, was crossing a big hump in the rain, there is this metallic sound which was not heard during dry conditions. During dry condition, when go through the hump, there is this DOK DOK sound.
Today, went to Mz Svc, they changed my lower arm bushings for me. I was told the bushings�connecting the lower arm to chassis is very hard.�
However, on my way back, I�think I am still hearing the DOK DOK sound when crossing over the hump. Will monitor a few days and update. Maybe, like what has been discussed before, it is the wiper joint?

Some Mazda owners has complained about this problem in the early may this year. Quite surprised that almost half a year still not solved yet. Most probably is the design flaws.

mazda cars is well designed but however not that durable...

�

Nay .... all cars are not durable. All mechanical parts must be replaced.

IT is a matter of economical viabilities.

Drive car like TRD must expect TRD level / cost of maintenance.

�

Some ppl are just more bo chap than others, thats all.

Some Mazda owners has complained about this problem in the early may this year. Quite surprised that almost half a year still not solved yet. Most probably is the design flaws.

All cars will have some nitty gritty secrets wan lor ... it is up to the users to accept or not.

The recent HONDA airbag recall is one of them.

High profile ones are LEXUS mat issue that killed a few ppl in USA.

At least this DOK DOK , CREAK CREAK sound dont kill ppl. That is more important.

MITSUIBISHI is another victim of a high profile scandal as well.

�

Mercedes even publicly demonstrates their "design flaws" on youtube of their A class on the MOOSE test on their 1st batch but no one died la.

Hi All,�

�

Have anyone encountered that the infortainment of our Mazda 3 hang sometimes?�

�

I used to listen to USB very oftenly. i had encountered a few times while driving, the device suddenly hang (No sound), the play bar stopped and no matter how you forward, backward, pause, no use at all.�

So i switched to FM, FM is okay (But sometimes, even in FM, the system is like hang up there).

�

The only way to make everything back to normal is shutdown the engine and start the engine again.�

I feel something is wrong with the firmware but my car collected in september, should be the latest firmware right?�

�

Thank you

�

Sounds like a faulty / incompatible configurations thumbdrive/SD card, loose connections (USB/SD) somewhere or the faulty infotainment hardware.

I also using a thumbdrive too ... format as FAT32.

�

Go here to download the toobox:

https://mazda-na.nav...ortal/downloads

�

To use it, you need to remove the SD card in the car and put into in the PC/laptop that you had installed the tool.

The program will need to access the SD card to connect to their main server.

�

Edited by Variablefeedback, 22 November 2014 - 04:55 PM.

Hi all, AD just secured my COE, but told me that my car is still on its way to SG. ETA early next month then can collect car. Any advice on the things to look out for when collecting the car? Also things that you discovered after a few months later but could have checked on your collection day if you know what to look out for? Thanks in advance. Cheers. ��

Hi, SE also inform me my coe bid successful. Shipment coming in around mid Dec.

Went in to check the clunk noise when going over humps on Fri, they replaced some bushings and the noise is gone. :) hopefully it lasts.

Went in to check the clunk noise when going over humps on Fri, they replaced some bushings and the noise is gone. :) hopefully it lasts.

Went around today and I think the sound is gone when going past the hump during dry conditions.

Which branch did you go yesterday bro? Was at Leng Kee when they changed the lower arm bushings.

Went around today and I think the sound is gone when going past the hump during dry conditions.
Which branch did you go yesterday bro? Was at Leng Kee when they changed the lower arm bushings.

I was at Ubi wkshp bro:) can check wats ur mileage? Mine is abt 7k.

Congrats guys! Seems like most of u manage to secure COEs despite the rise,
Looks like u will have a competitor soon in the Mazda 2 sedan(see other thread)!!

Cheers n hv a restful Sunday ahead!!

My take after driving it for few days, the 1.5L engine is really down on power. If you got additional budget, better go with 2.0L

I was at Ubi wkshp bro:) can check wats ur mileage? Mine is abt 7k.

bro,mine is only 1100km but heard the clunk since day one when i go over hump. hope it is resolved. i was told the rubber has hardened??? brand new car leh but overall think eurokars are still not bad. never run away from their problems.

My take after driving it for few days, the 1.5L engine is really down on power. If you got additional budget, better go with 2.0L

car is still running in. i was also not used to it at first but it seems to be better after 2 tanks of petrol. one more think i would like to share. off the traction control and i find the pick up seems to be better. anyone felt the same?

My take after driving it for few days, the 1.5L engine is really down on power. If you got additional budget, better go with 2.0L

�

Hey Oppositelock, are you referring to the pick up of the car? what is the car you are driving before this?

Hi, can I confirm that the interior light bulbs are 31mm Festoon type? Thinking of buying the LED type to replace.�

�

Also can confirm if there is 2x for front map reading, 1x for hatchback boot lights right? Is there an additional rear cabin light (after sun roof) in the cabin too? Does the flip down mirror have light (saw on the US user manual)? Thanks.�

�

Hey Oppositelock, are you referring to the pick up of the car? what is the car you are driving before this?

