Show some pics when they arrive! Hiw many watts n lumens?Ordered my bulbs. No driver needed direct bulb replacement led
Ordered my bulbs. No driver needed direct bulb replacement led
Good and convenient plug and play. The driver should be built in at the bottom of bulb. Make sure u have enough ventilation for it. Just try first as I was told that after market LEDs are not bright unless u get the type with CREE chip.
Show some pics when they arrive! Hiw many watts n lumens?
30W 3000 lumen per bulb.
�
I shared the link the other time. It has no drivers but come with heatsink and cooling fan. The bulb unlike the rest, the connector is the same as H7 bulbs. Those with drivers has a different connection cable to connect to the driver then from the driver with the H7 connector.
Good and convenient plug and play. The driver should be built in at the bottom of bulb. Make sure u have enough ventilation for it. Just try first as I was told that after market LEDs are not bright unless u get the type with CREE chip.
it is cree, considered philips led but think i try this out first since all the bulbs are very very cheap anyway, gg to my audio shop to tune my ICE so buy along and get them to help me install along the way while trying different bulbs.
�
btw, i noted that the 3 leds are only on one side.
btw, i noted that the 3 leds are only on one side.
Means uneven light ?
If the LEDs face one side only, then you need a reflector bowl to collimate the light and throw it forward... does the original housing have that?
btw, i noted that the 3 leds are only on one side.
�
the LEDs should be on both sides.
�
means 6 leds on one bulb.
haaa i see. the Driver is probably bulit into the round container below the heat sinks. clean design should make it easier for installatoin.
�
looks good!
�
during installation, the 2 sides with the bulbs should face left and right to get the proper light throw from our projection housings.
�
3000 lumens each, total 6000 lumens. 30 watts each. conservative numbers are good, prevent overheating compared to the ambitions 10000 lumen 120 watts bulbs hehe
�
�
�
30W 3000 lumen per bulb.
�
I shared the link the other time. It has no drivers but come with heatsink and cooling fan. The bulb unlike the rest, the connector is the same as H7 bulbs. Those with drivers has a different connection cable to connect to the driver then from the driver with the H7 connector.
it is cree, considered philips led but think i try this out first since all the bulbs are very very cheap anyway, gg to my audio shop to tune my ICE so buy along and get them to help me install along the way while trying different bulbs.
�
�
Edited by ricleosg, 08 July 2016 - 10:00 AM.
Hi anyone know where can i get my rear light cover fix bside gg back to C&C? normally will cost how much?
�
tio hit by a bike n the f**ker ran off. check my video can c the bike but cant c the bike plate zzzz
Attached Thumbnails
the LEDs should be on both sides.
�
means 6 leds on one bulb.
i checked the pic on other sellers of the same item, onli 1 side. the rear is empty lol
Hi anyone know where can i get my rear light cover fix bside gg back to C&C? normally will cost how much?
�
tio hit by a bike n the f**ker ran off. check my video can c the bike but cant c the bike plate zzzz
there are a few stockist for KIA, dun get from C&C.
�
Nevertheless, iirc the rear lamp dun come cheap, a few hundred bucks for 1 side.
i checked the pic on other sellers of the same item, onli 1 side. the rear is empty lol
there are a few stockist for KIA, dun get from C&C.
�
Nevertheless, iirc the rear lamp dun come cheap, a few hundred bucks for 1 side.
�
They dun sell the cover alone? Got anyplace to intro where i can get it replace?
haaa i see. the Driver is probably bulit into the round container below the heat sinks. clean design should make it easier for installatoin.
�
looks good!
�
during installation, the 2 sides with the bulbs should face left and right to get the proper light throw from our projection housings.
�
3000 lumens each, total 6000 lumens. 30 watts each. conservative numbers are good, prevent overheating compared to the ambitions 10000 lumen 120 watts bulbs hehe
�
�
From the looks of it, i think the bulb is gg to be like this
�
1 sided only, not sure how it is gg to project the beam on one side.
�
$106,999 with COE 27-Jun-2016 $55,200 (CAT A) $105,999 with COE 13-Jun-2016 $53,694 (CAT A) $97,999 with COE 02-Jun-2016 $47,020 (CAT A) $96,999 with COE 24-May-2016 $47,020 (CAT A) $95,999 with COE 26-Apr-2016 $47,300 (CAT A) $93,999 with COE 22-Apr-2016 $47,300 (CAT A) $92,999 with COE 08-Apr-2016 $46,009 (CAT A) $90,999 with COE 28-Mar-2016 $45,504 (CAT A) $90,999 with COE 11-Mar-2016 $45,000 (CAT A) $88,999 with COE 22-Feb-2016 $43,000 (CAT A) 
$88,999 with COE 19-Feb-2016 $43,000 (CAT A) �
Few months ago, when the COE�was $43k, the car price was $88,999.
But compared with last 2 weeks COE was�$55,200(increased $12,200), why the car price shoot up to $106,999(increased $18,000)? so much different?
any bro here can advice?
Cause now selling is the new FL model, few months ago they still selling / clearing old stocks.
That's H4 design where the same bulb is used for high n low beam using the reflector housing.From the looks of it, i think the bulb is gg to be like this
1 sided only, not sure how it is gg to project the beam on one side.
