Saw 2 vezels today. 1 silver coloured in MSCP near bedok block 216 hawker centre driven by a Sis at 9am, and another white one at the junction in front of Temasek JC at 3pm.�
Bro... These are stuffs to take note
Headunit (min avh2650bt)
Steering audio control (X model and above)
Leather seats
Vezel floor mat
Solar film
Window visors
Front and reverse sensors (comes with reverse cam)
Front and back cameras
GPS
Boot tonneau cover
Vezel boot mat
Bro, thanks for the info.
Definitely need to have good bargaining skill to get all those.
Not me bro. I was running all over SG to promote vezel. Was in tampines, sembawang, bukit merah,Bro... These are stuffs to take note
Headunit (min avh2650bt)
Steering audio control (X model and above)
Leather seats
Vezel floor mat
Solar film
Window visors
Front and reverse sensors (comes with reverse cam)
Front and back cameras
GPS
Boot tonneau cover
Vezel boot mat
Free servicing
Punggol plaza? Could be it bro dino? :)
I saw a black one at punggol spectra just now
bedok, back to tampines before reaching home. Later going sembawang again.
Meet bro Chanlccs to collect the boot mat he help buy for me. Fit nicely. Thanks bro.
Saw 2 vezels today. 1 silver coloured in MSCP near bedok block 216 hawker centre driven by a Sis at 9am, and another white one at the junction in front of Temasek JC at 3pm.�
Could be me bro. Was in bedok about that time.
Edited by Dino-Lee, 07 February 2015 - 04:47 PM.
Hi Guys and Gals,
�
Anyone knows where to buy the Hard Tonneau Cover for the Vezel? preferably a place with ex stock.
�
Thanks alot
K
Right now still not much accessories can be found ex stock. Mostly buy from toaboa. My HU installer did bring some from Taiwan; visor, side step ... etc, but limited quantity. Company name is Link Auto Accessories, call Chong 9666 7469 if u wish to enquire more.
�
�
Did my 3x coats at ceramic pro for about $1250 on 15Jan. After 3 weeks of torture under the weather, water is still beading on the coating; not just the car body, but also the windscreen. Rain drops practically fly off the coating surface when strong wind blows at it. Tyres are still shiny and rims are still free of brake dust. What do you think?
�
Ps: I am not affiliated to ceramic pro in any way. Just my personal observation on the coating applied to my car.
I did mine end Nov 14. Results is the same as yours and still very good condition. Easy washing as well.
I went to do this in less than 30 days after getting car, so my warranty is 10 years ... But am being realistic, if can last for 5 years very good alri. The only 1 thing that I dislike is the coating on windscreen. It makes the wiper jerk if small amount of rain/water.
Right now still not much accessories can be found ex stock. Mostly buy from toaboa. My HU installer did bring some from Taiwan; visor, side step ... etc, but limited quantity. Company name is Link Auto Accessories, call Chong 9666 7469 if u wish to enquire more.
Bro Dino, how much is the booth mat u paid? I tot to go Msia 6o custom made it. If cost here is reasonable, i will save all the hassel and just get it here. Thanks!
Hi,
�
Will be getting my car nxt week. Like to check how do you guys disable the start/stop engine�function? And recommeded shops to get bodykits?
�
Regards
Zan
�
Btw, was waiting for someone to get back on this, why need to disable the start/stop engine function? anyone can elighten me?
Right now still not much accessories can be found ex stock. Mostly buy from toaboa. My HU installer did bring some from Taiwan; visor, side step ... etc, but limited quantity. Company name is Link Auto Accessories, call Chong 9666 7469 if u wish to enquire more.
Hi, bro...
U change your HU after getting the vezel?
Bro Dino, how much is the booth mat u paid? I tot to go Msia 6o custom made it. If cost here is reasonable, i will save all the hassel and just get it here. Thanks!
Hi sis, cost $25 buy fm taobao. I am lucky cos tumpang with other bro shipment. Because of the size, shipping cost may add up costing higher. Also depends on the quality you are after. As you know, dun expect too much from taobao.
Edited by Dino-Lee, 07 February 2015 - 07:16 PM.
Hi, bro...
U change your HU after getting the vezel?