�

Yup, for the first 2 gear. Really slow. Before that I been driving manual car all my life.

Hi, can I confirm that the interior light bulbs are 31mm Festoon type? Thinking of buying the LED type to replace.�

What for?�

�

Also can confirm if there is 2x for front map reading

Yes.

�

, 1x for hatchback boot lights right?

Yes.

�

Is there an additional rear cabin light (after sun roof) in the cabin too?

Yes. But it cannot be turn OFF or ON at the back.

�

�

Does the flip down mirror have light (saw on the US user manual)? Thanks.�

No.

�

�

Yup, for the first 2 gear. Really slow. Before that I been driving manual car all my life.

Agreed but it is torquey. Maybe It is programmed to save the gear box I believe.

�

�

Hi, can I confirm that the interior light bulbs are 31mm Festoon type? Thinking of buying the LED type to replace.�

What for?�

�

�

So I can get white cabin light and choose brighter bulb instead. :-)�

�

Yup, for the first 2 gear. Really slow. Before that I been driving manual car all my life.

�

Most of the auto car cant match manual car. U will find the initial acceleration to be slower or not as responsive as manual version.

�

The new Honda Jazz 1.5 with powerful 130bhp engine and light 1.0 ton car frame is quite close to manual pickup, can go try. ��

Personally i dont feel its under power until it hits abt 120. Agree tt its torquey and more than enough to accelerate the car with passengers. Quite amazing tt its 1.5L only. Prev car is ford escape 2.3l - maybe tts why. Lol. For M3, i just rev more if I need to, engine sounds nice too.:) however i thk thr best is not the engine but the gearbox.. Somehow it just gets into the right gear and fast. Example when going up slope, it seems to know and holds the low gear longer. Might be my imagination too.

bro,mine is only 1100km but heard the clunk since day one when i go over hump. hope it is resolved. i was told the rubber has hardened??? brand new car leh but overall think eurokars are still not bad. never run away from their problems.

car is still running in. i was also not used to it at first but it seems to be better after 2 tanks of petrol. one more think i would like to share. off the traction control and i find the pick up seems to be better. anyone felt the same?

�

I hope it solved your clunk problem, though it didnt for me. Only after I made the TSB rectification (fr the Mz US) then the problem went away. But, if your car is mfg after Aug '14, then the problem shd have been fixed in factory.

�

As for Traction Control, yes, you are right. I felt the same too.�

Edited by ST69, 23 November 2014 - 09:44 PM.

�

I hope it solved your clunk problem, though it didnt for me. Only after I made the TSB rectification (fr the Mz US) then the problem went away. But, if your car is mfg after Aug '14, then the problem shd have been fixed in factory.

�

As for Traction Control, yes, you are right. I felt the same too.�

Hi bro,

Seems that the sound never really go away after driving for a while today. Can still hear some sound coming from the front when going over humps. Sounds like when I was on my coilovers when I did not set it hard enough...haha

Is it easy to rectify the wiper crowl plate? Seems not so easy when I read through. Did you do it yourself?

It would be good if can turn off the DSC though...don't think our car will fishtail in the wet..given its power and being a FWD car...

Hi guys, like to check if those who have customized with 3M mats. Does it extend up to the left foot rest area? Notice that the car does not have any plastic/rubber pad there to prevent wear... Thanks.

�

Something like this:

�

-font-b-3m-b-font-special-font-b-car-b-f

Congrats guys! Seems like most of u manage to secure COEs despite the rise,
Looks like u will have a competitor soon in the Mazda 2 sedan(see other thread)!!

Cheers n hv a restful Sunday ahead!!

�

Heard from my SE that Mazda has just overtook Nissan slightly as the 5th best seller in SG and they are trying very hard to close deal if possible to maintain that position for 2014.�

�

Think 1st is Toyota, 2nd is Merz, 3rd shld be BMW and 4th shld be VW...�

�

I hope it solved your clunk problem, though it didnt for me. Only after I made the TSB rectification (fr the Mz US) then the problem went away. But, if your car is mfg after Aug '14, then the problem shd have been fixed in factory.

�

As for Traction Control, yes, you are right. I felt the same too.�

�

You guys are right. Turning off the traction control helps slightly.

Hi guys, like to check if those who have customized with 3M mats. Does it extend up to the left foot rest area? Notice that the car does not have any plastic/rubber pad there to prevent wear... Thanks.
�
Something like this:
�

Yes mine extended to cover the foot rest.

Hi bro,

Seems that the sound never really go away after driving for a while today. Can still hear some sound coming from the front when going over humps. Sounds like when I was on my coilovers when I did not set it hard enough...haha

Is it easy to rectify the wiper crowl plate? Seems not so easy when I read through. Did you do it yourself?

It would be good if can turn off the DSC though...don't think our car will fishtail in the wet..given its power and being a FWD car...

�

Seems like what I experienced.

The instructions are pretty good. You need to remove the bonnet, then wiper then the plastic panel. The one tough part is removing the bonnet. To access the area, you need to have a screw driver that is long even & a hammer (preferably rubber head mallet).