If the seller gives u this for a h7 den your illumination will not be even
Cheapest i see on ebayHi anyone know where can i get my rear light cover fix bside gg back to C&C? normally will cost how much?
tio hit by a bike n the f**ker ran off. check my video can c the bike but cant c the bike plate zzzz
Look at this on eBay http://www.ebay.com/itm/272247780941
Opps this cheap one is ex light. Sx led rear lamp is 300+ for that piece. If buy whole set of 4 is 700+
Edited by ricleosg, 08 July 2016 - 11:03 AM.
Cause now selling is the new FL model, few months ago they still selling / clearing old stocks.
�
New FL got same specs as "old" SX Sports (the batch with the sunroof one) ?
New FL got same specs as "old" SX Sports (the batch with the sunroof one) ?
�
Have some new specs than the SX sports.
�
Actually, SX sports only outstanding specs are the 6 air bags and sunroof, that's all.
Have some new specs than the SX sports.
�
Actually, SX sports only outstanding specs are the 6 air bags and sunroof, that's all.
and HID.
�
�
First batch is HID and touchscreen HU.
What are the new stuff in FL?Have some new specs than the SX sports.
Actually, SX sports only outstanding specs are the 6 air bags and sunroof, that's all.
What are the new stuff in FL?
�
From what I can see in the showroom car, the SX comes with both front passenger and driver ventilated (air con) seats.
�
The flexsteer button also relocated to beside the gearshift, instead of on the steering wheel in the current models.
�
Otherwise, visually, I do not see any difference in the cabin.
Edited by Jzachlee, 08 July 2016 - 02:18 PM.
The new model K3 come with sunroof?
Hi bro Kwoni, im new to this forum and I just collected my ride 3 weeks ago. How much u pay for your body kit? Its great looking
From what I can see in the showroom car, the SX comes with both front passenger and driver ventilated (air con) seats.
�
The flexsteer button also relocated to beside the gearshift, instead of on the steering wheel in the current models.
�
Otherwise, visually, I do not see any difference in the cabin.
�
Hmm.. No Eurostyle HU? No Body kit? No sunroof? No HID? �the lamps and bumper are cosmetic changes only.. but the passenger aircon is a new value add addition..�
�
What is flexsteer? Maybe i dont use it so i didnt notice it on my steering wheel...
�
Seems like just a face-lift with no (almost) value add...
Hmm.. No Eurostyle HU? No Body kit? No sunroof? No HID? �the lamps and bumper are cosmetic changes only.. but the passenger aircon is a new value add addition..�
�
What is flexsteer? Maybe i dont use it so i didnt notice it on my steering wheel...
�
Seems like just a face-lift with no (almost) value add...
�
The showroom car did not come with a sunroof.
�
No bodykit. I can't recall the HU though. It might be the touchscreen one.
�
Not sure if HID or halogen, did not ask the SE.
�
Flexsteer is the function where you can vary the "heaviness" of your steering wheel. Sport, Comfort or Normal. I don't use it much too, usually keep it in Normal mode.
Oh yes, and a flat bottom "sporty" looking steering wheel.
What are the new stuff in FL?
�
I have seen the FL at C&C ubi 2 week ago. SE started the engine and the seat is ventilated with cool air. compare with the brother (HE) look like slightly more quality. side door is all soft touch. But dont come with LCD ICE but SE say can be upgrade to LCD.
Attached Thumbnails
The showroom car did not come with a sunroof.
�
No bodykit. I can't recall the HU though. It might be the touchscreen one.
�
Not sure if HID or halogen, did not ask the SE.
�
Flexsteer is the function where you can vary the "heaviness" of your steering wheel. Sport, Comfort or Normal. I don't use it much too, usually keep it in Normal mode.
Oh yes, and a flat bottom "sporty" looking steering wheel.
�
ahh.. OK,, the steering heaviness.. Yup, kept it at normal...
�
Thanks for the details...
looks like HID
I have seen the FL at C&C ubi 2 week ago. SE started the engine and the seat is ventilated with cool air. compare with the brother (HE) look like slightly more quality. side door is all soft touch. But dont come with LCD ICE but SE say can be upgrade to LCD.
�
Thanks for the pics.. only bumper changed.. and the tail lights...
�
Now same price as when I bought my SX Sports.. but my COE higher..�
�
What is LCD ICE? The Eurostyle HU? Last time was free upgrade, now like need to pay to upgrade?
�
Ahhh.. you're right.. i took the row of stop lights as the night light when the head light is on... yes.. our full circle one is nicer...
�
New FL version not superior to our SX and SX Sports, no?�
![[:p]](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_uLQCsuMtb1m-ocBbGBGLJcQ7BYw912jipESKF-3hL3tM4AhnN9EUmB124kanyw7p34kLliKnTWHp90AN1ftxn7MmhPe7kx8PswtCHUOpNjpREdR8q2f2YcaUntYyFC9aLMYXGKr3c=s0-d)
Put the connector inside first before screwing the bulb in. But the heatsink requires ventilation to cool down, if cover back not advisable. But if don't cover water might get in.And with led bulb longer than usual bulb with the driver as well, we wun e able to twist the connector back to the slot. So we leave it hanging?
Nice Ric! May I know which carpark is this?
�
thanks! this is at redhill road
Nice leh. Where u bought your bodykit?
�
at a neighbourhood shop near leng kee, lengkok bahru there. pm if u really want to do.
�
the same kit will be probably 1/3 cheaper if u do it in JB
Sibei swee bro. Like your photography skill.
�
thanks!
And with led bulb longer than usual bulb with the driver as well, we wun e able to twist the connector back to the slot. So we leave it hanging?