I change before taking over my ride. SE introduce HU, solar film & Tyre WS before getting the car. Select, negotiated and fixed all before I take my car. I not expert in HU & chosen Kenwood base on ws advise. If I know earlier, I would hv selected pioneer.
Edited by Dino-Lee, 07 February 2015 - 07:18 PM.
Collected my ride from HUP Long today. Can add me to the list of collected Vezel. Pearl white X model. Thanks. Happy to catch up with fellow Vezel owners. Lionellimmh
Same same with me bro. My SE is Ray and got my ride end nov 2014. Welcome to the club.
I change before taking over my ride. SE introduce HU, solar film & Tyre WS before getting the car. Select, negotiated and fixed all before I take my car. I not expert in HU & chosen Kenwood base on ws advise. If I know earlier, I would hv selected pioneer.
Hi bro Dino,
Haha, me also a noob in HU... Seem like pioneer HU is a popular choice.
No experience in getting car from PI... So like to ask some more question..
Does you mean you pay on your own for the HU, solar film with additional to the car price.. How much?
If not convience to discuss about your package, can pm me.
Thanks a lot.
Edited by Credor, 07 February 2015 - 07:43 PM.
Btw, was waiting for someone to get back on this, why need to disable the start/stop engine function? anyone can elighten me?
Hi bro, this is a tough one. There were many theory and debate on this. Start/stop of course lower FC but not good for engine and battery. However theory behind is now days tech is cater for this. There are capacitor to store the power needed to run air con, HU ... etc during off engine. Also engine design has been change to withstand more start/stop.
As for me, I only fully depress the brake pedal to activate the start/stop when there is longer idling/stop time. If only short stop, I depress brake just enough stop the car from moving.
Hi sis, cost $25 buy fm taobao. I am lucky cos tumpang with other bro shipment. Because of the size, shipping cost may add up costing higher. Also depends on the quality you are after. As you know, dun expect too much from taobao.
$25 is cheap. I guessed any custom made locally will cost $100++.
Thanks for ur info
�
Btw, was waiting for someone to get back on this, why need to disable the start/stop engine function? anyone can elighten me?
Yup. Too many debates. But basically the eng start stop is different from a full crank of the engine hence the damage may be lesser, as according to some techies. But there is also a recent article last year which pit against this technology. Anyway this tech had been around for years. To me, i will simply try both. If the fuel efficiency savings is less than 10%, then I find it pointless to activate.
Yup. Too many debates. But basically the eng start stop is different from a full crank of the engine hence the damage may be lesser, as according to some techies. But there is also a recent article last year which pit against this technology. Anyway this tech had been around for years. To me, i will simply try both. If the fuel efficiency savings is less than 10%, then I find it pointless to activate.
�
Bro, so your opinion means I should use the start/stop engine or ? I still haven't get my car yet, so I just reading up on all of this theories u all put on this forum for reference.
Or should I just use the start/stop engine since it's already there for us to use?
Engine oil used sis?
Shell 5W40. It is not engine sound.Vibration during D mode when I stopped. Very irritating
By the way any bros warranty by Hitachi Capital? Any idea which WS they use?
Morpho Blue
Taffeta White
Alabaster Silver
Crystal Black
White orchid
Modern steel
Ruse black
Carnelian red
Anyone has or have plan to install strut bar? I have friends that ask me to do this to stabilize the car due to the higher CG. I am hesitating as I do not wish to alter the car stability.
Bro... How much?
Anyone has or have plan to install strut bar? I have friends that ask me to do this to stabilize the car due to the higher CG. I am hesitating as I do not wish to alter the car stability.
�
I haven't get my car yet as I will be getting it next week and I have plans to install strut bar.
Very very unlikely a w40 engine oil lead to vibrations
Very very unlikely a w40 engine oil lead to vibrations
You could meet a vezel owner or two to compare the vibration sound that you been experiencing.
my ride also had some vibration noise i thought was coming from my dashboard. guess what..it was actually my front recording camera vibrating. perhaps it was at its resonating frequency hence e larger resonance. used my fingers clamp it a while it stops.
Hmmm will try shell or esso for my next full tank and see how it goes. Currently using mobil 1 5w30 eo. Just to check eco mode on is when u see the green leaf on the display right?