I didnt remove them but only moved out the plastic panel to access the problem areas. This is ok for the left side side but for the right, its tricky as there's no much area to work with.. You shd also protect the areas at the bonnet chassis to prevent any accidental scratches. As my problem is more pronounced on the left side, so its ok.�

�

Unless you are used to DIY, I wld suggest sending back to Mz & show them the TSB.

�

There are 3 switches on the right driver's panel... namely iStop, TCS, AFS. You can turn them off & it shd reflect on the display. For me, I wld probably leave it on when road is wet or if its raining.

�

Seems like what I experienced.

The instructions are pretty good. You need to remove the bonnet, then wiper then the plastic panel. The one tough part is removing the bonnet. To access the area, you need to have a screw driver that is long even & a hammer (preferably rubber head mallet).

I didnt remove them but only moved out the plastic panel to access the problem areas. This is ok for the left side side but for the right, its tricky as there's no much area to work with.. You shd also protect the areas at the bonnet chassis to prevent any accidental scratches. As my problem is more pronounced on the left side, so its ok.�

�

Unless you are used to DIY, I wld suggest sending back to Mz & show them the TSB.

�

There are 3 switches on the right driver's panel... namely iStop, TCS, AFS. You can turn them off & it shd reflect on the display. For me, I wld probably leave it on when road is wet or if its raining.

Bro, thanks for your kind advice. I will look through the instructions again with regards to the TSB. Probably, I will take this to Mz.

With regards to the switches, yes, you are right. I think only TCS is de-activated when you off it but the DSC is still permanently on.

If we press that button for 10 secs, you can't off the lights anymore and it is in diagnostic mode for the TCS meaning it is fully on after that.

Bro, thanks for your kind advice. I will look through the instructions again with regards to the TSB. Probably, I will take this to Mz.

With regards to the switches, yes, you are right. I think only TCS is de-activated when you off it but the DSC is still permanently on.

If we press that button for 10 secs, you can't off the lights anymore and it is in diagnostic mode for the TCS meaning it is fully on after that

No problem. Happy to share. Remember to use the latest TSB as I believe there are at least 3 revisions since Jan.

�

I think there's only 1 switch for TCS/DCS combined. If I recall from the manual, its supposed to control both. Nvr tried pressing for 10s.�

Hi, can any bros share if anyone managed to get your car based on non guarantee coe?

I bought in Oct when coe is around 63k�and the last three round of coe Mazda keep bidding very low for my coe.�

They only bid $59k, 61k and 60k from the last three bidding.�

Seems like they are trying to secure their profit based on lower coe bidding.

Call the sales person she told me don't worry but looking at the current trend, i will be forced to top up if not walk away.� so sad!!!

Hi, can any bros share if anyone managed to get your car based on non guarantee coe?

I bought in Oct when coe is around 63k�and the last three round of coe Mazda keep bidding very low for my coe.�

They only bid $59k, 61k and 60k from the last three bidding.�

Seems like they are trying to secure their profit based on lower coe bidding.

Call the sales person she told me don't worry but looking at the current trend, i will be forced to top up if not walk away.� so sad!!!

Hi, you must check whether your�color of choice�is already in stock or coming any time soon. I believe most ADs will only place a�serious�bid to conclude the deal when the shipment�has�been�confirmed.

Edited by Dalenico, 24 November 2014 - 01:27 PM.

Hi, can any bros share if anyone managed to get your car based on non guarantee coe?

I bought in Oct when coe is around 63k�and the last three round of coe Mazda keep bidding very low for my coe.�

They only bid $59k, 61k and 60k from the last three bidding.�

Seems like they are trying to secure their profit based on lower coe bidding.

Call the sales person she told me don't worry but looking at the current trend, i will be forced to top up if not walk away.� so sad!!!

�

If you read some of the earlier posts in this thread, quite a few guys here faced the same problem but got the COE in the end. So what you faced seems a common issue with Mazda AD.

�

My guess is they just put in a token bid or in some cases, no bid at all till the stock is here then they will bid seriously. Of course if COE goes up too high then you may not get it in the end but personally I still feel you will get it but have to be patient I guess

No problem. Happy to share. Remember to use the latest TSB as I believe there are at least 3 revisions since Jan.

�

I think there's only 1 switch for TCS/DCS combined. If I recall from the manual, its supposed to control both. Nvr tried pressing for 10s.�

Hi Bro, is the TSB you are referring to? I shall try and see if I can access to those said parts myself.

Attached Files

�( uploadMB.com ) Mazda TSB - Ticking Noise.pdf ��1.22MB ��73 downloads

Hi, can any bros share if anyone managed to get your car based on non guarantee coe?

I bought in Oct when coe is around 63k�and the last three round of coe Mazda keep bidding very low for my coe.�

They only bid $59k, 61k and 60k from the last three bidding.�

Seems like they are trying to secure their profit based on lower coe bidding.

Call the sales person she told me don't worry but looking at the current trend, i will be forced to top up if not walk away.� so sad!!!