�
with the LED you ordered with the driver built in behind, may have to leave it hanging, unless you buy a spare cover for china's K3 which has slightly more space.
�
for mine it fits perfectly with the cover on.
Put the connector inside first before screwing the bulb in. But the heatsink requires ventilation to cool down, if cover back not advisable. But if don't cover water might get in.
�
can get a spare cover and drill some holes for hot air to escape.
�
however the engine bay is just as hot, if not hotter than the heat from the led bulb.
thanks! this is at redhill road
�
at a neighbourhood shop near leng kee, lengkok bahru there. pm if u really want to do.
�
the same kit will be probably 1/3 cheaper if u do it in JB
�
thanks!
�
with the LED you ordered with the driver built in behind, may have to leave it hanging, unless you buy a spare cover for china's K3 which has slightly more space.
�
for mine it fits perfectly with the cover on.
�
can get a spare cover and drill some holes for hot air to escape.
�
however the engine bay is just as hot, if not hotter than the heat from the led bulb.
im not refering to the headlamp cover but the power connector behind the bulb. We twist it anti clockwise to take the bulb with the connector out. When we install the LED bulb, i suppose we use the LED bulb's ring to hold the bulb in place since we cannot use the original power connector to hold it in place due to the length of the bulb with heatsink
im not refering to the headlamp cover but the power connector behind the bulb. We twist it anti clockwise to take the bulb with the connector out. When we install the LED bulb, i suppose we use the LED bulb's ring to hold the bulb in place since we cannot use the original power connector to hold it in place due to the length of the bulb with heatsink
�
the cable with the 2 prongs from your LED bulb plugs into that original connector.
�
you can order an adaptor to hold the bulb in place, basically a replacement for the plastic part of the connector that is attached to your led bulb.
�
for me i used the original cover to hold everything in place nicely.
Cool. How much u bought ? With HID lights?Anyone collecting the facelift k3 soon. Dealer say LTA approved Liao. COE secured Liao. Now see when I want go register
the cable with the 2 prongs from your LED bulb plugs into that original connector.
�
you can order an adaptor to hold the bulb in place, basically a replacement for the plastic part of the connector that is attached to your led bulb.
�
for me i used the original cover to hold everything in place nicely.
meaning the bulb goes very deep in since u have to�
�
bulb -> driver -> stock power connector then twist the stock power connector clockwise to lock it into the hole -> headlamp cover
Facelift K3Dear fellow K3 owners, I just collected my ride 3 weeks ago. Nice to know there's a dedicated discussion group here.
Facelift K3
No mine is the SX. Don't intend to wait for the new FL as I find the pre-FL version is nicer especially the fog lamp design.
Congrats bro. Fog lamp change to white LED lagi nice. The stock yellow abit turned off.No mine is the SX. Don't intend to wait for the new FL as I find the pre-FL version is nicer especially the fog lamp design.
Congrats bro. Fog lamp change to white LED lagi nice. The stock yellow abit turned off.
Thanks bro. Overall still pretty ok for me lah. Trying not to spend too much on any addition/alteration. The next thing to install is the Eurostyle head unit which C&C still owe me.
C&C did not polish the car well , maybe this is not their forte and they have hundreds of cars to polish for car delivery. It's very obvious on black cars , adhesive stains left by protection sheets during car shipment. I also paid to do Zertona PPS but the adhesive stains was not removed and PPS applied to have patchy effect. All these was rectified when I went to CS-2 for PPS. it was then a perfect paintwork
To me it was a regret to take up Zertona from C&C and happy that I did CS-2.
It doesn't matter if you park under shade most of the time. A good PPS is to give a more intense and even colour , better protection against dirt and rain, better hydrophobic effect. I have not washed my car for one week after all the rain and shine daily. And it's still clean and glossy with no dirt and water marks.
Bro, I did mine with C&C too n also realised their job not so good. Is it ok to redo PPS again at another place? Any good n not to expensive place to recommend?
Bro, I did mine with C&C too n also realised their job not so good. Is it ok to redo PPS again at another place? Any good n not to expensive place to recommend?
Yes it is ok to redo PPS provided the person knows how to remove the existing coat. I did mine at CS-2 for $1082 for Titanium coating.
Thanks bro. Overall still pretty ok for me lah. Trying not to spend too much on any addition/alteration. The next thing to install is the Eurostyle head unit which C&C still owe me.
Haha at first I have the same mindset as you. But changed tyres, PPS, ice, lights, horns.
Yes it is ok to redo PPS provided the person knows how to remove the existing coat. I did mine at CS-2 for $1082 for Titanium coating.
Haha at first I have the same mindset as you. But changed tyres, PPS, ice, lights, horns.
Wow! That's quite an investment bro! So far I installed the dash cam n now left with the head unit. Now considering redo the PPS. Also thought of changing the rear view mirror to the electrochromic type. Any kang tao?
Wow! That's quite an investment bro! So far I installed the dash cam n now left with the head unit. Now considering redo the PPS. Also thought of changing the rear view mirror to the electrochromic type. Any kang tao?
You're right PPS is an investment. It provides better intense colour , better shine, better hydrophobic, more resistance to dirt and water marks. The mirror I not sure, but no need one lah. For auto dimming ? Our rear tint is quite dark already.