Eco mode on = green leaf lights on. With Eco mode off, there is more power. Try it to feel the difference. Plan to switch off Eco mode when driving in Malaysia during the CNY, especially on highway for better over-taking.
Any bro or sis here used opti shine for glass/ceramic coat? Heard they use (diamond 9H) with 5 year warranty. How the result? any bro and sis can advice. Thanks
how much did they coat? i found 5 layers 9H ceramic $500 kangtao which i haggled for that offer. 5 yrs warranty with min $100 a year "servicing" somehow i dun mind that $100 a yr..planning to add 2 coats every yr. reason why i need a super thick coat is becos my estate CP has ALOT of irritating pickup trucks and lorries parked here. the way they swing the door is horrible. Honda paint is famous for being thin. Prev accord kena paint chips..6 paint chips in 5mths. it only had 2 layers of 5H glass coating then for showroom shine, easy cleaning and water sheeting... if coating doesn't work to prevent some scratches and chips,i wud have to go for clear sheets installed for the doors..but those r expensive!
Edited by Rationalexuberance, 08 February 2015 - 01:35 AM.
Hi guys. I'm been lurking in this thread for some time ever since I saw a black Vezel parked near my house. There's really a ton of useful information here and I appreciate everyone sharing their experience here.
�
I'm one of those conservative types who prefer to buy from Kah Motor because I've heard about the horror stories about buying from PI. And finally, it seems like Kah Motor will bring in the HR-V this year. I expected the higher pricing, but the spec sheet showing "Halogen lights" (I'm assuming they're the typical yellow lights) for all 3 models really made me think twice about buying from them. That is probably the one thing I was looking forward to in any new car I'm getting, and it makes no sense to me because the X and S models have white LED lights.
�
I have a few questions about buying cars from PI.
�
If I buy from a PI, can I still go back to KM workshops for servicing?
�
Bro... These are stuffs to take note
Headunit (min avh2650bt)
Steering audio control (X model and above)
Leather seats
Vezel floor mat
Solar film
Window visors
Front and reverse sensors (comes with reverse cam)
Front and back cameras
GPS
Boot tonneau cover
Vezel boot mat
Free servicing
Are these the standard packages I should ask for when I buy the car? Do PI really throw in window visors and front/back cameras, cos I had to buy them on my own for my Jazz. Should I make sure the electrical retractable side mirrors are included too, as I've read that someone's X model didn't have the steering audio control even though that's supposed to be standard for that model?
�
�
There are also generally 2 types of PI; direct importer and non direct, meaning they buy from other PI that import the cars before selling to you. From what I have been told, direct importers are bound by LTA to repair any car recalls even after warranty period, FOC.
Where can I check which PI are direct importers?
how much did they coat? i found 5 layers 9H ceramic $500 kangtao which i haggled for that offer. 5 yrs warranty with min $100 a year "servicing" somehow i dun mind that $100 a yr..planning to add 2 coats every yr. reason why i need a super thick coat is becos my estate CP has ALOT of irritating pickup trucks and lorries parked here. the way they swing the door is horrible. Honda paint is famous for being thin. Prev accord kena paint chips..6 paint chips in 5mths. it only had 2 layers of 5H glass coating then for showroom shine, easy cleaning and water sheeting... if coating doesn't work to prevent some scratches and chips,i wud have to go for clear sheets installed for the doors..but those r expensive!
Wow, 5 layer for that price is cheap, if compare to other. Can I know what company is that?
He quote me $750 coat 2 layers on the exterior, 1 layer on windows and rims with 5 year warranty any time can go back if any problem..
Saw it online, clear sheets once you remove you car paint Colour will change and you need to respray again, not sure is true or not.
Hi guys. I'm been lurking in this thread for some time ever since I saw a black Vezel parked near my house. There's really a ton of useful information here and I appreciate everyone sharing their experience here.
�
I'm one of those conservative types who prefer to buy from Kah Motor because I've heard about the horror stories about buying from PI. And finally, it seems like Kah Motor will bring in the HR-V this year. I expected the higher pricing, but the spec sheet showing "Halogen lights" (I'm assuming they're the typical yellow lights) for all 3 models really made me think twice about buying from them. That is probably the one thing I was looking forward to in any new car I'm getting, and it makes no sense to me because the X and S models have white LED lights.