�

If your car is not built or not here yet, the bid they submit is just for show.� You would not want them to do nothing after you booked your car�and paying the deposit right?�

�

Also, why secure the COE now for you when they cannot deliver you your car any time soon.� They might as well�use "your money" more wisely [thumbsup] �....

�

So depend on when your estimated delivery date, you may secure your COE at your fifth or last try � Unless the COE really go haywire otherwise I doubt�the agent would not want�your business.� Maybe they ask you to top up [knife] .....then it is your call!!

Hi Bro, is the TSB you are referring to? I shall try and see if I can access to those said parts myself.

�

I used the Aug version as attached, though not sure if this is latest.

Attached Files

�09-001-14-2872b (1).pdf ��142.25KB ��151 downloads

�

I used the Aug version as attached, though not sure if this is latest.

Thanks bro, the one I get is extracted from the version you have attached.

By the way, need to remove BONNET?? haha..think I better don't touch it

Edited by Dalenico, 24 November 2014 - 03:20 PM.

Hi, can any bros share if anyone managed to get your car based on non guarantee coe?

I bought in Oct when coe is around 63k�and the last three round of coe Mazda keep bidding very low for my coe.�

They only bid $59k, 61k and 60k from the last three bidding.�

Seems like they are trying to secure their profit based on lower coe bidding.

Call the sales person she told me don't worry but looking at the current trend, i will be forced to top up if not walk away.� so sad!!!

�

Mz is a small company compared to Honda/Toyota/Nissan. They only mfg in Jpn unlike the bigger companies where they are made in TH.�

�

So, they do have a bottleneck in terms of fulfilling demand esp for this new range of cars where its been a great hit & the demand is much greater than what they planned for (its not just SG, which is not a big mkt for them).�

�

My suggestion is that if you really like the car, just go for guarantee bid. No one will know how COE will go but by the trend & the strong demand going into year end & CNY, its unlikely to go down, unless you have no urgency.

Thanks bro, the one I get is extracted from the version you have attached.

By the way, need to remove BOOT?? haha..think I better don't touch it

�

Yeah...better send to Mz, its on warranty. For me, its just interest & personal touch. [rolleyes]

Hi, can any bros share if anyone managed to get your car based on non guarantee coe?

I bought in Oct when coe is around 63k�and the last three round of coe Mazda keep bidding very low for my coe.�

They only bid $59k, 61k and 60k from the last three bidding.�

Seems like they are trying to secure their profit based on lower coe bidding.

Call the sales person she told me don't worry but looking at the current trend, i will be forced to top up if not walk away.� so sad!!!

I book the car on 11 Nov for the non guarantee 6 bid package. On the 19 Nov, my SE sms me saying the coe of $67889 is secured for my car. Shipment eta mid Dec. I had chosen the crystal blue colour.

The red colour shipment is Jan 2015. Maybe you choose the red color?

Yes mine extended to cover the foot rest.

Thanks pal. Cheers.

Hi, can any bros share if anyone managed to get your car based on non guarantee coe?
I bought in Oct when coe is around 63k�and the last three round of coe Mazda keep bidding very low for my coe.�
They only bid $59k, 61k and 60k from the last three bidding.�
Seems like they are trying to secure their profit based on lower coe bidding.
Call the sales person she told me don't worry but looking at the current trend, i will be forced to top up if not walk away.� so sad!!!

I also booked in Nov 14 using non-guaratee bid. But when I check back, the amount I booked before the discount (loan, insurance, etc) $121k is already more then the previous Sep/Oct guaranteed price...

Can I ask, how many speakers are there in the Deluxe model? 4?�

Can I ask, how many speakers are there in the Deluxe model? 4?�

Deluxe is 6
Standard is 4

Deluxe is 6
Standard is 4

�

Where is the speakers located at? Mine is deluxe, 2 front door, 2 rear door, where is the remaining 2? Is is on the left and right of the dash board?�

There is a new update to the SD card.

Please use your MAZDA TOOLBOX to update it.

The process is quite long.

Somehow it just gets into the right gear and fast. Example when going up slope, it seems to know and holds the low gear longer. Might be my imagination too.

�

Same if you are cornering ...

I also booked in Nov 14 using non-guaratee bid. But when I check back, the amount I booked before the discount (loan, insurance, etc) $121k is already more then the previous Sep/Oct guaranteed price...

�

Thanks all bro for sharing.� Mine was soul red and understand production is in November and shipment in Dec.� My price before discount etc was 118k and hopefully i would still be able to get it.

�

Was just getting moody after seeing�most of my bids are all very low.�

There is a new update to the SD card.

Please use your MAZDA TOOLBOX to update it.

The process is quite long.

�

[thumbsup]

�

Mz is a small company compared to Honda/Toyota/Nissan. They only mfg in Jpn unlike the bigger companies where they are made in TH.�

�

So, they do have a bottleneck in terms of fulfilling demand esp for this new range of cars where its been a great hit & the demand is much greater than what they planned for (its not just SG, which is not a big mkt for them).�

�

My suggestion is that if you really like the car, just go for guarantee bid. No one will know how COE will go but by the trend & the strong demand going into year end & CNY, its unlikely to go down, unless you have no urgency.