Wow! That's quite an investment bro! So far I installed the dash cam n now left with the head unit. Now considering redo the PPS. Also thought of changing the rear view mirror to the electrochromic type. Any kang tao?
isnt the stock mirror electrochromic? mine came stock with it but i changed to eurostyle from C&C so its in my storeroom.
meaning the bulb goes very deep in since u have to�
�
bulb -> driver -> stock power connector then twist the stock power connector clockwise to lock it into the hole -> headlamp cover
the led bulb come with the shape to clip the bulb in place so leave the original power cable hanging. Was surfing earlier and saw tao bao, 28 bucks for a set of Cree LED from tao bao lol. cheap. The one I got earlier is almost 80 bucks.
Hi!
I booked my K3 EX on 24 May through SE Cheng at Ubi. Collected the car on 27 June 16 with following defects and outstanding items:-
1) steering wheel not properly aligned with�more than�15 degree slanted;
2) 16" sports�rim not installed until today no�delivery date;
3) Eurostyle multi media not installed;
4) scratches on left rear window;
�
Made appointment the next day after collection to align�he steering wheel and need to left the car at Ubi service centre �for half a day. BUT�the steering wheel still not properly aligned. SE Cheng told me it is "Common"�to delver a new car with�steering wheel not properly aligned. New K3 owners do�take note and check before sign.
�
Don't understand why such a�delay in delivery? And�why C&C Management still allow delivery with above outstanding items and major defects.
�
��
My steering alignment ok leh. Hmm usually alignment only takes few mins to adjust. Unless yours is something more serious that causes the alignment issue.Hi!
I booked my K3 EX on 24 May through SE Cheng at Ubi. Collected the car on 27 June 16 with following defects and outstanding items:-
1) steering wheel not properly aligned with more than 15 degree slanted;
2) 16" sports rim not installed until today no delivery date;
3) Eurostyle multi media not installed;
4) scratches on left rear window;
Made appointment the next day after collection to align he steering wheel and need to left the car at Ubi service centre for half a day. BUT the steering wheel still not properly aligned. SE Cheng told me it is "Common" to delver a new car with steering wheel not properly aligned. New K3 owners do take note and check before sign.
Don't understand why such a delay in delivery? And why C&C Management still allow delivery with above outstanding items and major defects.
Bro I think it's better that u lodge a complain with Leng Kee. Ubi side cmi one.My steering alignment ok leh. Hmm usually alignment only takes few mins to adjust. Unless yours is something more serious that causes the alignment issue.
Hi!
I booked my K3 EX on 24 May through SE Cheng at Ubi. Collected the car on 27 June 16 with following defects and outstanding items:-
1) steering wheel not properly aligned with�more than�15 degree slanted;
2) 16" sports�rim not installed until today no�delivery date;
3) Eurostyle multi media not installed;
4) scratches on left rear window;
�
Made appointment the next day after collection to align�he steering wheel and need to left the car at Ubi service centre �for half a day. BUT�the steering wheel still not properly aligned. SE Cheng told me it is "Common"�to delver a new car with�steering wheel not properly aligned. New K3 owners do�take note and check before sign.
�
Don't understand why such a�delay in delivery? And�why C&C Management still allow delivery with above outstanding items and major defects.
�
Congrats.
�
Seems your car has more defects then mine. That time when I collect only noted the chrome grille got chip off damage but was replaced. The paint work on the hood has some clear coat spider crack also rectified.
�
Another thing which most may neglect is the paint work and interior plastic trim. I noted that my a pillar interior plastic has one spot off shade but nothing to complain so leave it.
�
Steering wheel slanted as normal? I do not think is normal.
This is not bodykit. It's a rubber lip. U can Google Samurai Lip onlineHi bro Kwoni, im new to this forum and I just collected my ride 3 weeks ago. How much u pay for your body kit? Its great looking
Hi!
I booked my K3 EX on 24 May through SE Cheng at Ubi. Collected the car on 27 June 16 with following defects and outstanding items:-
1) steering wheel not properly aligned with�more than�15 degree slanted;
2) 16" sports�rim not installed until today no�delivery date;
3) Eurostyle multi media not installed;
4) scratches on left rear window;
�
Made appointment the next day after collection to align�he steering wheel and need to left the car at Ubi service centre �for half a day. BUT�the steering wheel still not properly aligned. SE Cheng told me it is "Common"�to delver a new car with�steering wheel not properly aligned. New K3 owners do�take note and check before sign.
�
Don't understand why such a�delay in delivery? And�why C&C Management still allow delivery with above outstanding items and major defects.
�
Wow, that's quite bad for a delivery. Even the 16" sports rims are not available? I thought they were factory fitted.
�
15 degree slanted is quite a lot.
You have to make a big complain to Leng Kee. Write in to complain. It's not good for a brand new car to go in workshop the next day. Demand for compensation. If you are hard enough they will.Hi!
I booked my K3 EX on 24 May through SE Cheng at Ubi. Collected the car on 27 June 16 with following defects and outstanding items:-
1) steering wheel not properly aligned with more than 15 degree slanted;
2) 16" sports rim not installed until today no delivery date;
3) Eurostyle multi media not installed;
4) scratches on left rear window;
Made appointment the next day after collection to align he steering wheel and need to left the car at Ubi service centre for half a day. BUT the steering wheel still not properly aligned. SE Cheng told me it is "Common" to delver a new car with steering wheel not properly aligned. New K3 owners do take note and check before sign.
Don't understand why such a delay in delivery? And why C&C Management still allow delivery with above outstanding items and major defects.