�
I have a few questions about buying cars from PI.
�
If I buy from a PI, can I still go back to KM workshops for servicing?
�
Are these the standard packages I should ask for when I buy the car? Do PI really throw in window visors and front/back cameras, cos I had to buy them on my own for my Jazz. Should I make sure the electrical retractable side mirrors are included too, as I've read that someone's X model didn't have the steering audio control even though that's supposed to be standard for that model?
�
�
Where can I check which PI are direct importers?
Bro... Ur questions need to talk over kopi :)
Tak, on 08 Feb 2015 - 12:35 AM, said:By the way any bros warranty by Hitachi Capital? Any idea which WS they use?
http://www.wesleynet...hp?Co_Code=1218
�
https://www.facebook...142681802582519
�
�
There are 3 locations for Hitachi Capital.
�
- Hitachi Capital�(Jun Taiyo)
- Quick Lane (Alexandra)
- Quick Lane (Ubi)
Edited by trajet2b, 08 February 2015 - 07:34 AM.
my ride also had some vibration noise i thought was coming from my dashboard. guess what..it was actually my front recording camera vibrating. perhaps it was at its resonating frequency hence e larger resonance. used my fingers clamp it a while it stops.
Thanks for sharing. My car is still very original.. yet install car cam etc.
how much did they coat? i found 5 layers 9H ceramic $500 kangtao which i haggled for that offer. 5 yrs warranty with min $100 a year "servicing" somehow i dun mind that $100 a yr..planning to add 2 coats every yr. reason why i need a super thick coat is becos my estate CP has ALOT of irritating pickup trucks and lorries parked here. the way they swing the door is horrible. Honda paint is famous for being thin. Prev accord kena paint chips..6 paint chips in 5mths. it only had 2 layers of 5H glass coating then for showroom shine, easy cleaning and water sheeting... if coating doesn't work to prevent some scratches and chips,i wud have to go for clear sheets installed for the doors..but those r expensive!
Can share the contact? See a lot bros doing paint protection. My heart moved...haha. Got my car for 1 month liao, car wash every week. Yet doing much for my baby.
Can share the contact? See a lot bros doing paint protection. My heart moved...haha. Got my car for 1 month liao, car wash every week. Yet doing much for my baby.
hi sis, will let you guys know soon. they said they wanted to feature my car on fb ad hehe. mayb by then i share the page
Anyone has or have plan to install strut bar? I have friends that ask me to do this to stabilize the car due to the higher CG. I am hesitating as I do not wish to alter the car stability.
Is it available in the market already? The most effective way to reduce body roll is to lower the height and increase anti roll bar size. Too bad vezel come with torsion beam set for the rear.
When is the kopi session? I also want to kepo as wellBro... Ur questions need to talk over kopi :)
Anyone tried twisting the steering wheel slightly when come to a complete stop with start/stop activated?
It actually kicks start the car as it you have let go the brake pedal to start the car to go.
Try it.
�
No wonder. I was wondering why the engine started automatically even though the brake pedal was not moved. Thanks for the info.
hi sis, will let you guys know soon. they said they wanted to feature my car on fb ad hehe. mayb by then i share the page
Please share the contact with me too for the ceramic 9H. A new company? Thanks!
Hi, everyone,
�
I am new to this forum and I'm reading this because I am looking to buy a Honda Vezel :)
�
The list of PIs and the things to ask/negotiate for will prove to be very helpful to newbies like me who has never bought a new�car before. Yes, I am super green and most likely will be taken as a carrot top when I see the sales execs :(
�
I note that there has not been many recommendations for PI except for Mistercar in this forum. I do see a lot of you going to Hup Long and Leco though. So perhaps I will go to them as well since I do not know any better.
�
Just wanna say thank you and hope to see more joiners to this excellent forum!
�
�
�
Just curious what grade if fuel u guys are using? Recently did my 1k servicing milage keeps hovering ard 12.5km/l. Using spc 95. With eco mode on and doing 50/50 city highway.