�

Yeah...better send to Mz, its on warranty. For me, its just interest & personal touch.

�

Actually Mazda manufactures in Thailand as well. They built the Mz2 previously over there, as well as the BT trucks/pickups.

�

Actually Mazda manufactures in Thailand as well. They built the Mz2 previously over there, as well as the BT trucks/pickups.

�

Dont know abt previously, just know that the new skyactive engines are out of Jpn.

�

Actually Mazda manufactures in Thailand as well. They built the Mz2 previously over there, as well as the BT trucks/pickups.

�

I think it's only the Mazda 2 sedan that is made in Thailand and not the Mazda 2 hatchback which is from Japan.

�

Edited by Spring, 25 November 2014 - 12:00 PM.

�

�

I think it's only the Mazda 2 sedan that is made in Thailand and not the Mazda 2 hatchback which is from Japan.

�

�

�

�

I believe the new Mz2 hatch will be made in Thailand. Pretty limited compared to Thaiyota [smallcry]

�

�

cant update.. not mac frenly

�

Thanks all bro for sharing.� Mine was soul red and understand production is in November and shipment in Dec.� My price before discount etc was 118k and hopefully i would still be able to get it.

�

Was just getting moody after seeing�most of my bids are all very low.�

All the best bro. Good luck!!

�

I believe the new Mz2 hatch will be made in Thailand. Pretty limited compared to Thaiyota

�

Magfocus, you into Headphone?�

I am ....�

�

Magfocus, you into Headphone?�

I am ....�

�

Yes sir, likewise [wave]

�

�

Yes sir, likewise

Great! I am using Sony MDR-SA5000 headphones.

Presently waiting for my LH labs Geek Pulse X - FI to arrive ...�

Like to check if there is a hood insulation for the new Mazda 3? Thks

�

What's the purpose of the insulation? I reckon more effective in countries that snow to keep the heat.

Singapore?

What's the purpose of the insulation? I reckon more effective in countries that snow to keep the heat.

Singapore?

�

It is also suppose to reduce the heating of your hood that may cause early paint problem as well as to reduce a little engine noise.

Like to check if there is a hood insulation for the new Mazda 3? Thks

�

I dont think there's original ones, though most Auto Accessories shop can customize one.�

�

For me, I DIY.

�
It is also suppose to reduce the heating of your hood that may cause early paint problem as well as to reduce a little engine noise.

Early paint problem from engine heat? Don't think Mazda paint so jialat right? Furthermore we park our cars under the sun also same. Don't think it insulates the Engine noise from cabin too.

Anyway imho it's more of a "want" not a "need". For a "feel good" factor yeah?

More for paint protection rather then sound insulation unless its padded.good for maintenance guys with greasy hands..

�

I dont think there's original ones, though most Auto Accessories shop can customize one.�

�

For me, I DIY.20141128_151501.jpg

�

Where did you buy the insulating sheet from? Thanks

�

Where did you buy the insulating sheet from? Thanks

�

Bought online (ebay & ali), couple of sqm to insulate not just the bonnet but also wheel arches, boot areas, & parts of roof & door. Now, the sound is not so intrusive. For a heavy car, the metal is really thin, probably all the wt is in the frame, which explains why it gets such high crash ratings.�

�

Bought online (ebay & ali), couple of sqm to insulate not just the bonnet but also wheel arches, boot areas, & parts of roof & door. Now, the sound is not so intrusive. For a heavy car, the metal is really thin, probably all the wt is in the frame, which explains why it gets such high crash ratings.�

�

Its normal for cars nowadays to use thin panel. The panels are there to cover up the frame and for aerodynamic purposes only. Like the Toyota Tundra in US also. Super thin panel.

Anyone here also collecting their Mazda in Dec 14? Like to check if there is any update on the date of collection? My SE could not give me a firm date yet... :-(

Anyone here also collecting their Mazda in Dec 14? Like to check if there is any update on the date of collection? My SE could not give me a firm date yet... :-(

My SE told me should be able to collect mid or 3rd week of Dec.

My SE told me should be able to collect mid or 3rd week of Dec.

�

Its going to be a long wait.... ha ha� :blink:

Anyone here also collecting their Mazda in Dec 14? Like to check if there is any update on the date of collection? My SE could not give me a firm date yet... :-(

�

usually their monthly shipment will arrive in singapore ard mid of the month, after that it take 1 to 2 week to prepare the car and other add on, eg solar film, so typically should collect car in 3rd or 4th week of the month.

Collect my Mz3. Time to mod my ride... any Mazda 3 meet up ?? Mazda forum seems quiet.

Collect my Mz3. Time to mod my ride... any Mazda 3 meet up ?? Mazda forum seems quiet.

Well,Mazda 6 has created a "What's App" chat group with 25 persons,i think it is time for some Mazda 3 owners to do so.