He shouldn't hv taken the car in the first place.. just walk away until they rectify the fault n install all that's missing.. everyday they hold the new car is $50 storage cost for the SE..So talk to SE to clear this mess, as its in their self interest to clear the car n avoid the storage cost.. if take too long can ask for courtesy car if old car traded in Liao..You have to make a big complain to Leng Kee. Write in to complain. It's not good for a brand new car to go in workshop the next day. Demand for compensation. If you are hard enough they will.
Dun take first when got fault then got to go to n fro into workshop ding dong to repair so many times, unless you too free la or love kia showroom free kopi.. lol...
Edited by Lurpsexx, 10 July 2016 - 10:39 PM.
Dear all, I have received my K3 SX in June. It is a comfortable ride. Just wondering whether switching to the Comfort mode will help to improve the FC. Before running in, my FC was 10.6km per litre. After the recent 1000km servicing, it has worsen to 9.7km per litre. Still monitoring and thinking whether the FC was due to the heavy body. 60% expressway and 40 % normal road.
Flex steer is steering feel, shld not affect fuel consumption.im almost 9 mths now, n fuel consumption still 8.2l per 100km.. shld be ur heavy foot ba.. our k3 all same weight! Same 70% highway,30% roadDear all, I have received my K3 SX in June. It is a comfortable ride. Just wondering whether switching to the Comfort mode will help to improve the FC. Before running in, my FC was 10.6km per litre. After the recent 1000km servicing, it has worsen to 9.7km per litre. Still monitoring and thinking whether the FC was due to the heavy body. 60% expressway and 40 % normal road.
Thanks bro for your prompt reply. I am pumping Esso 5000 :)
N I Spc 95..not fuel la.. just keep rev abt 2k n dun fly off at traffic light..see got lesser fuel used or not.. enjoy the ride, dun worry so much abt the petrol la..Thanks bro for your prompt reply. I am pumping Esso 5000 :)
I'm on Esso 95 sometimes 98. Getting 9.7L/100km for 80% city and 20% highway. Not light foot though.Dear all, I have received my K3 SX in June. It is a comfortable ride. Just wondering whether switching to the Comfort mode will help to improve the FC. Before running in, my FC was 10.6km per litre. After the recent 1000km servicing, it has worsen to 9.7km per litre. Still monitoring and thinking whether the FC was due to the heavy body. 60% expressway and 40 % normal road.
Check your tyre pressure and pump up to 34-35psi. Cannot 32psi.
He shouldn't hv taken the car in the first place.. just walk away until they rectify the fault n install all that's missing.. everyday they hold the new car is $50 storage cost for the SE..So talk to SE to clear this mess, as its in their self interest to clear the car n avoid the storage cost.. if take too long can ask for courtesy car if old car traded in Liao..
Dun take first when got fault then got to go to n fro into workshop ding dong to repair so many times, unless you too free la or love kia showroom free kopi.. lol...
actually as long as no major problem can drive the car off la, they likely wun gif u any courtesy car and u gonna have to go public. For alignment, if can do on the spot ask them do, else I would go outside. I let C&C do my alignment and cmi. I went out to rectify myself, save the trouble. Send in for servicing and rectify in morning, only receive the car around 4-5PM, by the time you reach C&C the mechanic siew gang already and you realise problem still there. Outside rectify 5mins job. swee swee bello.
actually as long as no major problem can drive the car off la, they likely wun gif u any courtesy car and u gonna have to go public. For alignment, if can do on the spot ask them do, else I would go outside. I let C&C do my alignment and cmi. I went out to rectify myself, save the trouble. Send in for servicing and rectify in morning, only receive the car around 4-5PM, by the time you reach C&C the mechanic siew gang already and you realise problem still there. Outside rectify 5mins job. swee swee bello.
�
We buy new car of course expect no faults, what for take liao still trouble ourselves to go outside and resolve? �Cost me my money & time wasted.. then I might as well buy cheaper used car....�
�
If you choose to pung chance, then dun come back and comprain liao.. bec we gave C&C the legal way to wiggle out of their faults...
�
There are quite a few K3 owners here, and this is the rare time that I hear of such shoddy new car setup..
We buy new car of course expect no faults, what for take liao still trouble ourselves to go outside and resolve? �Cost me my money & time wasted.. then I might as well buy cheaper used car....�
�
If you choose to pung chance, then dun come back and comprain liao.. bec we gave C&C the legal way to wiggle out of their faults...
�
There are quite a few K3 owners here, and this is the rare time that I hear of such shoddy new car setup..
1. Buying new or old, we all expect no fault.
�
2. Cos I find my time more valuable than the $30 spent to rectify a alignment problem which I doubt they have a proper wheel/steering alignment equipment. By sending back and only collecting after work, even if u realise there is a problem, you can at most speak to the guard cos he is the only person left by 7PM.
�
3. Used car is cheaper but not exactly no problem or cheaper in depre.�
�
4. Pung chance I assume is collect the vehicle and accept the problem. What I am referring to now is collect the vehicle and note the problems. Rectify on your next servicing which is 1k in this case since it's new. Leaving the car inside, you still pay for the roadtax, insurance and COE since it's already registered under you by the time you can collect. If the problem isnt major, I would think it's logical to collect and rectify later.
�
My views tho�
![[laugh]](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_ugtr6gK3yZERE9iutVh7jVNDGQ0VZyaL68vfKhHF_1W2uqiGYdAkanAuULn6BPq1p4L8g1fxB4BIPiO6Ih8yZvWIkhjImWuv_7O-ODnJRe3hAf5T-TLgn7jT4_FGMPr8kZtC1U6w=s0-d)
Edited by Enzomatrix, 11 July 2016 - 02:59 PM.