�
I have been pumping SPC 95 since day 1. FC consistently is about�16km/l so far. Like I said before, no ECO mode,��start-stop on and about 70% express way. I must say, my driver (wife la)�is a bit heavy footed.
how much did they coat? i found 5 layers 9H ceramic $500 kangtao which i haggled for that offer. 5 yrs warranty with min $100 a year "servicing" somehow i dun mind that $100 a yr..planning to add 2 coats every yr. reason why i need a super thick coat is becos my estate CP has ALOT of irritating pickup trucks and lorries parked here. the way they swing the door is horrible. Honda paint is famous for being thin. Prev accord kena paint chips..6 paint chips in 5mths. it only had 2 layers of 5H glass coating then for showroom shine, easy cleaning and water sheeting... if coating doesn't work to prevent some scratches and chips,i wud have to go for clear sheets installed for the doors..but those r expensive!
�
I would advise bros here�to find out more on ceramic coating before proceeding. It is definitely not scratch proof. My petrol inlet cover was accidentally scratched by the pump attendant while pushing�the pump nozzle into the tank's inlet. I guess there is no such thing as scratch proof coating. However, it did help to lighten the scratch mark.
�
I have been pumping SPC 95 since day 1. FC consistently is about�16km/l so far. Like I said before, no ECO mode,��start-stop on and about 70% express way. I must say, my driver (wife la)�is a bit heavy footed.
�
Thanks for the info bro. Will continue to monitor my FC. I am also quite heavy footed. Usually hitting 2k to 3k rpm upon acceleration from stop.
Hi all bros,
�
do you all�have concern regarding having additional hard objects install at the airbag areas (steering wheel, dashboard). I am thinking that when the airbag activates, these items may accidentally throw at the passenger or driver at very high speed thus causing serious�injury. Example are :
�
the round ring:
http://item.taobao.c...e6-26a1cc7db645
�
and the steering wheel metal "V":
�
http://item.taobao.c...bucket=7#detail
�
Thanks.
Just hit half tank, very happy with the consumption, at least 40% better than my old ride. Without Econ mode
�
That's very good FC, considering the tank capacity of Vezel is 40 litres, means you're getting 20km/l FC.�
�
I would advise bros here�to find out more on ceramic coating before proceeding. It is definitely not scratch proof. My petrol inlet cover was accidentally scratched by the pump attendant while pushing�the pump nozzle into the tank's inlet. I guess there is no such thing as scratch proof coating. However, it did help to lighten the scratch mark.
Of course no scratch proof one lah, probably more like scratch resistance. My bumper kena minor scratch last week also.
Hi, everyone,
�
I am new to this forum and I'm reading this because I am looking to buy a Honda Vezel :)
�
The list of PIs and the things to ask/negotiate for will prove to be very helpful to newbies like me who has never bought a new�car before. Yes, I am super green and most likely will be taken as a carrot top when I see the sales execs :(
�
I note that there has not been many recommendations for PI except for Mistercar in this forum. I do see a lot of you going to Hup Long and Leco though. So perhaps I will go to them as well since I do
not know any better.
�
Just wanna say thank you and hope to see more joiners to this excellent forum!
�
�
I think Hup long & leco is within same building in Ubi. Listed down all the free gifts and chiong ah. Remember to negotiate for guarantee COE with no top up, high rebate and not those 6 bids.
Today I saw a White Vezel at Takashimaya around 2pm+ till 4+ and we left at the same time...
�
can't wait to get mine this coming week..
�
I would advise bros here�to find out more on ceramic coating before proceeding. It is definitely not scratch proof. My petrol inlet cover was accidentally scratched by the pump attendant while pushing�the pump nozzle into the tank's inlet. I guess there is no such thing as scratch proof coating. However, it did help to lighten the scratch mark.
yeh definitely not scratch proof..my prev ride had cats claw marks. however the visible scratch seen is on the coating,unless super deep svratch by penknife then sure enter paint level..a quick hand polish faded the marks significantly..i tink if they touch up for me free by adding coating wud be fine. but b4 i went for touch up i sold my prev ride alredy haha..buyer urgently needed handover..wud have been nice to see how the complimentary after sales service was...buyer of my prev ride wud also enjoyed e freebie
Hi, everyone,
�
I am new to this forum and I'm reading this because I am looking to buy a Honda Vezel :)
�
The list of PIs and the things to ask/negotiate for will prove to be very helpful to newbies like me who has never bought a new�car before. Yes, I am super green and most likely will be taken as a carrot top when I see the sales execs :(
�
I note that there has not been many recommendations for PI except for Mistercar in this forum. I do see a lot of you going to Hup Long and Leco though. So perhaps I will go to them as well since I do not know any better.