Collect my Mz3. Time to mod my ride... any Mazda 3 meet up ?? Mazda forum seems quiet.

Congrats! Meet up seems fun.

Hopefully this thread can be active as long as possible to share mod n stuff on 2014 Mazda 3 :) anyone able to share/ recommend sound proofing ?

Collect my Mz3. Time to mod my ride... any Mazda 3 meet up ?? Mazda forum seems quiet.

�

Wow, is your Mz3 collection consider early? Just to check if your Mz3 is of earlier shipment or the Dec shipment? I presume your COE is secured in Nov right? Thanks.�

�

�

I think it's only the Mazda 2 sedan that is made in Thailand and not the Mazda 2 hatchback which is from Japan.

�

�

�

Thats what I recalled also. Ref to the 08 Mz 2 & the sedan that came somewhere in 2010-2011.

Fully agree. esp with�very high comp operating in�our hhss conditions. Engine noise/note/sound is nice for me. My cp got 2 new Mz 3 liao. 1 sedan , 1 HB. Nice lah, i must say. Curvy but not overdone.

i think shud not happen. Usually premature degradation/bubbling/peeling of paintwork tends to happen more on re-spay works where the price is 'too competitive'. OEM paintwork should b of high quality.

I don't �understand why the Mz 3 in Sg they did not give these features whereas this similar feature can be found in Mz 6 which is sold in Sg as the luxury model. We are already paying a high price and yet feel short-changed. As consumers, we should be demanding the dealer to give us models which is quite standard in other country. SCBS and RVM should be standard at least.

Additional safety features:�

DSC - Dynamic Stability Control

RVM - Rear Vehicle Monitoring System

HBC - High Beam Control

LDWS - Lane Departure Warning system

AFS - Adaptive Front Lighting System

SCBS - Smart City Brake System

Well,Mazda 6 has created a "What's App" chat group with 25 persons,i think it is time for some Mazda 3 owners to do so.

�

Wah so many!

�

I don't �understand why the Mz 3 in Sg they did not give these features whereas this similar feature can be found in Mz 6 which is sold in Sg as the luxury model. We are already paying a high price and yet feel short-changed. As consumers, we should be demanding the dealer to give us models which is quite standard in other country. SCBS and RVM should be standard at least.

Additional safety features:�

DSC - Dynamic Stability Control

RVM - Rear Vehicle Monitoring System

HBC - High Beam Control

LDWS - Lane Departure Warning system

AFS - Adaptive Front Lighting System

SCBS - Smart City Brake System

�

�

In Sg, since when what we "demand" is given?
�

At least u get double the airbags of an Altis buyer.

I believe this is all to do with trying to keep the OMV low.

At least u get double the airbags of an Altis buyer.
I believe this is all to do with trying to keep the OMV low.

That's what I was told too. Quite disappointed that don't have RVM..

�
Wah so many!

�
In Sg, since when what we "demand" is given?
�

Ya those listed missing items are nice to have in city drivi g...

�

Wah so many!

�

In Sg, since when what we "demand" is given?
�

�

That's because the voice is so small it is treated as "noise" if there are any in the 1st place. The world has already gotten smaller with internet that is filled with information which help us to make better judgement as consumer. As much as I would like to buy a new Mz 3 in Sg to replace my current Mz 3 I won't until they bring in models that has these safety features. �

�

I don't �understand why the Mz 3 in Sg they did not give these features whereas this similar feature can be found in Mz 6 which is sold in Sg as the luxury model. We are already paying a high price and yet feel short-changed. As consumers, we should be demanding the dealer to give us models which is quite standard in other country. SCBS and RVM should be standard at least.

Additional safety features:�

DSC - Dynamic Stability Control

RVM - Rear Vehicle Monitoring System

HBC - High Beam Control

LDWS - Lane Departure Warning system

AFS - Adaptive Front Lighting System

SCBS - Smart City Brake System

�

�

Wow...you mean M6 2.0L now has these features? �When I was shopping in May, only the top end 2.5L Luxury mdl has them. The basic 2.0 dont even have keyless entry, rain sensor, sunroof, keyless entry, iEloop, iStop etc etc..which influenced my decision... [;)]

�

My batch of M3 came with DSC-Traction Control, AFS .. so this new shipment of M3 doesnt have them? whatelse did they remove?

�

btw, if you want better pick-up, try switching off DSC.

Edited by ST69, 01 December 2014 - 02:52 PM.

�

Wow...you mean M6 2.0L now has these features? �When I was shopping in May, only the top end 2.5L Luxury mdl has them. The basic 2.0 dont even have keyless entry, rain sensor, sunroof, keyless entry, iEloop, iStop etc etc..which influenced my decision...

�

My batch of M3 came with DSC-Traction Control, AFS .. so this new shipment of M3 doesnt have them? whatelse did they remove?

�

btw, if you want better pick-up, try switching off DSC.

Nope,Mazda 6,2.0 does not come with these features....DSC got nothing�to do with power...if your wheels got full traction[dry road].