End of day, new car expectation higher than old..if ur talking abt wheel alignment, then of course not bao under c&c la..I tot u were talking abt steering wheel alignment..lol.. when I got my new car, I expect it to be problem free n I can enjoy my new ride to the max, n not have a lingering gnawing thought tat I still hv something left to goto c&c to fix later..k3 is a well built car, n so far so good, but to know that my new ride has problems on day 1 just doesn't cut it with me..1. Buying new or old, we all expect no fault.
2. Cos I find my time more valuable than the $30 spent to rectify a alignment problem which I doubt they have a proper wheel/steering alignment equipment. By sending back and only collecting after work, even if u realise there is a problem, you can at most speak to the guard cos he is the only person left by 7PM.
3. Used car is cheaper but not exactly no problem or cheaper in depre.
4. Pung chance I assume is collect the vehicle and accept the problem. What I am referring to now is collect the vehicle and note the problems. Rectify on your next servicing which is 1k in this case since it's new. Leaving the car inside, you still pay for the roadtax, insurance and COE since it's already registered under you by the time you can collect. If the problem isnt major, I would think it's logical to collect and rectify later.
My views tho
Just complain and demand them to fix it and ask for compensation. Don't talk to service Advisors. Not use one. Write in email to complain.End of day, new car expectation higher than old..if ur talking abt wheel alignment, then of course not bao under c&c la..I tot u were talking abt steering wheel alignment..lol.. when I got my new car, I expect it to be problem free n I can enjoy my new ride to the max, n not have a lingering gnawing thought tat I still hv something left to goto c&c to fix later..k3 is a well built car, n so far so good, but to know that my new ride has problems on day 1 just doesn't cut it with me..
End of day, new car expectation higher than old..if ur talking abt wheel alignment, then of course not bao under c&c la..I tot u were talking abt steering wheel alignment..lol.. when I got my new car, I expect it to be problem free n I can enjoy my new ride to the max, n not have a lingering gnawing thought tat I still hv something left to goto c&c to fix later..k3 is a well built car, n so far so good, but to know that my new ride has problems on day 1 just doesn't cut it with me..
i have both steering and wheel alignment. Both they couldnt do properly la.
�
K3 is well built but not without problems.
�
I have encountered cruise control panel issues - panel changed
Car unable to start in P, only in N. In P no crank. Left the car there and all they can tell me is computer say no problem. Until I troubleshoot myself and changed car batt which didnt solve it and changed keyfod batt which solved the problem. Imagine the number of times I left the car there to resolve. Infact left overnight.
�
Now my aircon upon startup, it seems to keep changing mode itself that I hear the mode changing sound like some DJ jamming in the aircon. - Will resolve on next servicing.
�
Problem when you have too many electronics.
�
When I get my new car, I also want it to be perfect, but most of the time it isn't. I had bubbles on my solar film and paint defects. If I tell them to resolve it, they also can't do it on the same day. Took the car and send in during servicing to resolve together. I would prefer to spend lesser time and do everything together if possible cos Im not very confident in their mechanics but I had $1k servicing credit then. Now that the credit is used up, Im gonna do it elsewhere.
guys, what's the air pressure for our 17 inch tyre ya?
�
is it 32 psi as per indicated?
�
�
guys, what's the air pressure for our 17 inch tyre ya?
�
is it 32 psi as per indicated?
i dun use psi but i usually pump ard 250. I believe the recommended is paste on the side of the driver's door edge.
Yes 32 psi, but I feel that tyres side walls sagged and car lost power. So pumped to 35psi but ride is too bumpy. So now keep at 34psi.guys, what's the air pressure for our 17 inch tyre ya?
is it 32 psi as per indicated?
Hi!
I booked my K3 EX on 24 May through SE Cheng at Ubi. Collected the car on 27 June 16 with following defects and outstanding items:-
1) steering wheel not properly aligned with�more than�15 degree slanted;
2) 16" sports�rim not installed until today no�delivery date;
3) Eurostyle multi media not installed;
4) scratches on left rear window;
�
Made appointment the next day after collection to align�he steering wheel and need to left the car at Ubi service centre �for half a day. BUT�the steering wheel still not properly aligned. SE Cheng told me it is "Common"�to delver a new car with�steering wheel not properly aligned. New K3 owners do�take note and check before sign.
�
Don't understand why such a�delay in delivery? And�why C&C Management still allow delivery with above outstanding items and major defects.
Did you ask the SE to record down the defects and when it is due for rectification?
When I collected my car, I got some paint work issue at the bonnet/boot/rear bumper.
And the gap between my fender/bonnet/door is uneven on both side.�
My SE was quite steady. He called 1 of the car collection ctr personnel to come and take a look also and they agreed they should rectify it. So they recorded it on my collection slip and true enough, we arranged for it to be rectified the next week. I needed the car that week so I just collected it first.
And they gave me a courtesy car also. Kia Sportage.�
Maybe cos my car took almost a week to be rectified.�
The first paint rectification came back with paint chip. So they resprayed and ask me to check until I am completely satisfied before releasing the car back to me.
Maybe I am just lucky that the service ctr ppl are nice.