�
Just wanna say thank you and hope to see more joiners to this excellent forum!
�
�
�
Ya, Hup Long seems to�appear quite a lot in the collected section..
�
If you see the latest list, there is one from Hup Long, jan delivery, still in the booked section.
Not sure what is the issue? may be too many orders and cannot support all of them?.
Hi Guys, newbie here. Where would you recommend that I get Vezel from? I am quite worried due to horror stories of PI dealers. Thanks!
went for my 5k servicing this past weekend and saw a white vezel ending with "25" as well! decided against topping up for fully synthetic EO for $50 more.. so still running on mineral for the next 5k.. seems like only yesterday we collected the car!
�
with the recent discussion on paint protection, im wondering if it might have helped with the scratch i got.. a long one on my rear passenger door! wonder who is the culprit! heart very pain!! �
When is the kopi session? I also want to kepo as well
08 February 2015 - 11:11 PMCool88yes definitely kopi session. I'm going to make a booking on the next bidding. Hope to know more on what to watch out before i bargain with the dealers.
So far i have shortliated leco prestige, and cartimes.
today i saw leco prestige offer 109k nterst with coe rebate at 58k�
Bro, visit and talk to at least 3 PI before you commit, the more you nego, the better you are...
And remember to ask plenty of questions, and ask for the must have freebies
08 February 2015 - 11:15 PMRationalexuberancedo be gentle on the revs on mineral. for us in sg,the start stop kind of traffic requires us to service frequently. according to a table my mechanic fren showed me is abt 8000km for our traffic. european countries or USA they do alot more cruising than us hence the table shows 15-20k on full syntheticwent for my 5k servicing this past weekend and saw a white vezel ending with "25" as well! decided against topping up for fully synthetic EO for $50 more.. so still running on mineral for the next 5k.. seems like only yesterday we collected the car!
�
with the recent discussion on paint protection, im wondering if it might have helped with the scratch i got.. a long one on my rear passenger door! wonder who is the culprit! heart very pain!! �
Edited by Rationalexuberance, 08 February 2015 - 11:16 PM.
08 February 2015 - 11:19 PMsaysay�
�
I like this too. But my HU does not come with HDMI port and it has only 1 USB port. Give up the idea some time ago. Sianz...
�
pokadot, how does HDMI/USB port in HU affect installation of the USB/HDMI panel?� I thought can just buy and then go to any workshop for installation?
�
I am keen to install the panel but not sure whether it can be done in my yet to be registered vezel or not.
�
Edited by saysay, 08 February 2015 - 11:31 PM.
08 February 2015 - 11:35 PMLawrenceLee_110640Actually what's the difference of using mineral and synthetic oil?
09 February 2015 - 01:01 AMInitialE24hi sis, will let you guys know soon. they said they wanted to feature my car on fb ad hehe. mayb by then i share the page
Looking forward to the Lobang..
09 February 2015 - 01:27 AMwklohHi Vezelers, i was quoted $500 just to upgrade my headunit from a 1650DVD to 2750BT. After scouting around the HU market, i found a shop selling a 5750BT for $550 cheapest cash and carry option. So i intend to buy that and get the installer to install for me when my car reach spore shores. My question is Will my 1650DVD be sellable at $300 ? Or what should the proposed price be for it to be cheaper than shops but not so cheap to spoilt market rate
Do take note that installer might not want to install for you if it is not bought from them. Do check beforehand..
09 February 2015 - 07:16 AMtrajet2bHi Guys, newbie here. Where would you recommend that I get Vezel from? I am quite worried due to horror stories of PI dealers. Thanks!
Bro,
In your enthusiasm of negotiating for a cool deal, please take care on how to protect your deposit.
In any con case, what ever contract you have them write on�your sales agreement is useless.
�
So, try to balance out, not paying ridiculously high price�for security.�
�
Don't rush.�
09 February 2015 - 07:23 AMtrajet2bi ordered mine from HL coz they hv a reputable for fast and reliable..
�
thought he did say that may not be in time for CNY, me still holding out hopes that i can get it lor.. since i bought ages ago...
hope to have a happy new year siah...�
�
HL should compensate you for the late delivery since you are paying premium.