Onr thing missing from 2.5 Mazda 6 is the MRCC,[Radar Cruise Control],but cannot even opt this feature even we pay extra..

Come across this sound proofing of M3 in Japanese. They add extra sound proof to the original hood insulator... The higher pitch noise seems to be reduced...�

�

Edited by Brainstorm, 01 December 2014 - 08:28 PM.

Nope,Mazda 6,2.0 does not come with these features....DSC got nothing�to do with power...if your wheels got full traction[dry road].

Onr thing missing from 2.5 Mazda 6 is the MRCC,[Radar Cruise Control],but cannot even opt this feature even we pay extra..

�

The TCS part of DSC. Go watch Top Gear & it explains why...gotta do with TCS reducing engine pwr &/or braking to reduce wheel spin.

�

Anyway, I wld agree no difference for normal driving, but if you want to do century sprint, then for sure there's a difference, & have tested it & felt the difference.

yesterday was at bukit batok for lunch.

saw this swee swee �white M3 HB in car audio shop for sound treatment and upgrades, quickly take a look see.

The front and back speakers are 5". Front are components.

Can upsize to 6.5" .

<p>I don't �understand why the Mz 3 in Sg they did not give these features whereas this similar feature can be found in Mz 6 which is sold in Sg as the luxury model. We are already paying a high price and yet feel short-changed. As consumers, we should be demanding the dealer to give us models which is quite standard in other country. SCBS and RVM should be standard at least.
Additional safety features:�DSC - Dynamic Stability ControlRVM - Rear Vehicle Monitoring SystemHBC - High Beam ControlLDWS - Lane Departure Warning systemAFS - Adaptive Front Lighting SystemSCBS - Smart City Brake System

To me, all these functions are totally useless in Singapore, by adding them, will only jack up the car price further. Everyday I go to work, I just turn on the engine and go. Even when it comes to parking, I never even use the reverse sensor. Mazda 3 is such a small car, very easy to drive and park. All you need is abs and airbags.

�
Wow...you mean M6 2.0L now has these features? �When I was shopping in May, only the top end 2.5L Luxury mdl has them. The basic 2.0 dont even have keyless entry, rain sensor, sunroof, keyless entry, iEloop, iStop etc etc..which influenced my decision...
�
My batch of M3 came with DSC-Traction Control, AFS .. so this new shipment of M3 doesnt have them? whatelse did they remove?
�
btw, if you want better pick-up, try switching off DSC.

I always turn off mine, very annoying especially first 2 gears. Keep cutting the power. For a good everyday car, the electronic aids must not be intrusive, if not, it's annoying. Fwd car wheel spin never mind one and it's hard to lose control. Traction control only useful for high powered rwd cars.

For high powered AWD, I can't even slide a 200+bhp legacy with TCS off by flooring it with full lock.

Edited by Oppositelock, 02 December 2014 - 12:22 PM.

To me, all these functions are totally useless in Singapore, by adding them, will only jack up the car price further. Everyday I go to work, I just turn on the engine and go. Even when it comes to parking, I never even use the reverse sensor. Mazda 3 is such a small car, very easy to drive and park. All you need is abs and airbags.

�

Having driven a car with those features,� I wouldn't say it is useless in Sg.� These items can be added in as additional cost for those who are willing to fork it out. As it is an option classified as "safety pack" when I purchase the car.

�

I have shown the videos to my colleagues and they were amazed at that and also agreed that these are very good feature for them to consider having when purchasing the car.

�

I always turn off mine, very annoying especially first 2 gears. Keep cutting the power. For a good everyday car, the electronic aids must not be intrusive, if not, it's annoying. Fwd car wheel spin never mind one and it's hard to lose control. Traction control only useful for high powered rwd cars.

For high powered AWD, I can't even slide a 200+bhp legacy with TCS off by flooring it with full lock.

�

Exactly right. I also turned if off too unless its raining or road is wet.�

Good day Mazda 3 drivers, anyone try E-rev sound proofing ??

I always turn off mine, very annoying especially first 2 gears. Keep cutting the power. For a good everyday car, the electronic aids must not be intrusive, if not, it's annoying. Fwd car wheel spin never mind one and it's hard to lose control. Traction control only useful for high powered rwd cars.

For high powered AWD, I can't even slide a 200+bhp legacy with TCS off by flooring it with full lock.

Could it be the standard Toyo tyres poor grip.?So far my Mazda 6 don't have these 'power cut' even in wet.

<p>I don't �understand why the Mz 3 in Sg they did not give these features whereas this similar feature can be found in Mz 6 which is sold in Sg as the luxury model. We are already paying a high price and yet feel short-changed. As consumers, we should be demanding the dealer to give us models which is quite standard in other country. SCBS and RVM should be standard at least.
Additional safety features:�DSC - Dynamic Stability ControlRVM - Rear Vehicle Monitoring SystemHBC - High Beam ControlLDWS - Lane Departure Warning systemAFS - Adaptive Front Lighting SystemSCBS - Smart City Brake System

M3 deluxe has AFS.

All the best bro. Good luck!!