Wa, suay Sia..ur problems macham like lemon car leh.. e majority of k3 owners here not so Terok as ur case.. best u escalate to GM c&c, as this car is clearly not up to std, n no fault on ur part..like u said, the c&c workshop people also dun where wrong, speaks volumes about their capabilities.. think u spent lotsa time, running ard n $$$ to solve all your problems.. all the best to you man..i have both steering and wheel alignment. Both they couldnt do properly la.
K3 is well built but not without problems.
I have encountered cruise control panel issues - panel changed
Car unable to start in P, only in N. In P no crank. Left the car there and all they can tell me is computer say no problem. Until I troubleshoot myself and changed car batt which didnt solve it and changed keyfod batt which solved the problem. Imagine the number of times I left the car there to resolve. Infact left overnight.
Now my aircon upon startup, it seems to keep changing mode itself that I hear the mode changing sound like some DJ jamming in the aircon. - Will resolve on next servicing.
Problem when you have too many electronics.
When I get my new car, I also want it to be perfect, but most of the time it isn't. I had bubbles on my solar film and paint defects. If I tell them to resolve it, they also can't do it on the same day. Took the car and send in during servicing to resolve together. I would prefer to spend lesser time and do everything together if possible cos Im not very confident in their mechanics but I had $1k servicing credit then. Now that the credit is used up, Im gonna do it elsewhere.
Wa, yr case is damn heng leh.. everything soon soon n resolved to ur satisfaction.. who is ur SE? He deserves a Tiger!Did you ask the SE to record down the defects and when it is due for rectification?
When I collected my car, I got some paint work issue at the bonnet/boot/rear bumper.
And the gap between my fender/bonnet/door is uneven on both side.
My SE was quite steady. He called 1 of the car collection ctr personnel to come and take a look also and they agreed they should rectify it. So they recorded it on my collection slip and true enough, we arranged for it to be rectified the next week. I needed the car that week so I just collected it first.
And they gave me a courtesy car also. Kia Sportage.
Maybe cos my car took almost a week to be rectified.
The first paint rectification came back with paint chip. So they resprayed and ask me to check until I am completely satisfied before releasing the car back to me.
Maybe I am just lucky that the service ctr ppl are nice.
Wah fierce bro. 95 & 92 price difference not much. Only about $2 per tank.
How about your tyre pressure ?
our car is able to take in minimum RON 91. No point let the petrol coy earn more when we pump more than we need. I tried higher RON b4, I didnt felt any significant difference so I just use 92. Same goes for my previous cars and they were all still in good condition when traded in�
I think the minimum required for our engine is 95.
�
Does 98 give better FC since it burns cleaner and perhaps more effective?
�
I am on SPC 95 and my FC never got better than 8.9 L/100km.
its 92. U can check the manual. Minimum is 91.
Bro, manual stated min AKI91, which is the measurement unit used in USA. In Asia we use RON. AKI91 = RON95. Don't see number only all same lol.. 91cm & 91inch & 91feet all different. Lol.our car is able to take in minimum RON 91. No point let the petrol coy earn more when we pump more than we need. I tried higher RON b4, I didnt felt any significant difference so I just use 92. Same goes for my previous cars and they were all still in good condition when traded in
its 92. U can check the manual. Minimum is 91.
Bro, manual stated min AKI91, which is the measurement unit used in USA. In Asia we use RON. AKI91 = RON95. Don't see number only all same lol.. 91cm & 91inch & 91feet all different. Lol.
�
�
Bro, trust me, I know what I'm doing. U guys got cheated for so many years lol.
�
It reads RON 91 unless we are toking about different car. �I'm driving a K3 bro :)
�
Edited by Enzomatrix, 16 July 2016 - 01:07 PM.
Actually what fuel also same, as long car can move. But end of day 98 burns cleaner, in years to come engine will be cleaner as it has double the cleaning agents. Just like engine oil mah, no matter Motul or Shell, can feel it while driving. But many still prefers Motul. Lol.Bro, trust me, I know what I'm doing. U guys got cheated for so many years lol.
It reads RON 91 unless we are toking about different car. I'm driving a K3 bro :)
Actually what fuel also same, as long car can move. But end of day 98 burns cleaner, in years to come engine will be cleaner as it has double the cleaning agents. Just like engine oil mah, no matter Motul or Shell, can feel it while driving. But many still prefers Motul. Lol.
Well that's a different topic altogether. Like I mentioned some ppl can feel the difference but I don't so Im fine with 92.
�
But I definitely can differentiate 92CM 92INCH 92M :)�
To be honest, don't be too bothered about fuel consumption.
When I collected my car in dec 15, I was having an unhealthy obsession with the fuel consumption. When I can't get anything better than 12km/lit, I will keep thinking my car got problem.
After awhile, I start to ignore the fuel consumption and start to enjoy driving the car.�
Fuel consumption all boils down to a few factors.
Heavy/Light Footer - When I was heavy footer, I can only get 8km/lit. Thats when I was using the shift-tronic and revving to 6k rpm at every gear change. When I was light footer, I can get 12-14km/lit. Light footer is rpm less than 3k.
Road condition - The percentage of highway you travel on and traffic jam�makes a VERY big difference. During my normal day to day work, I go 70% city/30% highway + plus jam. So I get about 11km/lit. Got 1 month I had to travel to a new work place at 6am everyday. 70% highway/30%city plus no jam. I get 16km/lit. Even better than manufacturer spec.
And regarding different RON type, last time I did an excel sheet to track the difference in price and fuel consumption. I concluded that the difference is insignificant. So don't worry about it too much.