�
Hopefully, you can get your ride before CNY.
09 February 2015 - 07:59 AMLEESTi stay near west coast plaza...but mine is hybrid,not sure if can compare on engine idling sound and vibration
Bro, thanks. Will see how the arrangement. Will pm younif need to.
09 February 2015 - 09:24 AMpokadot�
pokadot, how does HDMI/USB port in HU affect installation of the USB/HDMI panel?� I thought can just buy and then go to any workshop for installation?
�
I am keen to install the panel but not sure whether it can be done in my yet to be registered vezel or not.
��
�
The HU will not affect the installation of the panel, i.e. physically it does not get in the way. What I meant is that the ports on the panel will not be useful unless it is connected some of kind device like a HU. Basically, it acts like an intermediary because there is no easy way to access the ports behind the HU. My HU is Pioneer 2650BT. It does not come with HDMI port and only has 1 USB port. Next time, if I upgrade to Pioneer 8650BT, I may consider installing the panel. Right now, I just work live with 1 USB cable lying beneath my central console near the 12V plug.
09 February 2015 - 09:34 AMlimejuiceCan share the contact? See a lot bros doing paint protection. My heart moved...haha. Got my car for 1 month liao, car wash every week. Yet doing much for my baby.
�
Please share contact too! Thks!
09 February 2015 - 10:11 AMLawrenceLee_110640So anyone can advise me on the difference of using Mineral and Synthetic oil for car? Better engine protection or?
09 February 2015 - 10:11 AMwkloh�
Bro, so your opinion means I should use the start/stop engine or ? I still haven't get my car yet, so I just reading up on all of this theories u all put on this forum for reference.
Or should I just use the start/stop engine since it's already there for us to use?
IMHO, use it. It has nothing to do with engine but more on the Starter Motor & Battery, which is resolved by introducing of Capacitors at the back of the boot. Anyway, you do have a choice to step harder on the brake to trigger it when necessary. Ultimately, must belive the basic theory that Honda also won't wish to tarnish their reputation over an "innovation" that has been around for quite a while. As some of the Bro mentioned in this forum, u already pay for it, use it. =P
09 February 2015 - 10:14 AMLawrenceLee_110640IMHO, use it. It has nothing to do with engine but more on the Starter Motor & Battery, which is resolved by introducing of Capacitors at the back of the boot. Anyway, you do have a choice to step harder on the brake to trigger it when necessary. Ultimately, must belive the basic theory that Honda also won't wish to tarnish their reputation over an "innovation" that has been around for quite a while. As some of the Bro mentioned in this forum, u already pay for it, use it. =P
�
lol, ok, thanks bro. Well, since it's there...i just use it.
09 February 2015 - 10:16 AMMagTKI am new here and is planning to order a vezel x model from Leco prestige at Turf City.� Anyone here has any feedbacks on Leco?� I understand that quite a number of owners bought from them and I trust that they are the more reputable one?� I was told that I need to put a deposit of 20K and is that the norm?� Any feedback or things that I should ask or lookout for would be greatly appreciated.... :)�
�
�
09 February 2015 - 10:18 AMwklohThat's normal behaviour. Power Steering pump is link with engine. So when you steer, the PS-pump need to work. So it will tell the engine to work. So engine will start..Anyone tried twisting the steering wheel slightly when come to a complete stop with start/stop activated?
It actually kicks start the car as it you have let go the brake pedal to start the car to go.
Try it. 09 February 2015 - 10:56 AMwklohIf you are 50/50 journey, then i think your millage is correct.Just curious what grade if fuel u guys are using? Recently did my 1k servicing milage keeps hovering ard 12.5km/l. Using spc 95. With eco mode on and doing 50/50 city highway.
I am 85-city/15-HW. And so far i had been monitoring (manual calculation method) on every tank :
Tank-1 = 12.06-km/L (Eco On, Start/Stop On, rpm <3,000)
Tank-2 = 12.00-km/L (Eco On, Start/Stop On, rpm <3,000)
Tank-3 = 12.28-km/L (Eco Off, Start/Stop On, rpm will) travel from West to East very high speed
Tank-4 = 11.55-km/L (Eco Off, Start/Stop On, rpm will, *Rear tyre pressure reduced from 230 to 220))
Tank-5 = 10.63-km/L (Eco Off, Start/Stop On, rpm will, *Rear tyre pressure reduced from 230 to 220)
* this is a sure killer. I really can feel it. The up side is, the ride is less bumpy.