�

I got my bid �so happy.

�

I got my bid �so happy.

�

I told you so right? Have to be patient cos Mz AD does it this way mostly.

Anyway, Congrats and enjoy your new ride [thumbsup]

�
I got my bid �so happy.

Congrats. The COE this time round also quite high $67k. Good for all those that have bought (higher paper value if sell before 10yrs) :-)

Anyone change after market exhaust system?

Will changing to 17 or 18inch rim with potenza re11a improve the handling?

Congrats. The COE this time round also quite high $67k. Good for all those that have bought (higher paper value if sell before 10yrs) :-)

�

Not much different between a 65K or 70K COE when amortise over 10 years.

Anyway there is hardly any paper value to think about with the ARF at about $6K, and highest can get is 75% of ARF.

BuyCarTv,Taiwan...give [thumbsup] �good review � to the Mazda 3,2.0,go & view it...

Anyone change after market exhaust system?

Will changing to 17 or 18inch rim with potenza re11a improve the handling?

The car floats above 135km/hr ...�

I believe its the dampers ... so in short, i dont think it will improve handling at high speed ...�

at low speed it will .... but it is not relevant.

�

maybe front strut bar better ...�

�

Not much different between a 65K or 70K COE when amortise over 10 years.

Anyway there is hardly any paper value to think about with the ARF at about $6K, and highest can get is 75% of ARF.

�

Yes, not much difference. But since you already committed the amount to buy at that agreed price, which one will you rather want? AD secured a lower COE or a higher COE for you? I will be happier for the latter.. cos the money, though in paper form, is in my pocket and not the AD's. Right? Ha ha

BuyCarTv,Taiwan...give �good review � to the Mazda 3,2.0,go & view it...

I noticed from BuyCarTv, sometimes the package they got there seems to be quite different from us. probably LHD?

�

but I do find their review good and not so bias like some that praises every car to heaven..�

�

btw, their ford focus ST review is the best i've seen on youtube!

Anyone change after market exhaust system?

Will changing to 17 or 18inch rim with potenza re11a improve the handling?

�

I dun think there any available after market exhaust system in SG yet..

�

What Rim you planning [cool] �... Potenza tyre are good [thumbsup]

I noticed from BuyCarTv, sometimes the package they got there seems to be quite different from us. probably LHD?

�

but I do find their review good and not so bias like some that praises every car to heaven..�

�

btw, their ford focus ST review is the best i've seen on youtube!

Cars for different country,different equipment...due to alot of factors like taxes,weather...

Hi guys, I dont recall seeing any 12v socket around the dashboard. There is only one socket under the armrest. Is that correct? How do you guys connect your DVR camera? (I don't plan to connect it directly to the battery) From the US user manual, both the USB and 12v socket under the armrest won't turn off after you off the ignition... Is that true? Thanks.�

�
I dun think there any available after market exhaust system in SG yet..
�
What Rim you planning �... Potenza tyre are good

Still looking around. Kinda like enkei. Original vs replica question again. Which one to get? I know stock rim maybe better than replica but this is a slow car. I was thinking no need to go all the way to buy original.

Still looking around. Kinda like enkei. Original vs replica question again. Which one to get? I know stock rim maybe better than replica but this is a slow car. I was thinking no need to go all the way to buy original.

Enkei is light n good. I have change 2 set of enkei on my previous ride. Buy Original no point replica.

Potenza tyre are good

�

Yes but expensive too ...�

Enkei is light n good. I have change 2 set of enkei on my previous ride. Buy Original no point replica.

[thumbsup] �

Hi guys, I dont recall seeing any 12v socket around the dashboard. There is only one socket under the armrest. Is that correct? How do you guys connect your DVR camera? (I don't plan to connect it directly to the battery) From the US user manual, both the USB and 12v socket under the armrest won't turn off after you off the ignition... Is that true? Thanks.�

It will turn off so not relevant to us.

I am using the 12V car socket for my 5Vdc DVR.�

�

Yes but expensive too ...�

�

It will turn off so not relevant to us.

I am using the 12V car socket for my 5Vdc DVR.�

�

Thanks pal.�

Anyone change after market exhaust system?

Will changing to 17 or 18inch rim with potenza re11a improve the handling?

Do not change the original manifold if you're changing to after market exhaust system.
The manifold is specifically design for the high compression of this car.

Any driver had sent in ur Mz 3 for 1st servicing ? What they did ? and u guys request to check on any parts ?

Enkei is light n good. I have change 2 set of enkei on my previous ride. Buy Original no point replica.

I'm still using the stock rim and tires first. Wear it down first, cause if I trade in the brand new and original tires also not much value. Might as well use it till its worn.

Do not change the original manifold if you're changing to after market exhaust system.
The manifold is specifically design for the high compression of this car.

Yup, thanks. Saw it on the video about mazda 3.

mycarforum

Chủ Nhật, 27 tháng 11, 2016

2014 Mazda 3 part 17

Attached Files

Attached Files

Không có nhận xét nào:

Đăng nhận xét