What is wrong with our car FC? Is it the engine ? Or car is heavier.To be honest, don't be too bothered about fuel consumption.
When I collected my car in dec 15, I was having an unhealthy obsession with the fuel consumption. When I can't get anything better than 12km/lit, I will keep thinking my car got problem.
After awhile, I start to ignore the fuel consumption and start to enjoy driving the car.
Fuel consumption all boils down to a few factors.
Heavy/Light Footer - When I was heavy footer, I can only get 8km/lit. Thats when I was using the shift-tronic and revving to 6k rpm at every gear change. When I was light footer, I can get 12-14km/lit. Light footer is rpm less than 3k.
Road condition - The percentage of highway you travel on and traffic jam makes a VERY big difference. During my normal day to day work, I go 70% city/30% highway + plus jam. So I get about 11km/lit. Got 1 month I had to travel to a new work place at 6am everyday. 70% highway/30%city plus no jam. I get 16km/lit. Even better than manufacturer spec.
And regarding different RON type, last time I did an excel sheet to track the difference in price and fuel consumption. I concluded that the difference is insignificant. So don't worry about it too much.
What is wrong with our car FC? Is it the engine ? Or car is heavier.
�
There's absolutely nothing wrong... it's on par with all other makes...
Well that's a different topic altogether. Like I mentioned some ppl can feel the difference but I don't so Im fine with 92.
�
But I definitely can differentiate 92CM 92INCH 92M :)�
+5.. cant upz u so fast...
There's absolutely nothing wrong... it's on par with all other makes...
�
Yup, once past 10K km, "feels" more powerful.. pulls faster...�
+5.. cant upz u so fast...
�
Yup, once past 10K km, "feels" more powerful.. pulls faster...�
Thanks bro.
�
After 10k km, leg got heavier�
Show some pics when they arrive! Hiw many watts n lumens?
�
bulb arrived. 40W, 4800Lumens.
�
White and Bright. But I can't install it properly yet. It is the heat strip type and the vendor showed 22mm for the heatsink which isnt the case. I cant fit the dust cover back as it is slightly too long. Will have to buy a spare dust cover to cut it.
�
2nd, it doesn't come with the bulb adapter to hold the bulb in place since we cannot use the original one to hold the LED in place.
�
It's either I drill the hole on the dust cover for the heatsink and strip to come out then it should likely hold it in place or I get a additional adapter to clip it in place and drill hole on dust cover to put the cover back.�
Don't think it's on par bro. My friend's Mazda 3 has much better FC. Average 14-15km/L. Even on city driving without using Start Stop. Just imagine if he uses Start Stop.There's absolutely nothing wrong... it's on par with all other makes...
Thanks bro.
�
After 10k km, leg got heavier�
�
haha, ya, but once put the foot down, the car seem livelier... and can overtake a bit better now... didn't have to use the shift paddle at all...
haha, ya, but once put the foot down, the car seem livelier... and can overtake a bit better now... didn't have to use the shift paddle at all...
that one when hand itchy nothing to do can try la or at bends, its just an accessory to me. Hardly used but if they give more equipment with the car, y not. the more the merrier.� ![[drivingcar]](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_tXr5-XwtWV-2JANelnCHqNH-VEi_dD3npQu4j88jWy_7DF167I0BLAvdbrULCum3H9TROghzXP_LGHK28m5Cf9FCCsTfW_mJlM0GekQ3vstVI5d1O-scUH0rMOFfd4u_Mf5hiIGBxgx8a_=s0-d)
Don't think it's on par bro. My friend's Mazda 3 has much better FC. Average 14-15km/L. Even on city driving without using Start Stop. Just imagine if he uses Start Stop.
�
Hmmm.. there's been quite a few posts on FC here.. and my own take is that if FC is impt to these bros, perhaps they can look at diesels.. if we looked at petrol cars, then hv to be prepared the FC is poorer.. compare petrol car's FC among the different makes may show up some differences, but on the whole if compare petrol cars to diesels on FC, then diesels will win hands down...�
�
Just enjoy the ride, and petrol cars do ride smoother and quieter (doesn't sound like a sonata taxi!) than diesels.... just a little bit more ex on petrol thats all...�
that one when hand itchy nothing to do can try la or at bends, its just an accessory to me. Hardly used but if they give more equipment with the car, y not. the more the merrier.�
�
ya, tried once.. works well.. but unnecessary for me.. the auto gear shifts are good enuf... slow and steady for me!�
Any Bros using the freebie Thinkware F50? I tried to download a video clip into PC but unable to play. Only can view from the Thinkware viewer.
�
What's the file's extension? If it's a proprietary format then you can only use the Thinkware viewer. But I think most cameras now save in MP4 formats right?
What's the file's extension? If it's a proprietary format then you can only use the Thinkware viewer. But I think most cameras now save in MP4 formats right?
Thinkware saves in avi format. So I have to convert it to MP4. Just tried
Hello all k3 owners, if replace wheels, tyres and brake pads outside workshop will it affect the warranty?
Edited by k3k3k3, 17 July 2016 - 01:20 PM.
Hello all k3 owners, if replace wheels, tyres and brake pads outside workshop will it affect the warranty?
Only affects your warranty for brakes. What brake pads u buying ? Stock brake pads not bad mah, quiet. Most aftermarket pads will produce grinding noise.
Không có nhận xét nào:
Đăng nhận xét