I tahan for 1-tank plus in order to prove myself. For me, I decided to opt for FC & be more turtle speed over hump & avoid pit holes as much as i can.. Topping up N2 shortly.. =)Hi all. vezel only got 1 white right? Which is pearl white? Any white vezel owner need to do top u $$ to get pearl white?
No needBy the way any bros warranty by Hitachi Capital? Any idea which WS they use?
They using HITACHI CAPITAL Lok Yang or Quick Lane Alexandra or Ubi Under Sime Darby Group.
So far I used the Lok Yang 1, very clean, well organised & discipline.
Edited by wkloh, 09 February 2015 - 10:49 AM.
09 February 2015 - 11:01 AMCredor�
Hi LEEST,
�
I stay around Upper Thomson and just collected the car over the weekend. Don't mind meeting up with you, also wanna learn more about the car
Bro oxycover
Glad to see bro/sis helping around each other :)
5 praise point for you.
Btw, dun known bro LeeSt.
09 February 2015 - 11:02 AMwklohhow much did they coat? i found 5 layers 9H ceramic $500 kangtao which i haggled for that offer. 5 yrs warranty with min $100 a year "servicing" somehow i dun mind that $100 a yr..planning to add 2 coats every yr. reason why i need a super thick coat is becos my estate CP has ALOT of irritating pickup trucks and lorries parked here. the way they swing the door is horrible. Honda paint is famous for being thin. Prev accord kena paint chips..6 paint chips in 5mths. it only had 2 layers of 5H glass coating then for showroom shine, easy cleaning and water sheeting... if coating doesn't work to prevent some scratches and chips,i wud have to go for clear sheets installed for the doors..but those r expensive!
Already experienced. Coat is for acid/chemical, hairline scratches & easy maintenance.
Impact against stone or metal, totally vulnerable. If really want tahan impact, at the moment can only think of PPF.
09 February 2015 - 11:04 AMCredor-
Edited by Credor, 09 February 2015 - 11:06 AM.
09 February 2015 - 11:16 AMLawrenceLee_110640Already experienced. Coat is for acid/chemical, hairline scratches & easy maintenance.
Impact against stone or metal, totally vulnerable. If really want tahan impact, at the moment can only think of PPF.�
hi, what is PPF? new to this coating thing.
09 February 2015 - 11:17 AMwklohHi guys. I'm been lurking in this thread for some time ever since I saw a black Vezel parked near my house. There's really a ton of useful information here and I appreciate everyone sharing their experience here.
�
I'm one of those conservative types who prefer to buy from Kah Motor because I've heard about the horror stories about buying from PI. And finally, it seems like Kah Motor will bring in the HR-V this year. I expected the higher pricing, but the spec sheet showing "Halogen lights" (I'm assuming they're the typical yellow lights) for all 3 models really made me think twice about buying from them. That is probably the one thing I was looking forward to in any new car I'm getting, and it makes no sense to me because the X and S models have white LED lights.
�
I have a few questions about buying cars from PI.
�
If I buy from a PI, can I still go back to KM workshops for servicing?
�
Are these the standard packages I should ask for when I buy the car? Do PI really throw in window visors and front/back cameras, cos I had to buy them on my own for my Jazz. Should I make sure the electrical retractable side mirrors are included too, as I've read that someone's X model didn't have the steering audio control even though that's supposed to be standard for that model?
�
�
Where can I check which PI are direct importers?
About the servicing, I heard that if buy from PI then intend to go to AD arms, need to pay an "adoption fee" which end up maybe close to the cost of buying it from AD. Furthermore, the warranty most likely will be voided.
How much freebies can obtain actually depends quite a lot on your negotiation power & the generosity of the PI. As for the retractable side mirrors are original come with car. Only "S" model come with audio control steering. "X" model is add on item, again depend on your bargaining power.
09 February 2015 - 11:53 AMwkloh
Không có nhận xét nào:
Đăng nhận xét